Copying Data In Macro
Jun 17, 2009I wrote the following code for sorting data in a column. but can't choose first 5% of the whole column and paste it in a separate sheet.
View 9 Replies
ADVERTISEMENT
Copying Data Via A Macro
Nov 20, 2008I have the following macro which copies data from one spreadsheet to another spreadsheet. The 2 files are specifically named in the database so they must have those specific file names in order for the macro to work.
Is there a way to set up this macro so that it automatically copies the data in the file that is active at the time (File1 in the attached code) to File2? File2 will always be the same file name, so that part of the macro is fine as it is. The active spreadsheet will always be the same format (so the Source Cells will work) but it may have a different file name each time.
Copying Data Into A New Row - Macro
Jun 11, 2009What I want to do is for a macro to run and for that macro to copy data and place it in a specific place. For example i want it to take the the 20 from "Village Headquarters (Level 20)". Another time when I run the script the 20 might be a 30. I there a way to do this? To define a place to take the data from within a cell.
My other question is, is there a way to have a macro automatically paste data one row down from the time it was run last?
Copying Data Macro
Feb 21, 2009I am creating an order form and after a user makes an order I want the data the be copied accross to another table (on the same sheet) - like an archive. I would like to create a macro that does the function. However, what I have thought of it that if I record a macro that cuts and pastes e.g. cells A2 and B2 to cells H2 and I2, the first time an order comes through it will be fine however, if the macro is run again it will keep over-writing the existing data in the archive section.
So, is it possible to construct a macro that will copy accross the data but each time it is run won't over-write what is in the cells. Like using an IF statement in the macro (if cells H2 contains data, then move to next avalible cell).
Copying Data To Another Sheet If Data Exists (using MACRO)
Jan 21, 2013I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies View RelatedMacro To Keep Copying Cells Until There Is No More Data?
May 26, 2014I have a spread sheet where you fill in an order, so customer name, item being purchased, quantity and price. I now need a macro that will copy that info over into an invoice.
If the customer is only buying one item, that would be straight forward, as it could just copy that info across, but if the customer buys two items, the macro needs to see that there is more data to copy, then insert a new row on the invoice and copy the details of the other item.
Macro For Copying Data Into A New Cell Each Day
Jan 8, 200912/23/20081/2/20091/5/20091/6/20091/7/2009Stores TotalTMX TotalTotal TMX Expedite
I'm trying to create some code that will do this:
On Day1- Copy info from a different worksheet in the 3 cells for 12/23 (column B)
On Day2 - Copy info from the worksheet in the 3 cells for 1/2 (col C) without deleting the info in Column B from the previous day, etc....
I can't figure out how to get it to paste into a different column each day. It will be continuously moving one column to the right each day.
Copying Data To Next Empty Row In A Macro
Jan 27, 2010I am trying to do is copy two ranges of data from one sheet and past the values to one other sheet. The trick is not having the data overwrite each time the macro is run (I need the data to be pasted to the next blank row). Also, as there are two ranges of data to be copied, I need to define which rows the paste is to start at e.g. copy data from sheet 1, Range("B8:M8") and paste to the next blank row on sheet 2 starting a cell "A3" AND copy data from sheet 1, Range("B9:M9") and paste to the next blank row on sheet 2 starting a cell "A20".
I've managed to get this far (see below) by pasting the data into two separate sheets but cannot work out how to modify the macro so the data can be pasted into a single sheet with conditions outlined above.
-----------------------------------------------------------------------
Sub Stats()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B8:M8").Copy
NextRow.PasteSpecial (xlValues)
Dim NextRow2 As Range
Set NextRow2 = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B9:M9").Copy
NextRow2.PasteSpecial (xlValues)
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
-----------------------------------------------------------------------
Macro - Copying Data From One Worksheet To Another
Jun 4, 2007I want to write an excel macro for copying the data from one excel sheet to another. The data should be copied as:
- It should sort the data on column E.
- Then it should sort the data on the column N.
- Copy the resulting rows in the ‘Result’ worksheet.
Macro Copying Row To Next Blank Row On Another Sheet With Data Validation?
Mar 19, 2013I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies View RelatedMacro For Copying And Duplicating Data Based On A Cell Values.
