DeletE All Rows In A Dataset
Mar 29, 2007
I am looking for a macro that is capable of deleting all rows in a dataset where the following statements are not true: column B is equal to "OP00" (o, p zero zero), the left hand character of C is equal to "L" and D is equal to "CC", as in the scenario below. I basically need to keep all rows which match the structure below, i.e. to clean the data.
B C D
OP00LKAOCC
OP00LMRPCC
OP00LVOFCC
OP00LVOFCC
OP00LVOFCC
OP00LVOFCC
View 9 Replies
ADVERTISEMENT
Dec 3, 2013
I have a large patient data set consisting of one column that includes their zip codes and one column that includes the number of times they were seen at a hospital over a period of time. I want to try to consolidate the data so I just have the number of total cases (for all patients) in a certain zip code over that time period. There are several thousand patients and it would be great to avoid doing it manually.
View 1 Replies
View Related
Feb 23, 2014
Rearrange dataset from columns to rows
However, the solutions do not work if "species " are text instead of numbers:
Parcel
Species1
Species2
Species3
[Code]...
View 4 Replies
View Related
Jun 15, 2013
I have attached two documents. One is called "Zone Destination" which is a template I designed. The other file is called "Schedule5_4" which gets downloaded from a work server once a week that contains all employees and their shifts for the entire week. What I am able to do so far is extracting the first row using index and match but I don't know how to extract any of the rows that follow. an employee might have several rows for one day based on a lunch or if they are working in multiple zones during their shift.
Zone Destination File -- start tab has the template in place that gets copied over when you create a new tab.
-- employeeroster tab contains the employee roster that i use to match with the schedule5_4 file. i changed the names and also reduced the amount to make it easier to read. i have over 80 employees but for this example, i only made up a handful.
schedule5_4 File -- this file contains all the data that I need to pull from. The criteria that I am using is by employee and date. I'm matching from the employee roster tab and also the date in cell a1 located in the zone destination file.
[URL]
View 5 Replies
View Related
Jan 17, 2014
I'm trying to count the number of rows in a dataset where column A is something, B is something, C is something, D is not something, D is not something else, and column E > 0 OR F is something but I just can't get the result I want.
My actual dataset is a staggering 294,000 rows and 46 columns so here's a simplified version:
View 8 Replies
View Related
Feb 28, 2014
I am having trouble finding an efficient way to expand a set of data that I have by adding another column to it.
Look at attachment : help.xlsx
I can do it manually but I have 5000+ rows of data that I need to selectively expand do accommodate the data from the new data set.
View 4 Replies
View Related
Jul 15, 2009
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
View 3 Replies
View Related
Sep 25, 2012
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies
View Related
Apr 16, 2014
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
View 5 Replies
View Related
Apr 3, 2014
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
View 14 Replies
View Related
May 22, 2008
Is there a limit on the number of rows and columns that can be deleted in a macro on Excel 2003? I am trying to create a macro that, amoung other things, delets 1119 rows and 54 columns. If I delete the columns first, the rows will not delete. If I delete the columns first, the rows will not delete.
View 12 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
View 4 Replies
View Related
May 10, 2012
I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
View 1 Replies
View Related
Sep 30, 2008
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
View 9 Replies
View Related
Aug 28, 2007
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
View 2 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
View 2 Replies
View Related
Jun 21, 2008
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies
View Related
Nov 5, 2006
Need to solve my problem in the thread "Type Mismatch Error Message". Now a new problem has come up in the same code, so - according to the rules - I've started a new thread. (This one is most likely due to my poor knowledge of VBA syntax).
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1 As Variant
Dim ar2 As Variant
Dim ar3 As Variant
Dim ar4 As Variant
Nr = 20
ar1 = Array(11, 14, 19, _
20, 22, 25, 26, 27, 28, 29, _
30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, _ .................
View 2 Replies
View Related
Mar 5, 2008
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
View 9 Replies
View Related
Jun 20, 2008
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
View 2 Replies
View Related
May 9, 2014
I would like to write a macro button, in order to lookup through col. "D" and where find same invoice number (invoice number combine with 3 letters plus dash), should sum the corresponding rows' amounts in col."J" into one row and the other row should be deleted.
