Macro For Copying Data Into A New Cell Each Day
Jan 8, 2009
12/23/20081/2/20091/5/20091/6/20091/7/2009Stores TotalTMX TotalTotal TMX Expedite
I'm trying to create some code that will do this:
On Day1- Copy info from a different worksheet in the 3 cells for 12/23 (column B)
On Day2 - Copy info from the worksheet in the 3 cells for 1/2 (col C) without deleting the info in Column B from the previous day, etc....
I can't figure out how to get it to paste into a different column each day. It will be continuously moving one column to the right each day.
View 9 Replies
ADVERTISEMENT
Aug 22, 2009
I am trying to copy two cells from one worksheet to another in the same work book based on the value in Column B of one of the sheets. This is just a building block to a larger script I am going to create.
Below is my attempt but I keep getting an error at Range(Cells(x, 3)).Select.
View 7 Replies
View Related
Nov 20, 2008
I have the following macro which copies data from one spreadsheet to another spreadsheet. The 2 files are specifically named in the database so they must have those specific file names in order for the macro to work.
Is there a way to set up this macro so that it automatically copies the data in the file that is active at the time (File1 in the attached code) to File2? File2 will always be the same file name, so that part of the macro is fine as it is. The active spreadsheet will always be the same format (so the Source Cells will work) but it may have a different file name each time.
View 2 Replies
View Related
Jun 11, 2009
What I want to do is for a macro to run and for that macro to copy data and place it in a specific place. For example i want it to take the the 20 from "Village Headquarters (Level 20)". Another time when I run the script the 20 might be a 30. I there a way to do this? To define a place to take the data from within a cell.
My other question is, is there a way to have a macro automatically paste data one row down from the time it was run last?
View 9 Replies
View Related
Jun 17, 2009
I wrote the following code for sorting data in a column. but can't choose first 5% of the whole column and paste it in a separate sheet.
View 9 Replies
View Related
Feb 21, 2009
I am creating an order form and after a user makes an order I want the data the be copied accross to another table (on the same sheet) - like an archive. I would like to create a macro that does the function. However, what I have thought of it that if I record a macro that cuts and pastes e.g. cells A2 and B2 to cells H2 and I2, the first time an order comes through it will be fine however, if the macro is run again it will keep over-writing the existing data in the archive section.
So, is it possible to construct a macro that will copy accross the data but each time it is run won't over-write what is in the cells. Like using an IF statement in the macro (if cells H2 contains data, then move to next avalible cell).
View 9 Replies
View Related
Jan 21, 2013
I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies
View Related
May 26, 2014
I have a spread sheet where you fill in an order, so customer name, item being purchased, quantity and price. I now need a macro that will copy that info over into an invoice.
If the customer is only buying one item, that would be straight forward, as it could just copy that info across, but if the customer buys two items, the macro needs to see that there is more data to copy, then insert a new row on the invoice and copy the details of the other item.
View 2 Replies
View Related
Jan 27, 2010
I am trying to do is copy two ranges of data from one sheet and past the values to one other sheet. The trick is not having the data overwrite each time the macro is run (I need the data to be pasted to the next blank row). Also, as there are two ranges of data to be copied, I need to define which rows the paste is to start at e.g. copy data from sheet 1, Range("B8:M8") and paste to the next blank row on sheet 2 starting a cell "A3" AND copy data from sheet 1, Range("B9:M9") and paste to the next blank row on sheet 2 starting a cell "A20".
I've managed to get this far (see below) by pasting the data into two separate sheets but cannot work out how to modify the macro so the data can be pasted into a single sheet with conditions outlined above.
-----------------------------------------------------------------------
Sub Stats()
Application.ScreenUpdating = False
Dim NextRow As Range
Set NextRow = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B8:M8").Copy
NextRow.PasteSpecial (xlValues)
Dim NextRow2 As Range
Set NextRow2 = Sheets("Past Stats Mar to Aug 2010").Cells(Cells.Rows.Count, 1).End(xlUp).Offset(1, 0)
Sheets("Current Stats Mar 10 to Aug 10").Range("B9:M9").Copy
NextRow2.PasteSpecial (xlValues)
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
-----------------------------------------------------------------------
View 9 Replies
View Related
Jun 4, 2007
I want to write an excel macro for copying the data from one excel sheet to another. The data should be copied as:
- It should sort the data on column E.
- Then it should sort the data on the column N.
- Copy the resulting rows in the ‘Result’ worksheet.
