Macro To Copy Certain Cells And Paste To Another Worksheet
Nov 27, 2013
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code:
Sub test()
With Sheets("Invoice")
.Range("A4:C17").Copy
Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
End With
End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.
View 9 Replies
ADVERTISEMENT
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Dec 25, 2012
is it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies
View Related
Apr 10, 2013
How to restrict copy paste for certain cells in excel?
For Example : Range ("A1:A20) and Range ("C5:C20")
View 9 Replies
View Related
Feb 13, 2014
I would like to copy several cell entries from one worksheet ("Entry") and paste then into a new line of another worksheet ("Contact DB") which will serve as a repository/database. Ideally, I would like to clear the values in the first "Entry" worksheet once this is done.
The thing that is throwing me off is that the data entered into my first "Entry" worksheet is not all on one row. However, I have recorded all the starting point references and destination cells (i.e. "B2" from "Entry" --> "A5" of "Contact DB") so it's ready to go into code.
Using the following code (which I tested for copying and pasting the first cell of interest) but I can't seem to get it to work:
Code:
Public Sub Macro1()
Application.CutCopyMode = False
Sheets("Entry").Range("B2").Copy
Sheets("Contact DB").Range("A5").Paste
End Sub
I'm brand new to vba so I'm struggling to understand the code and where it goes. That brings me to Q2 (and a dumb one it is). Where do I put this code? I already have one bit of code (for allowing multiple entries in a dropdown list) for the "Entry" worksheet under the "Microsoft Excel Objects" folder. Is this where this copy and paste could would go too? Or do I need to insert a "module?"
View 2 Replies
View Related
Jan 16, 2014
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies
View Related
Aug 7, 2014
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
View 5 Replies
View Related
Aug 15, 2014
I want a macro which will copy all the data from sheet 1 in columns A:C ignoring any blanks
then paste it into the first free cell in column B of sheet 2
View 1 Replies
View Related
Mar 1, 2009
I have this Excel File which has some sheets. All sheets are the same format like this: "I have read-circled the cells of interest"
I want to have a macro that can read the data from all the sheets (regardless of their name) and from the specific cells "red-circled" and copy and paste them into new sheet named "Report" in table format. Like this:
View 9 Replies
View Related
Mar 15, 2013
I am looking to create a macro to be assigned to a button that copies the last row of data entered and then pastes it to the last empty row on a different worksheet. This is a dummy spreadsheet to work with (I have more data, but the concept is one in the same). Sheet1 ("Branch1"), Sheet2 ("Branch2"), and Sheet3 ("All"), the names in brackets are names of the sheets, but for ease I'll refer to them as Sheet1, Sheet2, and Sheet3. I have columns beginning in B as follows: Date, Branch, Currency, Coin, and Total (the branch and Total are tied to formulas, however I just need to the text values and formats to come over to the other worksheet). have the portion regarding the copy of the last row in Sheet1, however it won't PasteSpecial.Selection in Sheet3 as it says the cells are not sized or formatted correctly.
VB:
Sub CopyB2()
lr2 = Sheets("Branch2").Range("B" & Rows.Count).End(xlUp).Row
lr3 = Sheets("All").Range("B" & Rows.Count).End(xlUp).Row + 1
Sheets("Branch2").Range("B" & lr2).EntireRow.Copy Sheets("All").Range("B" & lr3)
End Sub
View 1 Replies
View Related
Aug 15, 2012
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies
View Related
Sep 19, 2012
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
View 9 Replies
View Related
Dec 4, 2009
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies
View Related
Jan 28, 2014
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
View 5 Replies
View Related
Feb 12, 2014
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
View 1 Replies
View Related
May 9, 2008
I want to copy text from a range of individual cells and then paste all of the individual cells copied and paste this data into a single cell with all the text separated by hyphens between the texts.
Example attached
If you are a macro writer i have a project that i need to complete. you will be compensated for your time.
View 9 Replies
View Related
Mar 26, 2008
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
View 9 Replies
View Related
Jul 15, 2014
I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
View 7 Replies
View Related
Oct 15, 2012
Iam looking for macro to copy rows based on partial cell content of a column. I have an excel spreadsheet called "arc.xlsx" from which I would like to copy data to other few new excel files when certain criteria are met. The excel file contained location is C:Documents and SettingsxxxxDesktopCompany.
Below is a sample of arc.xlsx
GP CUST_NO BR CUST_NAME day mo year
I1 999999 1 SMITH 0 8 9
I1 999999 ab SMITH 4 8 9
I1 999999 cd SMITH 4 10 9
I1 999999 1 SMITH 4 1 10
[Code]...
I would like the macro to copy rows that have 'ab' in the column c (with title BR)and save it in a new excel file with name ab.xlsx in the same location folder.And the same for 'cd', '01' and '02' by saving the data in files with name cd.xlsx, 01.xlsx so on.
View 3 Replies
View Related
Jul 2, 2008
i have a workbook that has several worksheets. i may create new worksheets at any time. i want to create a macro that will select a certain field of cells and copy it to a random spreadsheet of my choosing. i know how to make a macro that copies cells and pastes them to a different worksheet, i just want the macro to ask me which worksheet i want it to copy to.
View 9 Replies
View Related
Oct 18, 2013
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
View 6 Replies
View Related
Nov 2, 2009
I really appreciate help from the excel gurus and expert here on my little problem. I'm rarely using excel and have a very little knowledge on VBA programming.In short, I've been requested to develop a shift schedule for my department that can automate the shift staff schedule on the monthly basis.
I've created two worksheet of which the first worksheet is represent as master data list (INPUT Worksheet) that contain with formulas. While the other worksheet is the automated shift data (REPORT Worksheet) that linked from the master data list (INPUT Worksheet).
Attached herewith is a sample of my work. As you can see,I wanted to copy comments from the input worksheets (on DUTY column) so that it will then automatically appears or updated in the shift schedule. Whenever the dropdown selection change, the data will change accordingly. On the REPORT worksheet, each cells, range D14:AH38 are referring to DUTY column month by month. I'm able to link it but it fails to copy over the comments as well. I believe that macro can resolve this, can someone help me on this?
View 12 Replies
View Related
Dec 18, 2006
I have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster()
Dim wSheet As Worksheet
Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets
If UCase(wSheet.Name) <> "MASTER" Then
With wSheet
.Range("I1").Copy _
Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1)
'More Copy Method code here
End With
End If
Next wSheet
End Sub...
View 3 Replies
View Related
Dec 11, 2008
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Jan 31, 2014
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
View 1 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
May 21, 2014
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
View 3 Replies
View Related
