I am trying to copy some cells from a worksheet and do a paste special to paste values at a different location.
But I am getting this error 400.
VB:
Sub CopyFeedResultData(inc As Integer, Feed_Fraction)
'
' CopyFeedResultData Macro
[Code].....
I have a macro which allows a user to paste a list of equipment ID names into a range. The macro will then make a copy of a template worksheet for each equipment ID and add it to the workbook. I find that when I run this for more than 20 or so equipment IDs the macro will fail without an error. Even when I stop the macro I cannot manually copy worksheets. It seems to be a memory issue. If I save and close the sheet and re-open I can copy and paste manually again.
The particular section of code where the macro hangs is the third line of the for loop below.
Code:
For Each c In Selection.Cells
tName = c.Value
Sheets("Template").Select
Sheets("Template").Copy Before:=Sheets("Definition")
ActiveSheet.Name = tName
...more operations...
Next c
how to prevent this happening or more details on what is going on?
I'm having troubles with the worksheet.copy method. Here's the deal...
I have a workbook with 10 worksheets. Each is it's own report template. I want to open the template workbook and copy just one worksheet to a new workbook.
Here's my code. Sometimes it works. Other times I get a Run-time error 1004....
I have a form & in a command button that form I have code that is supposed to copy a worksheet named template into some position among the other sheets in the workbook. I am trying to set the new worksheet to some variable. The code actually creates the new worksheet where it's supposed to but I still get a run-time error 424. If I don't try to set the new worksheet to any variable the code exits fine.
Works but with Error - next to Last line
Private Sub CommandButton1_Click()
Dim wSheet As Worksheet
Sheet_before_name = ""
For Each wSheet In Worksheets
If UCase(wSheet.Name) > UCase(sheet_add_txt) Or _
wSheet.Name = "Template" Then
If Sheet_before_name = "" Then Sheet_before_name = wSheet.Name
End If
Next
Dim new_sheet As Worksheet
Set new_sheet = Worksheets("template").Copy(before:=Worksheets(Sheet_before_name))
End Sub
Works Fine
Private Sub CommandButton1_Click()
Dim wSheet As Worksheet
Sheet_before_name = ""
For Each wSheet In Worksheets
If UCase(wSheet.Name) > UCase(sheet_add_txt) Or _
wSheet.Name = "Template" Then
If Sheet_before_name = "" Then Sheet_before_name = wSheet.Name
End If
Next
Worksheets("template").Copy before:=Worksheets(Sheet_before_name)
End Sub
I have read through post after post on this forum about this error but nothing seems to apply. I can use Dave's suggestion in another post of just using the template sheet as an actual worksheet template, but Then I would have to modify other code that deals with formatting. I would have to get it to apply any formatting changes to this workbook & to the worksheet template.
I am copying a WorkSheet and I want to set it directly to an Object. I don't want to use the activeWorksheet. I does work like this with .add so my idea was it should work with copy too.
[Code] .....
It does Copy the Worksheet, but afterwards VBA gets error 424
SO how do I set a Workbook.copy ?
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
View 3 Replies View RelatedI've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
Using Excel 2003 and cannot copy a worksheet and am getting this error:
File not found: CDocumentTempVB4B.tmp
I have a strange problem with a spreadsheet I've set up. It has several tabs with multiple information on each. The sums on each individual tab are linked to the front tab (which I've used as a summary page), but I haven't put any other links in.
For some reason, when I type anything in certain cells on one of the tabs (including the summary but not just that), it appears also on all the others, not necessarily in the same place. If I delete it on the the other tabs where it shouldn't be, it deletes the original on the correct tab, which I want to keep. This has been going on for ages, it annoyed me so much I completely recreated the spreadsheet, from scratch, but it's still happening.
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
I would like a <worksheet> to be automatically locked if all the data entered is acceptable, I would also like a message box to come up saying this. But I would like to be able to edit the data with a message box coming up to warn that I am about to change the data.
View 4 Replies View RelatedI am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
[Code].....
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I have an excel workbook that I have created to use in the creation of purchase orders. I have a spot for the vendor in cell D10 and my items are in the range of B17 to N17.
What I would like to have is a macro that I can assign to a button that does the following.
I have a worksheet called "Purchase Order" that has all the information in it.
When you click on a button named "Process", it will take everything entered into B17 - N28 and copy it to a worksheet named "PO# History" starting in cell B2 and moving down. Each time I click on "Process" I need the information in the range above to get entered into the next empty line on the "PO# History" worksheet.
This way I can maintain a list of items purchased and then play with them in a pivot table/graph and such.
Also, What I need it to do also is when process is clicked, the macro needs to pull the vendor name from cell D10 and put it in column A on "PO# History" for each row it adds from B17-N28.
I want a worksheet to have alot of data from another worksheet that keeps being updated.
View 3 Replies View RelatedI have data that I need to copy into a new worksheet, that is fine, no problem, however, the range of cells that I need to copy is different each month, and as I am collating several different sheets into one new sheet, I need to be able to select the active range, I.E, the cells that contain data. This month the range is A2:P56, however, next month could be A2:P123. Is there any way I can use VBA to select the active range? Sorry if this is explained badly, its difficult for me to type what I want to say!
View 3 Replies View Relatedis it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies View RelatedI had originally posted this question on another thread since the problem i've been trying to solve is quite similar to the discussion on that thread.
I have a workbook with only one worksheet. This worksheet contains data in only the first column. However this data can be either tab or space delimited. The first few rows are junk data which i am not concerned with. I have a header and footer row and the useful cells are in between these.