View 2 Replies
View Related
Feb 26, 2009
I'm trying to do is record a macro that will copy data from cells A1/A2 of Test.xls and paste it to cell A1/A2 of Text2.xls. Then when I run the macro again, it will copy B1/B2 of Test.xls to B1/B2 of Test2.xls, and then do that for the remaining cells.
View 9 Replies
View Related
Jun 18, 2005
I need to able to copy certain parts of cells and paste it somewhere else. The data within the cell is presented like this City A/City B/City C. With an '/' seperating each. How can I copy just one part of that string using a macro(city a), and then keep track of it so that the next time I use a macro on that cell it copies the next part of the string(city b). I'll always copy the first City first so deleting it after it is a copied is an option but I dont even know how to do that.
View 6 Replies
View Related
Mar 19, 2013
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies
View Related
Jun 27, 2014
I am trying to write a macro to do the following. I have data validation list in column G which will come back as either "Closed" "Pending" or "Completed". What I want to happen is when anyone changes a value in that column to "Closed" or "Completed" I want to cut the entire row (Columns A-G) and paste those rows on the "archive" tab which exists in the same worksheet. Then on the main sheet, I then need excel to shift the contents of the row beneath the row that was just cut up to fill in the blank row.
View 4 Replies
View Related
Aug 26, 2009
I am trying to write a macro to check a cell value is "Y" before selecting a range and copying to a second sheet, if the cell value is not "Y" I just want an error message.
This is the code I have so far but I have an error, the macro selects the row but does not paste on the second sheet, it does clear the range of data.
Range("L16").Select
Check_Value = "Y"
If ("L16") = "N" Then
MsgBox "Sort Completed Jobs First"
Else
Range("A16:P16").Select
Selection.Copy
Sheets("R2").Select
Range("A1").Select
Myvalue = IsEmpty(ActiveCell)
Do Until Myvalue = True
Myvalue = IsEmpty(ActiveCell)
If Myvalue = False Then ActiveCell.Offset(1, 0).Select
Loop
Selection.PasteSpecial Paste:=xlAll, Operation:=xlNone, SkipBlanks:=False _
, Transpose:=False
End If
View 9 Replies
View Related
Jun 20, 2014
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
View 4 Replies
View Related
Feb 11, 2010
I've been trying to use the below code,
Sub combine()
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application.GetOpenFilename(MultiSelect:=True)...
View 9 Replies
View Related
May 17, 2009
I need to be able to copy a formula from a row that is 180 rows before the current cell.
I then need to edit the formula so that the rows all start at 6. then i need to change the column references.
The formula that I am editing looks like this after it has been copied from before:
=IF('Entry Form Portrait'!$d870="m",IF('Entry Form Portrait'!$n870="a",'Entry Form Portrait'!$a870,""),"")
So I need d870 to be changed to d6, the n870 to be changed to o6 (current column +1), the a870 to be changed to a6.
Then this resultant formula to be copied to the next column and a6 changed to b6, then copied to next column again and b6 changed to f6.
Then all 3 columns to be copied (or autofilled) down 105 rows.
I tried to do it by recording the macro, however it only works for the first time that i use it, and then just keeps repeating in the same place. I need it to use the cell i have selected as the starting point.
View 9 Replies
View Related
Aug 20, 2014
The macro (used to) go down the list of spreadsheets and copy certain data from them into this master workbook. Now I'm getting a "'C:Users310108841DesktopTestFolder' could not be found" error and don't know why.
[Code].....
The error appears to happen here:
[Code] ....
What's more infuriating is that this appears to happen at random. I have been trying all afternoon to get it to work, and had no luck. I have literally just run it now, and it works fine. I can't believe it just works at random.
View 2 Replies
View Related
Jun 12, 2008
I have two columns of data in my worksheet.
Column-A Column-B
AAA 123-XXX-123
BBB 123-XXX-123
CCC 123-XXX-123
and so on
I would like to setup a marco to copy what is column A and replace XXX in column B. So the result as follow
Column-A Column-B
AAA 123-AAA-123
BBB 123-BBB-123
CCC 123-CCC-123
and so on
View 9 Replies
View Related
Jun 21, 2014
I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).
The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.
View 2 Replies
View Related
Dec 23, 2006
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
View 9 Replies
View Related
May 4, 2014
I had previously posted a query on deconstructing 2 set of tables (with similar heading)(in sheet 1 & 2) & combine them side by side with similar heading (in sheet3) so as to use condition formatting to highlight the differences & visually i can compare them easily.
