I have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 RepliesI am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies View RelatedI'm trying to add up some values based on a criteria in another column. I have numbers in column A ranging from 0 - 100 and in column B have totals for those numbers. What i am trying to do is Add up the totals in column B based on the following criteria's in Column A.
<7, >7 & <=30, >30 & <=60, >60.
I have a summary page to display the individual results in separate cells.
how to put together a function that will provide for me 1 of 3 results, ( lower than, higher than or similar to). What I would like to do is have a function to have the results for column B, be either "lower than", "higher than" or "similar to" based on column A. Column A will have a range of %'s from -100% to 100%. What I would like happen is the following results for cloumn B, based on column A. If Column A is:
Between -5% and 5% - Then cloumn B = "similar to"
>5% - Then cloumn B = "higher than"
>-5% - Then cloumn B = "lower than"
i modify the result but the problem is that when i try it the result alway have a higher number i cannot have a low number...
i want to have the reult from 1 to 1899
here is the
Private Sub CommandButton1_Click()
Randomize
TextBox1.Value = Int(Rnd * 1)
TextBox2.Value = Int(Rnd * 9) + 1
TextBox3.Value = Int(Rnd * 9) + 1
TextBox4.Value = Int(Rnd * 9) + 1
End Sub
Private Sub TextBox1_Change()
End Sub
Private Sub TextBox2_Change()
End Sub
Private Sub TextBox3_Change()
End Sub
In the attached excel file in column C, beginning on row 4, are numbers. These numbers will automatically update on my bloomberg terminal.
(1) I would like to then in column E to have a rating given to those numbers based on the below scale. The way the scale works is that if its 0.6 its a 10. If its anything slightly above 0.6 exactly, its a 9. A 10 is also a 0.5 and any number in between 0.5 and 0.6. The scale is below.
(2) Given that the formula that is being updated is a bloomberg excel formula (in the attached document I pasted it as values), will an excel formula be able to read the updated number in the bloomberg formula? If not, in column D is there a way to have it automatically paste D as values (and update each time column C changes or workbook is saved), and then have column E read off of those numbers.
Scale:
10 = 0.5 to 0.6
9 = 0.6 to 0.7
8 = 0.7 to 0.8
7= 0.8 to 0.9
6 = 0.9 to 1.0
5= 1.0 to 1.1
4= 1.1 to 1.2
3= 1.2 to 1.3
2= 1.3 to 1.4
1= 1.4 to 1.5
0 = anything greater than 1.5
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
I require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?
I have these two very simple vba commands that I need to combine
Range("A6", Selection.End(xlDown)).Select
Range("A4").FormulaR1C1 = "=COUNT(the range defined above)"
in order to count the numbers within the selected range
I have a spreadsheet that has a colum which has a duration column which is counted in Minutes, i am trying to do a formula that would look at this col and count up instances, egc =>5 but =<10, then >10 but =<20 and so on, I have tried and failed misserably trying CountIf and SumIf.
View 4 Replies View RelatedI'm having trouble getting Excel to count how many times each 'Colour' appears in each lottery draw. I've searched the previous questions and I think I'm nearly there, however I still can't quite get it right. I've added a small example to show what I mean.
View 9 Replies View RelatedI want to ask that I have got a workbook with different number series i want user form where i can enter its start number and end number and then it finds and delete shift cells up said series number i have entered in user form please see mentioned below example.
Series
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
and i want to delete 1 to 5 numbers delete to shift cells up.
I'm trying to count the number of numbers within a given range.
Example Row Y has cells that contain a series of numbers 1,5,9,12,23. No cell in the range should have the same individual number more than once. At the end of row Y I want to know how many numbers, not the total of the numbers are within that range.
Y
1 1,3,5
2 21,32,44
3 12,19,31
..
40 2,4,18
41 total number of numbers in range Y1:Y40 - 12
I need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
I recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer
Dim ltcol As Integer
Dim lastrowno As Integer
Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
ActiveChart.SetSourceData Source:= Sheets("PLOTS").Range("AN27:AQ33"), PlotBy _
:=xlColumns
How do I replace/modify the ("AN27:AQ33") in the code above using the variable integers; firstrowno, ltcol, lastrowno and rtcol ?
I'm working on spreadsheet where I have to match the data on two columns, and then count how many times that same number appears on both columns (see below table) In this below sample, I should get total of 3. (23654 , 12345 and 57963).
A
B
12345
23654
67891
12345
57963
11111
23654
57963
56954
77777
I have one Row that houses numbers 80-90 in seperate cells (11 columns A20:
K20) - these are my Numeric Labels.
