how to copy certain columns using macro code. I have attached a sample file and shaded the cells that I want the macro to select for me.
The problems I face are
1. Cells are merged.
2. Cell in one row has 2 sub divisions on the row below.
Also the row headers always will not be in the same columns. I need to use VLOOKUP or HLOOKUP to find out whether the column am searching is the actual one I want.
For example I need to search for Name using VLOOKUP / HLOOKUP and then copy the names under them. Similiarly to all the other cells that I need.
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
I am looking to copy the columns containing firstly H and then A from this sheet (sheet 1) to sheet 2. At the moment the H and A run in sequence, sometimes 2 or 3 times in a row but I want them to appear seperatly in sheet 2 so that I have all of the H's together in a sequence and all of the A's together in a sequence further down the sheet. I haven't used macros since school and don't have the first idea where to start. Do I need macros or is there a simple formula I can input? The data I am looking to copy is below with the letters in question 3 rows down.
How do I copy the contents in column C on sheet 1 to column A on sheet 2?
When I export from quickbooks it is going to replace sheet 1 with updated items and prices. So I want sheet 2 to have the same information so it retains my formulas in other columns?
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
I've searched and tried some similar examples but cannot find a fit that works. I have two columns of data on the same worksheet- IO2 & IR2 (3 columns apart) that will have varying end lengths. I need to combine these into one column on a different tab ( cell A8)- one on top of the other. When it gets to the first blank cell I want it to stop and grab the second column till it gets to the first blank cell. Note-these columns need to stay in the current order but format will not matter. It sounds so simple but I cannot make a formula or macro do what I need it to. I would prefer a macro because the workbook is already so slow.
There is a second part too (but I couldn't even get past the first!). Once the above is done. I will actually have the process repeat and return two different columns next to each other. I then want to reference these two columns and a month and find the correlating set of date in the first worksheet and bring it over. Here is the current macro I was trying (for part 1) but I can only get 1 column returned.
Sub FCST() Dim improw As Long, impColumn As Long, MyCell Dim ws1 As Worksheet, ws2 As Worksheet Dim improw2 As Long, impcolumn2 As Long Application. ScreenUpdating = False Set ws1 = ActiveWorkbook.Sheets("Marketing") Set ws2 = ActiveWorkbook.Sheets(" Forecast") improw2 = 8 impcolumn2 = 1 impColumn = 249 Do Until impColumn = 252 improw = 2 Do Until improw = 11078 'this is the number of possible entries in each column.........................
I was wondering if there was an easy way to copy columns (headings) and the formulas to a new sheet. I'm currently working on Sheet 1, need to copy everything onto a new sheet so I can keep things separated by week..
Example, Sheet 1 is Week October 30th, would like my 2nd sheet to have same exact headings and formulas which I would then rename to Week Nov. 1st etc..
Also, is there a way that I can then copy the 4 sheets that would make up a month into a new spreadsheet so I can then start December...
I need to copy 120 columns from one sheet to a new. The columns needs to be in a certain order. So I need fx. from the original sheet column 2 is called "number" and I need that column to be put in new sheet as column 1 with new headline "no." Guess I need almost the same code for all of the just with different names etc.
I also need to put in blank columns with specific headlines in between some columns - so fx. in column 4 I need a blank column with headline "search"..
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
I’m trying to do is identify duplicates in a LARGE column of numeric data. As a matter of fact, it’s about 112,000 rows which won’t fit on one spreadsheet since a spreadsheet can only handle 65,536 rows. So the caveats are that the information needing scanned for duplicates is all ONE body of data even though it is on 2 spreadsheets so I am not comparing one sheet of information to the other rather all 112,000 lines need checked for duplicates as a whole. Once duplicates are found I would like them to be highlighted in yellow on the original 2 worksheets but then also have the duplicates copied to a new sheet.
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row. I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary() Application.DisplayAlerts = False On Error Resume Next Sheets("Summary").Delete Application.DisplayAlerts = True n = Application.Worksheets.Count
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type Make Model Serial Location
To Be Performed Frequency Last Performed Performed By Next Due Date R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
The key point is that I have over 400 columns grouped in three, offset by one row down for each (this is due to a different formula I have working). Each column is 60 numbers long (not including empty cells above data). I want to copy all of these columns into a single set of three columns on another sheet (Sheet2). (These will be the fifth, sixth, and seventh columns, E, F, and G. If it would be simpler, I could simply copy the third of each set of columns on Sheet1 (C, F, I) to column G of Sheet2. Then there would be a total of 144 columns being copied (60 numbers per column).) All of this copying has to be values-only as the original columns consist of formulas referencing outside cells. Sheet2 should look like this:.............
for example here i want to keep only gen, red and white columns only out of columns what i have in my data. I have so many columns in my original data but here i given just small example. How to proceed with macro or any other way because removing manually taking long time for me.
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A Mr. Jones 3B 3B 3B Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri 1A 1B 2A 2B 3A 3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available") It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