What I am trying to solve is this:
1) Add a new worksheet, rename it to "COPY" and place it after the original sheet. This I have been able to achieve using the code below.
Dim PageSheet, CopySheet As Worksheet
Set PageSheet = ActiveSheet
PageSheet.Activate
Sheets.Add
Set CopySheet = ActiveSheet
CopySheet.Name = "COPY"
CopySheet.Select
CopySheet.Move After:=PageSheet ...............
I am looking for a visual basic script (macro) wherin I can copy fields from one sheet based on condition to main sheet. Sample sheet is enclosed as sample.xls. Here is what I intend to do: two tabs are there in sheet. master and work.
Need to check in "work" tab sheet if x name exists and if yes then copy three cells namely Input, Direct/.Indirect and code and paste all three cells in master sheet in front of X name wherever x name appears in resource name column.... Ultimately work sheet will be searched for all names which are in Master Tab and three field will be filled accordingly. Finally all the resources in resource Column will have three addditional field in mster sheet taken from work sheet.
I'm creating a simple program that copy one or more specific cell values and place it on a specific cell in another sheet using loop to make it easier... I'm having a difficult time trying to figure it out..
Example
from sheet1 A1:A5
Sheet1
A | B | C
1 P45
2 P46
3 P47
4 P48
5 P49
and place P45, P47 and P48 on another cell, to be specific in C1,C2 and C3, in a different sheet
Sheet2
A | B | C
1 P45
2 P47
3 P48
4
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 3 Replies View RelatedIam looking for macro to copy rows based on partial cell content of a column. I have an excel spreadsheet called "arc.xlsx" from which I would like to copy data to other few new excel files when certain criteria are met. The excel file contained location is C:Documents and SettingsxxxxDesktopCompany.
Below is a sample of arc.xlsx
GP CUST_NO BR CUST_NAME day mo year
I1 999999 1 SMITH 0 8 9
I1 999999 ab SMITH 4 8 9
I1 999999 cd SMITH 4 10 9
I1 999999 1 SMITH 4 1 10
[Code]...
I would like the macro to copy rows that have 'ab' in the column c (with title BR)and save it in a new excel file with name ab.xlsx in the same location folder.And the same for 'cd', '01' and '02' by saving the data in files with name cd.xlsx, 01.xlsx so on.
I need to copy certain values of multiple pivot tables of different worksheets into a new worksheet.
To be more clear I attached an example worksheet:
In "Sheet1_pivot table" and "Sheet2_pivot table" I have two pivot table with data divided by Area, Year, quarter and month.
In "Table" i have a summary table where, depending on the values of cell B2, B3 and B4, the summary table has different values copied from the 2 pivot tables.
I was thinking of a code like this but i have problems getting the values from the pivot tables
VB:
Sub else_if()
If Range("B2") = "North" And Range("B3") = "October" Then
ElseIf Range("B2") = "South" And Range("B3") = "October" Then
Else
.
.
.
.
Else
MsgBox ("Area not present")
End If
End Sub
Copy Ranges From all Sheets.xlsx
I need a macro that will copy a range of cells, it is always in the B2:B7 range from all the worksheets in a workbook. This is just a sample of the actual workbook, which has 100's of worksheets. The macro also needs to maintain any formatting [conditional or regular].that has been added to a particular cell. The ranges need to be pasted in a worksheet named "content" and arranged in columnar sequence, please see attached sample.
Here is the situation:
I have a worksheet called ORDER where I have pallets and their contents: 1 barcode per pallet and 9 barcodes per box (9 boxes on a pallet).
Capture.JPG
On another worksheet called DESPATCH, I am trying to get a formula so when I enter the pallet barcode *p2* for instance in a cell. it automatically shows the 9 boxes details (without having to scan each box again).
I have set up the attached workbook to try to show the results that I need using the matching shaded cells in the worksheets.
The first part of the problem is that all data in columns A, B, C & H (Input1) needs to be copied to columns A, B, C & F in Input2 with the addition of a Zero value in columns D & E (sample data lines 1 - 3).
The second part of the problem is that all data in columns A, B, & F (Input2) where the cell in column C is equal to ZERO needs to be copied to columns A, B & C in Input 3 (sample data Lines 4 - 11).
It would also be useful to be able to copy data in columns A, B, & F (Input2) where the cell in column C is NOT equal to ZERO to columns A, B & C in Input 3 (sample data Lines 12 - 25). However, there will be often be more than value in column C (Input2) dictated by the date in Column A and number in Column B. The value in Column F (Input2) will always be the same for each of those rows, so it does not need to be duplicated in Column C (Input3).
This would have to be manually triggered by linking it to a button or menu item, not sure what would be the best option. As data is entered at various times of the week, the routine would either have to overwrite existing matching data or carry on from where it last finished!
How to restrict copy paste for certain cells in excel?
For Example : Range ("A1:A20) and Range ("C5:C20")
I'm just trying to copy certain cells from one worksheet & add them to the next available row on the next sheet, my data is going right down to the end of the sheet though (row 1048554) & instead of placing them on the same row its placing them in the row underneath the previous data in the next column. My code is below & I've included a table at the very bottom of how the data is coming out.
Sub Copydata()
Range("A" & Rows.Count).End(xlUp).Offset(1).Select
Sheets("PO").Select
[Code]....
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code:
Sub test()
With Sheets("Invoice")
.Range("A4:C17").Copy
Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End With
End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
[Code].....