I then have several other Rows that span the same number of columns as the
Numeric Labels (A21:K100) and house Numeric Values that relate to the Numeric
Labels.
I would like to AVERAGE the Numeric Values in each Row and have a Numeric
Label (value) that corresponds to the calculated average returned as the
result.
Example: Sample Data
A20:K20 (Numeric Label) 80 81 82 83 84 85 86 87 88 89 90
A21:K21 (Numeric Value) 07 06 05 03 09 09 00 02 04 12 10
Based on the above data - the Expected Result is 81
Average = 6; Return Numeric Label = 81
The leading zeros shown in A21:K21 is for alignment purposes only.
I would appreciate two formulas:
1) Includes zeros to be averaged
2) Excludes zeros from being averaged
I have tried variations on this =INDEX($A$20:$KJ$20,MATCH(AVERAGE($A21:$K21),
$A21:$K21,0)) but receive the #N/A error message.
I have a long list of numbers (1 to around 3000) in Column A and I need to print out only the numbers missing from that list. The numbers are sequential (except the ones missing) and there are no blank or missing cells, only missing numbers.
EXAMPLE:
1
2
4
5
7
.....
So I would only need to print the number 3 and 6. - it can be all in one cell, or in one column, it doesnt matter.
In my spreadsheet, each row of data in Column B starts with 3 numerics (e.g. 001) followed by some text. For example:
Cell B2 contains '001 - Text for this cell'
Cell B3 contains '002 - Different Text for this cell',
Cell B4 contains '003 - Different Text for this cell', etc.
I have hundreds of rows which follow this format.
I have had to insert several rows in my spreadsheet in between existing rows which has thrown off the numbering in the first three positions of my Column B cells.
Is there any way to update the data in Column B so the text data in each cell is retained but the first 3 numeric values are updated and again sequential?
I know different variations of this question get asked all the time... but I can't find an answer that I'm sure will *always* do what I want.
I have a range of cells (A1:A10), and I want to count all the text entries of positive length. That is to say, I don't want to count:
blanks
numbers
zeros
spaces
errors
I'm sure I need to use the LEN function, but I can't quite figure out how.
this counting expression will be inserted in a SUMPRODUCT formula
Can anyone help me to get a validation to check that what is entered in a cell, lets say A1,
has to be number between 100000 and 899999 (this I already have) OR a value/text from I100000 to I899999. So it only acceots a vlaue betwwen 100000 and 899999 and it is also ok to have the letter I at the begining.
I am using this formula: =INDEX(A5:Z5,MATCH(9.99999999999999E+307,A5:Z5)).
All the cells in the range A5:Z5 contain SUM formulas for adjoining cells in rows 1 to 4. The above INDEX formula doesn't work in this situation because many of the formulas in row 5 return a 0 value because there is no data in rows 1 to 4. If I delete the formula from all these cells, the INDEX function works OK, but I'd rather not do this.
Is it possible to amend this formula so that it returns that last numeric value >0?
I have been looking for code samples using Find to search for values within or outside a given value range. I haven't come across any that are obvious to me so is it possible?
I am using a piece of code that jindon here on Ozgrid has so kindly been helping me with. The code below searches for a certain value and returns that value when found along with other values. I am trying to adapt this same code to work on other searches I perform.
An example I am looking at is finding any values in column "K" which are either less than 700 or greater than 1300. How would I alter this code to perform a search like that?
Option Explicit
Sub test7()
Dim r As Range, ff As String, txt As String
With Sheets("Sheet1")
Set r = .Columns("av").Find("D00025", , xlValues, xlWhole)
If Not r Is Nothing Then
ff = r.Address
Do
I have the data as follows in each cell a number:
1 5 6 23 45 2
6 23 45 5 1 22
9 10 11 1 36 5
I have this kind of data going down about 2000 rows. I want to find how many times 1 and 5 appear in each row until there is no more data to read. I found the formula below but I cant use it for 2000 lines plus any extra that will appear in the future...
I am trying to write a macro in excel to clear all cells within a range that are non numeric. I seem to be going round in circles trying to find out how to do this.
I assume I have to use the IsNotNumeric(Target) argument but I can't find how to specify the target within a range.
If I have the following cells and values
A1 = 0
A2 = 0
A3 = ""
A4 = 0
I want a vba if statement that makes A5 = "Numeric.
If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0
I want A5 to = "Non Numeric"
Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""
I want a5 to = "Non Numeric"
Is there a way to do this without looping through each cell in the range?
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedI have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?