1 group is 2 tables to compare. I have about 30 groups. So after creating the 1st group, i intended to use it as a template, without having to create the conditional formatting again & again. But after copying, the conditional formatting rules change. I am not sure why.
I attached a sample of my template for reference.
Sheet 1 - Table 1
Sheet 2 - Table 2 & part of Table 1
Sheet 3 - combine both Tables with similar column header side by side
in Table 3, cell B3 rules are "=C5<>B5"
SO the problem is when i copy data from Sheet 2, Table 2's Column Header B (cell f9 to f421) to Sheet 3, Column Header B2 (cell c5 onwards) the rules change to "=C5<>XFC5"
View 7 Replies
View Related
Jan 4, 2010
I have an Excel 2003 spreadsheet with multiple sheets - one main one with all data and others which have only the data that falls into certain criteria. I'm wondering if there's a way to enter the information on the main sheet and have it automatically populate the correct "sub-worksheet" depending on what is entered in a specific column.
I'm not describing this well but I've attached a sample of what I mean.
View 6 Replies
View Related
Oct 28, 2013
I have a piece of code that runs through various excel files and takes the data (minus the header) and pastes that into a separate workbook. The piece of code that does the actual copying i think is this (i have used code from the msdn website)
Code:
With sourceRange
Set destrange = destrange. _
Resize(.Rows.Count, .Columns.Count)
End With
destrange.Value = sourceRange.Value
I have tried replacing the sourceRange.Value with sourceRange.Text however when i do that it will copy nothing any more.
View 2 Replies
View Related
Dec 2, 2013
I have a database with different categories assigned to employees. I wan't to do the following. I will use just as an example, I want to some how accomplish: If Cell A in worksheet 1 equals cell C in worksheet 2, then replace Cell L in worksheet 2 from cell b in worksheet 1. Basically we have a database with phone numbers with corresponding purchase codes for each phone number and their names. The problem is, all the purchase codes are incorrect on the spreadsheet. We have an updated spreadsheet with just phone numbers and no names. I need to somehow pull the proper purchase code from one worksheet to the old document replacing the old purchase codes.
View 2 Replies
View Related
Jun 22, 2014
I am trying to use VBA to move data from one column to another while using values of a third column as a reference for where each value in the first column should be moved to in the second. I will try to explain as best as possible, currently I have a macro that copies from one column to the required but due to the irregular spacing of the data it results in the data not matching with the data its being copied into.
Say I have Three columns A, B and C. I have a range of data in column A say dates that have irregular amounts of spacing between them. Column B is empty. Column C contains Data that is again spaced out irregularly and not in line with that of A. The value of column C cells is just identical values. Now the aim is to move the values from column A in the order which they are listed and place them in Column B next to each value in Column C. So say the repeated value in column c is EXAMPLE then everytime EXAMPLE appears in column C i want to move one date from column A into column B next to this EXAMPLE value, in order which it appears in column A. So the first date will move next to the first EXAMPLE value and the second date which appears next to the second EXAMPLE and so on and so on until it reaches the end of the sheet.
My thinking was placing the A column data in an array and doing some sort of sort.
View 3 Replies
View Related
Aug 14, 2009
On sheet "Create Package" in cell "AA14" I have a value (lets say 2).
I want it to go to sheet "Samples" and insert a number of rows equal to the value on sheet "Create Package" cell "AA14" (so 2 rows)
I have a header row in row 1, so I would like it to insert the designated number of rows beneath that.
Then I would like it to copy a designated number of rows (based off of the "AA14" value, so 2) from the "Create Package" sheet starting at row 66 and then paste special values into the new rows that were inserted on sheet "samples".
View 9 Replies
View Related
Dec 2, 2009
I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.
I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.
My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.
View 2 Replies
View Related
Feb 9, 2014
I am trying to do the following with VBA.
What i need is to find out the last cell with data and then selecting the whole range and copying it.
Please see the below.
As you can see, the column with the "longest" data range is B9,C9,D9,E9.
I need a VBA code to detect which Column has the longest Data and from there copy the entire range.
Hence, in this case, the range to be copied is From A2:J9.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
ttt
rrr
m
vvv
gg
ff
fff
fff
fff
[Code] ..........
Hence,in this case, the range to be copied is From A2 to J14.
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
1
2
hjhjh
ghj
gh
ghj
ghj
ghj
[Code] ..........
View 5 Replies
View Related
