Copy Data From Two Columns To Others
Feb 19, 2007
I have attached an Excel workbook to try to help explain my problem. At the moment I am completing the following process manually but wonder if anyone knows of a way I can automate the process:
The data collected from the instrument are in columns A and B. I need to copy the data from A2:A99 (i.e. the highest angle to the lowest angle) into column G (starting in cell G9). Then copy the corresponding torque values in B2:B99 into column E (starting in E9). I then need to copy the next string of data from A100:A210 (i.e. lowest angle to the highest angle) into column AU (starting in cell AU9) and again copy the corresponding torque values in B100:B210 into column AS (starting in cell AS9).
I need to continue this process of copying the highest angle to lowest angle then lowest angle to highest angle and the corresponding torques from columns A and B respectively into the following columns.
Column Copied To Copy From A Copy From BRow Number
O M 211:323
BC BA 324:427
W U 428:533
BK BI 544:634
AE AC 635:738
BS BQ 739:842
AM AK 843:947
CA BA 948:1052
To complicate things slightly I have many data sets that I need to do this with and need to be able to use the formula or macro to also process these, however the length of the string of data (i.e. the number of values between highest and lowest angles) is different for each string of data therefore it is not as straightforward as copying the same number of values each time, so the formula or macro needs to look for the highest angle then the lowest followed by the lowest angle then the highest.
I would be extremely grateful for any suggestions or help you may be able to provide as this could save me days of data processing.
View 9 Replies
ADVERTISEMENT
Jan 18, 2013
If I just one number in each each (row 1-100) for example, but in different columns, is there a way I can copy all of these numbers so that they are all in the same column--that is, they would stay in the same row but now they would also be in the same column.
View 2 Replies
View Related
Jun 1, 2009
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
View 12 Replies
View Related
May 3, 2013
I have this formula:
=IF(T8=2,"6",IF(T8=1,"3",IF(T8=0,"0")))+IF(T9=2,"4",IF(T9=1,"2",IF(T9=0,"0")))+
IF(T10=2,"6",IF(T10=1,"3",IF(T10=0,"0")))+IF(T11=2,"4",IF(T11=1,"2",IF(T11=0,"0")))
and when I copy it down, I would like all the t's replaced by u's (since the data is in columns)
View 6 Replies
View Related
Dec 3, 2008
I want a macro that copies all columns data in coulmn a which starts from row 2 and delete rest of columns data.
see mentioned below example....
View 9 Replies
View Related
Feb 18, 2014
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
View 2 Replies
View Related
Feb 18, 2014
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies
View Related
Jan 10, 2009
How can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies
View Related
Sep 7, 2007
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
View 2 Replies
View Related
Dec 4, 2012
My data looks like this in one sheet:
A
2
B
C
D
1
E
F
3
G
H
I
Where A is associated with 2 other letters, B and C. D is associated with one other letter, E, and F is associated with 3 other letters. I want an automated way to paste this into 2 columns in a new sheet, like this:
A
B
A
C
D
E
F
G
F
H
F
A
2
B
C
D
1
E
F
3
G
H
I
View 2 Replies
View Related
Apr 18, 2014
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
View 3 Replies
View Related
Jul 10, 2014
I have some data from many csv files.
I would like to record/create a macros to open the file and paste 4 columns worth of data into another spreadsheet. Making sure the data is pasted in the correct column and doesn't overight data already in a tracker. Ie. paste it into the next available space.
Output.csv
View 9 Replies
View Related
May 25, 2013
I am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
View 9 Replies
View Related
Apr 29, 2014
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
View 14 Replies
View Related
Mar 9, 2012
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
=IF(ISNUMBER(MATCH(G1606,Data!$EO$527:$EO$601,0)),INDEX(Data!$EO$527:$EQ$601,MATCH(G1606,Data!$EO$527:$EO$601,0)),"Not Found")
View 7 Replies
View Related
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
Feb 20, 2014
I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:
[URL] ........
View 9 Replies
View Related
Mar 8, 2014
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type
Make
Model
Serial
Location
To Be Performed
Frequency
Last Performed
Performed By
Next Due Date
R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
View 1 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
Apr 21, 2007
Sub moveit()
Dim MyRows As Double
Dim TotalRows As Double
Dim Counter As Double
Dim StartRange As Variant
Dim Newrange As Variant
MyRows = InputBox("This macro will copy and paste the current data into mupltiple columns. Make sure that you have at least one cell in the targetted region of data selected. How many rows deep do you want the finished data to be?") - 1
StartRange = ActiveCell.CurrentRegion.Cells(1).Address
TotalRows = Selection.CurrentRegion.Rows.Count
Counter = 1
Do Until Counter > (TotalRows / (MyRows + 1))
Newrange = Range(Range(StartRange).Offset((Counter * MyRows) + Counter), Range(StartRange).Offset((Counter + 1) * MyRows + Counter, 2)).Address
Range(Newrange).Copy Destination:=Range(StartRange).Offset(0, Counter * 3)
Counter = Counter + 1
Loop
End Sub................
View 4 Replies
View Related
Nov 21, 2011
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
View 2 Replies
View Related
Apr 11, 2014
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
View 3 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Aug 6, 2009
Example:................
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
View 7 Replies
View Related
Jun 7, 2006
I have 2 worksheets in which I have to copy one column of cells from one to
the other. The problem is that the "main" worksheet lists nearly 3,500
clients and I have to copy numbers into the "main" worksheet on weekly basis
from another worksheet that lists only about 1,100 of those 3,500 clients.
Both client lists are in alphabetical order, but I obviously cannot just copy
one column into the other, because then the numbers won't be matching the
correct clients.
View 10 Replies
View Related
Apr 21, 2007
I have 2 workbooks (workbook1 & workbook2). Information in column A and column N must match both workbooks per row/ cell (ie. if A2 and N2 in workbook1 match workbook2, copy information from 3 other columns (S, T, U from from workbook1 into workbook2 - cells S2, T2, U2). Workbook2 may have information in column S, T, U, but I need to over-write it with the information from workbook1. If the information does not match per that row/cell (ie. A2 in both worksheets are the same, but N2, they are not, so go to the next line that does match and copy the information into worksheet2). I do not want to use a V- lookup for this problem. I really need a marco.
View 3 Replies
View Related
Jun 24, 2008
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies
View Related
Apr 17, 2013
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
View 3 Replies
View Related
Feb 20, 2009
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
View 7 Replies
View Related
