See attached spreadsheet. I am trying to create one formula that will take the product of numbers in column B based on criteria in column A (want the product of %s in each year). Product if formula.xlsx
View 7 RepliesI am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedI'm trying to do:
Column A is full of daily consecutive dates, Columns B to H are full of numbers.
I'd like to create function that accepts 2 dates and a column reference as input like this:
function(date1, date2, columnnumber)
And as output it gives the product of all the numbers in that referenced column between the two dates.
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
View 9 Replies View RelatedI have a table that has:
in column a an number 1,2,3,4,5,6
in column b I have a code against each number
in column e I have numbers , 1,1,1,1,1,2,2,2,2,3,3,3,4,4,4 etc ....
What I would like to have is the code from column c replicates in column d that's matches the code from column c
I have attached a sample of what I need : Product Detail - Copy.xls‎
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
I would like to have a Macro to go from the first tab called "Start" and end up with the second tab "End" automatically. BAsically I need to take the product on each line under Tab Start and reproduce it for sizes 35-41 always ending with "-(size)". Then this new Product with Size needs to be multiplied one below the other for as many times as I have pictures (number shown under column B of the tab Start). Next to this value in column B of tab End I'd like the same name listed again but with the number 1, then 2, then 3, etc. as needed and the extension .jpg.
View 4 Replies View RelatedI have a Sumproduct formula that should be resulting in 0. However, it is resulting in a very small number. I have 2 columns of data. The first one contains -169.5, -123.4, -34, -67.4, 169.5, 123.4, 34, and 67.4. The second column contains all 1's. When I create the following formula, =SUMPRODUCT(H27:H35,J27:J35), it results in 5.68434E-14.
Sometimes, when I have different numbers in the first column, but it still adds up to 0, the Sumproduct works.
What I need to do is count the number of cases and values of everything written between the first of January and today (242).
I know how to do it by counting the days from the 1st of Jan to today but how can I do it so it automatically updates each day.
This is what I have at the moment.
The product name is in K, the date is in H and the value is in M. The range is from cell 7 to cell 94
=SUMPRODUCT(--($K$7:$K$94="Pension"),--($H$7:$H$94<=TODAY()),--($H$7:$H$94>=TODAY()-242),$M$7:$M$94)
The following formula takes a census of people in our area by date and by hour (sample data attached): =SUMPRODUCT(--(FLOOR(Data!$B$4:$B$39,1/24)<=$B2+C$1)*(Data!$C$4:$C$39>=$B2+C$1))
The formula works great, but I would like to add another component whereby the census will only count someone if they have a certain description (see column A - with color descriptions). So how can I setup the formula, to say, only look at the "red" colors during the same specified dates/times and give me the same type of census...instead of looking at all of the data or creating 50 different ranges for all the colors?
I'm trying to do what I think its a simple formula with Excel 03 but can't get it to work. The info is in two work sheets - A&B.
[code]WORKSHEET A WORKSHEET B
A COLUMN 1 COLUMN 2 COLUMN 3 COLUMN1 COLUMN 2
B BLANK BLANK 10 BLANK DATE:1/28/09
C NAME DATE WORKED 12 NAME
D Jones 1/2/09 13 Bell
E Smith 1/6/09 12 Smith
F Cox 1/28/09 12 Cox
G Cox 1/28/09 10 Collins
H Collins 1/28/09 11 Jones
In worksheet B, Column 2, I need to pull the SUM of COLUMN 3 IF THE NAMES IN BOTH MATCH AND THE DATES MATCH
I've spent hours tyring to get this thing done!
I am stumped on coming up with a dynamic formula that calculates a value based on an increasing number of "sums of products". Specifically, I need to calculate the total number of repeat users based on a "decaying' repeat rate. In other words, I need it to calculate = Sum[... +(d5*f5)+(d4*g4)+(d3*h3)]
or in equation form:
where
n = (1, "infinity")
and
i = {1, 2, ... (n-1)}
with
"Xn" is the calculated value of repeat users for month "n" (output/result cell)
"mi" is the number of new users (in month i)
"Nn-i" is the column 'number' of the repeat rate value (%) multiplier
Here is a screenshot of the first couple rows to illustrate:
I actually have about 70 months of data (rows) and roughly the same amount of columns representing a decaying repeat rate (70 or so) and these will be increasing as time goes on so I need this formula to be dynamic (i.e. - copy it down the column of (# of repeat users)
I am using Excel for Mac 2011.
I currently have a formula that totals a product between two dates, however I need to add up a reason code for that product also in a different tab. My current formula is
=SUMPRODUCT(--('Product'!$A$2:$A$1069=B6), --('Product'!$B$2:$B$1069=Data!$A$1))
I want to add another section so that it looks at the dates between C6 & B6 and also the product in Data A1 but totals the reason from cell C10 in the data worksheet.
i need to look up a product based on the number and the qty. see the example attached.