Aug 22, 2009I am trying to copy two cells from one worksheet to another in the same work book based on the value in Column B of one of the sheets. This is just a building block to a larger script I am going to create.
Below is my attempt but I keep getting an error at Range(Cells(x, 3)).Select.
Run-time Error '1004' :: Copying Data From Other Sheets By Macro
Feb 11, 2010I've been trying to use the below code,
Sub combine()
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application.GetOpenFilename(MultiSelect:=True)...
Macro For Opening Series Of Spreadsheets And Copying The Data - 1004 Error
Aug 20, 2014The macro (used to) go down the list of spreadsheets and copy certain data from them into this master workbook. Now I'm getting a "'C:Users310108841DesktopTestFolder' could not be found" error and don't know why.
[Code].....
The error appears to happen here:
[Code] ....
What's more infuriating is that this appears to happen at random. I have been trying all afternoon to get it to work, and had no luck. I have literally just run it now, and it works fine. I can't believe it just works at random.
Macro For Copying Rows Of Data In Sheet 1 To Sheet 2
Oct 8, 2009I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
Excel 2007 :: Copying Data And Graphs De-linking Source Data?
Dec 27, 2012I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
Excel 2007 / Windows 7.
Macro Copying
Aug 8, 2008My issue is that i have a excel spreasheet that contains macros. These macros work on my computer and our VPs computer. We have 4 other computers that were bought recently that have all the same operation systems as mine and the VPs, and save version of excel. I can not figure out why it wont work. Following is the code. I think what i have it narrowed down to is the rRange.copy. I dont think its copying on the 4 computers that it dont work on.
' this section prompts the user to select a range
Sheets("2008 drivers sch").Select
Dim rRange As Range
On Error Resume Next
Application.DisplayAlerts = False
Set rRange = Application.InputBox(Prompt:= _
Copying Range Of Data Into Another Master Workbook Below Existing Data
Mar 21, 2014I have a range of weekly data that I need to copy into another workbook, paste it below the data that already exists there and then delete the data from the original workbook. I would love to do this with vba but after hours of searching on how to do this my brain is frazzled.
I have 50 workbooks that I need to import weekly into one master sheet (Master.xlsm) but they need to be done individually after the weekly data has been checked. The master sheet will therefore have existing data and the new data needs to be appended at the bottom. Also column A will be blank in both workbooks so to find the last used row it will need to look in column B.
The number of rows in the weekly sheet will also vary rather than be a fixed range so I guess the last used row will also need to be found there too.
The attached file is a cut down version of my working file showing where the data starts on Row 14, I won't need to copy the headings.
Example file 21.03.xlsm‎
Copying And Pasting Data Scenarios Into A Data Report Sheet
May 31, 2006breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
Copying Data And Pasting Data To Update Database
Jun 3, 2006I have a workbook with a database of 15 different products. We receive information with current prices for each of the 15 products on a weekly basis. This info comes in one single worksheet. I have created a different file with one worksheet for each product to track price behavior over time. I need to update these database everytime I get a new report. What I was trying to do is to develop a Macro to copy the data from a "Master" worksheet that includes all 15 products info to the respective worksheet for each product. Information is sorted in columns having the most recent date in the lowest column. I would need the Macro to copy the new data below the last price for each product. I would copy the data into the "MAster" worksheet, then run the Macro who would copy each row and paste it in its respective worksheet in the row rightafter the previous one.
View 4 Replies View RelatedMacro For Row Copying From One Workbook To Another?
Mar 29, 2013#in order of priority
#1 So what I want to do is copy multiple rows from a table into another table, but only info from column a,b and c of that row into the other workbook's table. So I need to search for the number that is in E1 of workbook#1 and pull the rows that have that number from anywhere down column E of workbook#2. But I only want the info from cells a,b and c of the rows to transfer over.
#2 Also how to pull that off on all the sheets 1,2,3,4,5,6,7,8,9,10,11 and twelve of workbook#2's column E's into one list in workbook#1.
#3 How to put a button for the macro so if I change the value in E1 I can just hit it to repopulate the workbook#1 with a new list.
#4 How to pull from page 1-12 of workbook#2 but also a workbook#3 as well.
