Date Format: Extract Only Time And Paste It To Cell A56 In Same Sheet
May 6, 2006
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells): 2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758 2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698 2005/11/03 00:07:13.830 2005/11/03 00:10:14.971
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
I have a problem when i try to format a cell. i download data from a website and it gives me the date and time in the first column, ex. 1/1/2009 5:00:00 pm. when i format the cell to date, the time is erased and the date remains which is what i want, ex. 1/1/2009. however, when i click on that cell or any other in that column, the display above, or "insert function" line still show the contents of the cell with the date and the time, ex. 1/1/2009 5:00:00 pm. is there any way i can change that so the time is erased and only the date remains, ex. 1/1/2009 when i click on the cell?
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
I'm just wondering how you would go about extracting a date from a filename and formatting it into a different format so you can . Find with it. The file names are always in the same format with the same prefix. So each file is something like ABCDEFGyyyymmdd.xls. I'm really lost on where I should start with this one
creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
I am trying to use and if formula to see if the time on the cell was before a certain time.
The date is entered on Cell A2 - down and I would like to enter a formula in Cell B2 to say if the time on A2 is before 12pm as an example, "Complete" otherwise "Incomplete"
Example 1
Cell A2 : 01/10/2013 13:08:00
Cell B2 formula result: "Incomplete" (Because it was after 12pm)
Example 2
Cell A2 : 04/10/2013 10:05:00
Cell B2 formula result: "Complete" (Because it was before 12pm)
I have a column of times, that are actually dates of 1/0/1900 plus time, from which I want to extract the AM or PM status. I can format it to show this, but it's really just a fraction of a day. I need the actual text "AM" or "PM", not a decimal value.
i currently have a table/template in which external data is pasted... however there are 2 colums titles DATE and START TIME (amongst others) now although where the data is pasted from the information is in the correct format. After the information is pasted both the columns have exactly the same information in them. I'm pretty sertain the only reson for this is that the source the records/data actually comes from formats them on the screen differently to how the records are stored on the database using code....
so after the expanation which hopefully made sense is there any way i could convert a record like this
Thu Jun 28 21:54:33 GMT 2007 (this is how the information is pasted into the 2 columns)
to both
28/06/2007 for the DATE column and 21:54:33 for the START TIME column
the cell format makes no difference because the information is both text and numbers....
I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before Format - dd/mm/yyyy hh:mm Appearance - 29/03/2009 00:30
After Format - ddd dd/mm/yyyy hh:mm Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I found a formula for calculating time in the HH:MM AM/PM
=IF(B1<A1,B1+1,B1)-A1
This formula was to give me total hours in the cell for which it is entered, and cell format for the formula was in military format.
I cannot find this post. The formula worked in OpenOffice Calc program, but when it came to converting to excel, I came up with #value!
I want to enter the time in 12 hour format and using am/pm to designate. I am making it for someone to make work schedules with and they do not know military time.
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
Is it possible to have a macro copy a range of cells (A1:K1) and place it in the next empty row? My first row has formulas in it to grab information from a separate sheet within the same workbook with special formatting so I can import it to another program. What I want to be able to do is take that first row, use my macro button to copy and paste (only text, not the formulas) the information into row 2, then when the information changes in row 1 with new information (from the other sheet) it will copy and paste the new information into row 3 and so on.
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