On tab "Printer - S" 1 need to lokup the costs based on the product code 8 and the qty 100. How do i do this and make it adjustable for any range of priduct codes and qtys. Again, becuase this will be used on a Mac Office, i cannot use macros.
My problem is a little more complex than sumproduct.
I have a ratings column and exposure column. I want to weight those ratings before doing a sumproduct, at the same time ignoring #value.
In the attached file, I want to achieve the green cell in one go, based on the orange raw data.
Attached File : Weight Data.xlsx‎
How to solve my problem in attached file : Week Product Level Count.xlsx
View 1 Replies View RelatedBasically I have in the first column, different products (lets call them a, b,c and d). in the second column is a counter which starts at 1 and continues counting down the column.
In the third column I need to identify if it is the last time the product has been run. i.e there are no more duplicates of product a further down the 1st column.
I have attached an example : example.xlsm‎
I'm trying to get a cell {in the attached spreadsheet 'Order Form' Sheet- Cell 'B13'}, to bring up the corresponding product description {'Products' Sheet- Column C}. For the cell that is to bring up the product description {'Order Form' Sheet- Cell 'C13'}, the following is the formula I'm trying to use, but is coming up "#N/A":
=IF(C13>1000,VLOOKUP(A13,Products!$A$2:$D$12,3),IF(C13>287,VLOOKUP(A13,Products!$A$14:$D$25,3),IF(C1 3>0,VLOOKUP(A13,Products!$A$28:$D$38,3)," "))).
I haven't attempted the "Cost/Bottle" formula yet {'Order Form' Sheet- Cell 'D13'}, but it needs to correspond the product number {'Order Form' Sheet- Cell 'A13'} and the quantity ordered {'Order Form' Sheet- Cell 'C13'}, with the cost/bottle on the that quantity found on 'Products' Sheet, Column D.
In the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
View 2 Replies View RelatedIs there a simpler way to to the calculations on the spreedsheet i have attached?
Basically I want to count up the components used to make one product
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
following issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies View RelatedI have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
I have been asked if I can create a pseudo Lottery/Bingo card of 7 images with no repeat cards. The best i can tell is that I need to create a Permutation of the numbers 1 - 7. There should be 5040 combinations of unique possible cards. My problem being I don't know how to create this Permutation in Excel.
View 4 Replies View RelatedI would like to create a new products numbers column in Excel.
I have my supplier "SKU's numbers" in column A , I would like to create my "SKU's numbers" in XXXX format (only numbers) in column B.
Could someone help me pls todo it with Macro or if it possible todo it in formula ?
The code should check in the excel sheet, that it is not generate a new SKU that was used before !
Way to create order and quote numbers. I'm currently starting an order number with a "O" in front of the order number and a "Q" in front of the quote number but this presents a problem when trying to create the next consecutive number because the number has a letter at the start of it so I can't use the method plus 1. I'd just simply remove the "O" and "Q" from these numbers but I need the numbers to be unique from each other and putting the "O" or "Q" in front was the only thing I could come up with to avoid the numbers ever being identical. I often need to look up these numbers and return the values in that row so the numbers need to be unique from one another.
The information for quotes and orders is saved on separate workbooks but I'd still like the numbers to be unique from one another.
Having a letter at the start of each number or a work around for using the plus 1 method when you do have a letter at the start of the number?
I'm working with some diagnostic messages produced by a communications network, and trying to isolate a certain kind of message. There are many different types of messages contained in the error logs, and I need to look at different ones at different times. As a single log may contain thousands of messages, I'm trying to use VBA to grab the ones I want. The easy part is that these logs can be exported as CSV files.
Each message contains an identifier which I can use for finding the correct messages of a given type. (I'm only looking for one type at a time.) However, this identifier is not on the first line of the message; it's buried a few lines down, and the number of lines is variable. Additionally, the length of the message is variable. The good news is, all messages of interest start with the same text string, and all of them end with another consistent text string. It looks something like this:
Message Start
blah
blah
Message Type
blah
blah
Message End
(Where "blah" is useful information that varies, and the number of lines of blah varies.)
The Message Start string is constant across all message types, as is the Message End string, so I can't use them to find the correct Message Type. However, they are still useful for marking the start and end of each message.
I'm using the find function to find the correct message type, then another find (going up) to get the start of the message, and putting the row number into a variable (msgStartRow). Then I find again for the end of message (msgEndRow).
That all works just fine.
What I can't figure out is how to turn those message row numbers into a range that can then be copied and pasted onto a separate worksheet.
How can I use these variables to copy the correct range? For example, this is what I recorded manually, but it's not intelligent. It can't accommodate different message lengths:
Code:
ActiveCell.Offset(6, 0).Range("A1:A145").Select
Selection.Copy