Copying Columns From One Tab To Another Via Macro
Dec 17, 2013I have 2 tabs (tab 1 is "Data", tab 2 is "Compare")
Data tab is filled with results from tests I do in a lab, each test has its own row, each 'test subject' has its own column.
In the second tab I want to have the ability to pick from a drop down list one of the other columns from the first tab.
So I have 2 columns (D and F) in tab 2 with drop down lists that I have populated with the names of the test subjects (using data validation grabbing the top row in tab 1).
I have formulas set up in Column E of tab 2 for the actual comparison.. What I'd like to do is when I select a test subject (for example SubjectA), from the drop down list in $D$1.. I want to populate $D$3:$D$155 with rows 3-155 of the matching column in tab 1 (so if for example SubjectA is in column X, it would copy from tab 1 X3:X155 to tab 2 D3:D155.
So so far I have the validation part done with the drop down list.. and I have the following VB code for tab 2.
Copying Cells With A Macro
Oct 10, 2009I would like to copy a range of cells with a marcro, for example copying range C3:C15 over to D3:D15 and when I run the macro again I want range D3:D15 to copy to E3:E15 and from there to copy E3:E15 to F3:F15. I want to keep that going to the next and the next with the same macro. But it just keeps copying the the original range which I recorded in the macro, but I want it to keep going. If somebody can help me with that, I would sure appreciate hearing from you.
View 8 Replies View RelatedCopying Between Worksheets With A Macro
Mar 20, 2013I have 2 worksheets. The first worksheet contaions raw data. On the second worksheet I am pasting certain data from the first worksheet. Everything copies except the data in column BI. This column has blanks as well as numbers. I need the column copied as is. The range should equal the number of entries in column A. Why am I getting the error, and Is there an easier way than what I'm using?
Sheets("Raw Data").Select
Range(Range("A4"), Range("A4").End(xlDown)).Select
Selection.Copy
[Code].....
Copying Macro To New Worksheet?
Mar 30, 2013Is there any code that can be written so when a person selects a tab to be moved to a new workbook, the macro code in the existing workbook would be copied to the new sheet? I'd also like to use a button that the user could click on for the macro.
View 3 Replies View RelatedCopying And Pasting In Macro?
Jun 6, 2013I am creating a macro for a monthly report of inventory. When I filter out items and the copy and paste them to another sheet, how do I tell the macro to paste it in the next available cell rather than say A20? Because the report has a different number of items and filter results from month to month.
View 3 Replies View RelatedMacro Called For Copying
Feb 23, 2007I have a macro called "Copying" and this runs perfectly well when run on its' own.
I have now created the following peice of
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Sheets("form").Range("B14").Value x Then
x = Sheets("form").Range("B14").Value
End If
Application.Run "Copying"
End Sub
Which (should) run the "Copying" macro if cell B14 is changed........here is my problem.
It seems to run this macro over and over again. How can I get it to just run it once?
Macro For Copying Files ..?
May 14, 2007I have data in several files named APT1, APT2, APT3, APT4, APT5... then I have a master file called APTMASTER. the fles contain certain data in sheet 1, what I need to know is if there is a macro that can copy data from all the APT 1 to APT 5 in the APTMASTER in such a way that it is one continous flow of data. Can this be done by just a button...
View 9 Replies View RelatedCell Copying Macro
Jun 18, 2005I need to able to copy certain parts of cells and paste it somewhere else. The data within the cell is presented like this City A/City B/City C. With an '/' seperating each. How can I copy just one part of that string using a macro(city a), and then keep track of it so that the next time I use a macro on that cell it copies the next part of the string(city b). I'll always copy the first City first so deleting it after it is a copied is an option but I dont even know how to do that.
View 6 Replies View RelatedExcel Macro For Copying Row Onto Another Tab If Cell Has Certain Value?
Jun 27, 2014I am trying to write a macro to do the following. I have data validation list in column G which will come back as either "Closed" "Pending" or "Completed". What I want to happen is when anyone changes a value in that column to "Closed" or "Completed" I want to cut the entire row (Columns A-G) and paste those rows on the "archive" tab which exists in the same worksheet. Then on the main sheet, I then need excel to shift the contents of the row beneath the row that was just cut up to fill in the blank row.
View 4 Replies View Related
