How To Extract Month From Date Which Is In Text Format
Nov 8, 2012
I have a column with the following values:
SubmitDate
November 8, 2012 1:37:07 PM GMT+05:30
November 8, 2012 9:32:03 AM GMT+05:30
November 8, 2012 4:32:54 AM GMT+05:30
November 7, 2012 10:28:11 PM GMT+05:30
November 7, 2012 8:36:43 PM GMT+05:30
November 7, 2012 6:33:13 AM GMT+05:30
[code]......
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
I have a date as 1/1/11 format in a date-formatted cell A1 for example. I want to extract the month in MM format, i.e. January, or "1" is extracted as "01", etc and just place it into A2.
So far, I've found an option to use format function in VBA and "MM", but I'm not familiar with VBA yet.
I have attached an example spreadsheet which should be relatively intuitive over me trying to explain it.
I am wanting to extract all CJ numbers with the corresponding dates from Sheet 1, into Sheet 2. It has to factor in, engineer name (as stated on sheet 2), the Month (as stated in sheet 2 "May") with the "Attended site" date in sheet 1....
If you see the worksheet it should give you the whole picture with a fair amount of clarity.
I need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.
I'm just wondering how you would go about extracting a date from a filename and formatting it into a different format so you can . Find with it. The file names are always in the same format with the same prefix. So each file is something like ABCDEFGyyyymmdd.xls. I'm really lost on where I should start with this one
I would like to convert date ranges (e.g. 01-01-2008..31-01-2008) to month name (e.g. JAN). Is there a way to do that? I tried the search engine, but could find a resolution there.
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
Any formula that can extract from a time stamp text string, which looks as follows: 7/8/2013 7:10:33 AM.
The tricky bit is saying anything before the first "/" represents the month, anything between the 1st and 2nd "/" represent the date, and the 4 digits after the second "/" represents the year.
In D2 I have: =B2 In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
I have a column of times, that are actually dates of 1/0/1900 plus time, from which I want to extract the AM or PM status. I can format it to show this, but it's really just a fraction of a day. I need the actual text "AM" or "PM", not a decimal value.
i currently have a table/template in which external data is pasted... however there are 2 colums titles DATE and START TIME (amongst others) now although where the data is pasted from the information is in the correct format. After the information is pasted both the columns have exactly the same information in them. I'm pretty sertain the only reson for this is that the source the records/data actually comes from formats them on the screen differently to how the records are stored on the database using code....
so after the expanation which hopefully made sense is there any way i could convert a record like this
Thu Jun 28 21:54:33 GMT 2007 (this is how the information is pasted into the 2 columns)
to both
28/06/2007 for the DATE column and 21:54:33 for the START TIME column
the cell format makes no difference because the information is both text and numbers....
I am trying to extract dates from text strings of varying lengths. The date may appear anywhere in the string. The dates are all 8 characters, in the mm/dd/yy format.
For example:
12/12/2007 is the date in this string. There is a date of 12/12/2007 in this string. The date in this string is 12/12/2007.
I've created a group of user forms used for recording jobs and displaying details of jobs and have come up against a problem I think you may be able to help me with.
When the user creates a new record, I've written some code to stamp txtdate text box with the current system date and this information is then copied onto a sheet called Data into a specific column.
This part works fine and as the column is formatted to handle dates it displays fine.
However, when I pull the data back in, it displays the date as the serial number date, not formatted as dd/mm/yy. I've tried every fix I can find to sort this but none of them seem to work.
The idea is that the user selects a job number from combobox1 and then the appropriate column is pulled into each txt box on the form.
At the same time, I'm trying to do the same for the system time as well. Unsurprisingly I have a very similar problem here and use the same code as above. I've tried formatting both date and time txt boxes in the userform, the data transfer code etc etc with no success.