View 3 Replies
View Related
Jun 28, 2007
I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
View 6 Replies
View Related
Nov 17, 2007
I have a workbook where I import data from another workbook. This might get done several times a month. As I go through the imported data I delete rows not needed which gets place into another worksheet. What I need is when I import data again is a macro that the worksheet where my already deleted rows are and compairs them to the new data imported and if the first 13 columns of data matches it delest them off the imported sheet.
I found some code which I altered at [url]
and posted the same question but haven't got any response as of yet.
So the code that i go works but only if the row matches in the exact order on both sheets so e.g. (if row 1 on sheet1 matches row 1 on sheet2) it works but if (row1 on sheet1 matches row 3 on sheet2) it does not.
Here's the code I have so far.
Public Sub delOLD()
Dim i As Long
Dim iLastRow As Long
Dim ws As Worksheet, ws1 As Worksheet
Set ws = Sheets("Data") ' Imported Data
Set ws1 = Sheets("Old Records") ' Deleted Data
'ws1.Visible = xlSheetVisible
View 4 Replies
View Related
Dec 8, 2013
Trying to add a vlookup to a data set and cannot remember how to do.....
I have a table with State and Suburbs. I want to look at both these within another sheet to ensure the post code is correct......
In the attached I want to show in Sheet1 Column D the post code from Sheet2. As there may be suburbs with the same name within Sheet1 I need to ensure the correct Postcode for the suburb and the state.
(Checking manually entered data....)
Exceltest.xlsx
View 3 Replies
View Related
May 14, 2014
I have a grid that I need to lookup and return the project hours for each system from the data set. The grid has the projects listed in the rows and the systems listed across the columns. The data set has a list of each projects systems hours. I am having problems with the formula when the data set has multiple records (multiple systems) for each project. It seems very simple, but I just can't get my arms around it. Please see the attached for example.
View 7 Replies
View Related
Jan 6, 2014
I have a set of 5,800+ data points between 0 and 1 that I would like to multiply together. When I use PRODUCT for the whole set, the formula returns 0. However, I can use a smaller subset of the data to return a very small number. I'm curious if Excel has a closest-number-to-0 or number-of-cells-for-PRODUCT limitation. Is there another way to perform this calculation?
View 4 Replies
View Related
Dec 19, 2009
I was recently helped very much by the forum moderator and code from D_Rennie in a file to transpose about 25,000 rows into a few organized columns. The code worked very well. I have a slightly new twist on the problem. I have uploaded a different file with a different data structure in the columns but the same need for the data to be transposed to the columns under the same headings. This VBA worked very well before, but I can't seem to re-use it for this new dataset.
View 8 Replies
View Related
Feb 2, 2010
I have a spreadsheet which has general usage and summary data at the top for ease of use. Begining at Row 15 the data is a standard table which includes columns for the following.
Cust Name | Status | Loan Amt | etc.
I have created a macro to make it easier to add new data rows at the top of the data already in the file (this makes it easier to view with the newest data at the top). I would like to create a conditional sum of the data in "Loan Amt" if the value in "Status" ="Active". I had no problem achieving this with the conditional sum tool but the problem is that the range changes whenever a new row is added to the top of the list. Unfortunately the range in the conditional sum adjusts as the old data shifts down for the new row and the sum does not contain the new row data.
View 2 Replies
View Related
Feb 24, 2010
I have to do a search on a dataset (about 3000 entries) and part of the exercise is to look in some project titles if there is a country or other key words included.
I have look on the web and unable to find a formula that works. Basically what I want to do is to have a formula a looks in the column of titles for a list of keywords on another sheet in the same book.
View 4 Replies
View Related
Oct 22, 2013
a macro (that i will link to a control button) that will autofilter a data set. The problem i have is the macro i wrote below, It might not be the best looking macro in the world, but it would work for my purposes if i can get the part that does the autofiltering to be more dynamic. meaning, instead of a hard coding "Retail" in the macro, id like it to reference a cell so that the user can type whatever they want, then click the button and it will filter based on what they type in.
this is what i have
Sub Filter_Button()
With Sheet2
AutoFilterMode = False
Range("A6:M6").AutoFilter
Range("A6:M6").AutoFilter Field:=2, Criteria1:="Retail"
End With
End Sub
View 5 Replies
View Related
