Delete Row And Shift It Up If Value In Column
May 15, 2014How would write a macro that would delete a row and shift up if they have a value in Column A?
View 6 Replies
ADVERTISEMENT
Delete Cells And Shift Up
Nov 7, 2009I have data in cells A1:FM1326 I want to delete all of the cells that say FALSE and shift the remaining cells up.
View 5 Replies View RelatedDelete Cells, Shift Everything Else Below It Up
Feb 6, 2007I have a problem in making a delete function/sub and i'm applying it to a listbox in userform ... i'm trying to delete a row of data in the listbox which refers to cells (A12:D12) ... and at the same row (row=12), there are other data cells (E12:H12) ... after deleting the cells all other data below the deleted cells will shift up taking over the deleted cells ...
View 9 Replies View RelatedDelete Cell And Shift Left?
May 28, 2014I want vba code to do the changes
Search for "CAP_ACTV_LN_SEQ" keyword in column A of Sheet1 and when found go two rows down and do the following
Delete cell D128 and E128 ( if more than 1 rows then do the same for all rows till "selected" keyword detected below it eg C131 in this case ) and Shift cells in the right to two column left as shown in figure below -
Before
2.jpg
After
3.jpg
Sheet attached
Data.xlsm
This can happen by click of button in the sheet
Delete Range Of Cells And Shift Up
Jan 30, 2013I am trying to delete a group of four cells and have the remaining block shift up. My code is below and crashes on the red. What is the right code to get this to work?
Code:
Do
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = Range("G1").Value Then
Range(ActiveCell:ActiveCell.Resize(0, 3)).Delete Shift:=xlUp
Exit Do
End If
Loop
Delete Row Macro (shift Cells Up Then)
Jul 1, 2007I am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies View RelatedDelete Cells Shift Left
Mar 15, 2007I'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
When Protect The Sheet - Delete And Shift Up Disable
Aug 8, 2013I have a sheet,i want the users unable to select any cells,but a column is free to select an change and enter the inputs. I want to delete and shift up zero cells on that free column,but this property is disable when i protect the sheet.
How I protect other cells from selection and change,and enable delete and shift up for the column that not protected.
For example: I have the attachment file,every column is protected except column "H". I want a macro to when I clear content of any cell in this column,every cells shift up and every non zero cell put from row 1 to... and after them zero cells put.
Delete Empty Cells, And Shift Left
Oct 7, 2008I am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 Replies View RelatedCompare Dates In Rows - Delete Then Shift Up
Mar 14, 2012I am fitting 2 sets of data to match eachother. I want to have as much data as possible but only for the same dates of each dataset.
I have 4 coloumns.
Dataset 1: A is date B is data
Dataset 2: C is date D is data
I want to compare A vs B one row at a time. If they are not similar it should delete and shift up the values in A+B or C+D according to the lowest value (date) of A vs B.
Remember that if the macro just deleted and shifted up it should compare the same (undeleted) value against the new value that just shifted up in the other coloumn.
Using VBA And If Statements To Delete / Shift Up And Insert Cells
Sep 7, 2012I am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
Delete Empty Cells And Shift Remaining Left
Oct 7, 2008I am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedDelete And Shift Cells Based On Cell Values
May 23, 2007I have a spread sheet that has RX codes as field headers and ones or zeros as values. I want to find all cells which contain "0" and delete those cells while shifting the remaining cells left. The range of cells is aj1:dr17365 and the sheet name is "May 07 Rx HCCs"
View 8 Replies View RelatedIf Column Contains Data Then Insert A Blank Column And Shift Specific Column To The Right
Apr 22, 2009What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View RelatedLookup Wage Calculations (calculate Pay Per Shift Dependant On The Type Of Shift)
Dec 1, 2009I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
Calculate Pay For Shift Work With Different Rates Based On Shift Hours
Apr 11, 2008a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
Data To Shift On Column 2 After Reaching The Row Limit Of 65,536 In Column 1
Apr 12, 2007i am using the code posted by Reafidy on [html] http://www.ozgrid.com/forum/showthread.php?t=62708[/html] to create a list of all possible combinations. The only problem i have is that sometimes the total no. of combinations exceed the excel row limit of approx 65,536. once the row limit in column 1 exceeds 65k, the remaining combinations automatically shift on column 2 and then on 3 n so on.
View 6 Replies View RelatedShift Cells Up A Row To Align With Column Using VBA
Jan 13, 2012I need to shift all the cells in columns B, C, D, E & F up a row to align with the names in column A.
I have code to delete the empty rows.
Start:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1) 2 59038.753MARINA BELAIDI (MB2) 4 12325.55MARGARET CANT (MC6) 6 33002.25
Result Required:
Bank Holiday 1 on a Week End
ABCDEF1YASMIN AKHTAR (YA1)59038.752 3MARINA BELAIDI (MB2)12325.54 5MARGARET CANT (MC6)33002.25
If Cell In Column Empty Shift Row Right
Jul 23, 2013I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
Insert Column & Shift Left
Sep 14, 2007I wanna shift a particular column (lets say column A) to the left, so I do the following:
hojaFAC.Columns("A:A").Select
Selection.Insert Shift:=xlToLeft
hojaFAC is a worksheet
BUT I get the next error when I execute my macro :
RUNTIME ERROR 1004
Select method of range class failed
Why do I get runtime error nš 1004 all the time also for other reasons. I think itīs the only runtime error I ever jumped into. But If I ever get a runtime error It's allways number 1004.
Search Cell If Blank Delete Cell Shift Values Up
Oct 22, 2009The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies View RelatedDeleting Cells Won't Prompt To Shift Row Or Column Up / Down - Left Or Right
Feb 22, 2013I've attached the sheet I'm working with. I need to delete most of column F and shift the rows to the left, but when I delete the cells it doesn't give me a prompt to shift the row, it just deletes the entire column or individual row. I need them to shift, what can I do?
Attached File : Coordinators Test.xlsx
Cannot Shift Nonblank Cells Off The Worksheet When Inserting Row/column
Jul 12, 2006When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies View RelatedMacro To Search Column For Blank Cells & Shift Entire Row Right?
Nov 2, 2008I am trying to write a macro to do the following:
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
Macro To Search Column For Blank Cells & Shift Entire Row Right
Nov 2, 2008Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 2 Replies View RelatedDelete Cell And Shift Cell Up
Jan 22, 2007I have data in cells A1:A4. I want if cell A2 is deleted using the button delete, the cell will automatically shift up. Can a macro do this?
View 12 Replies View RelatedStart Shift And An End Shift
Nov 18, 2009I have a Start Shift and an End Shift time,
Start Shift = 2009/11/10 09:27:06 (GMT-6:0)
End Shift Time= 2009/11/10 15:13:03 (GMT-6:0)
eg. Total Time = 5.3 hrs
I would like to take if from this format, and calculate the total time difference. Sometimes the GMT codes may be -5:0 if that means anything. For the cell "Total Time" I only need it to have a decimal format.
Delete Multiple Columns By Column Name No Criteria Need, Just Delete Them
Jun 24, 2009I would like a macro to find the columns named "apple" and "peach" and delete them. These would always be in row 1 but would always be in different column letters which is why I want the macro to simply find these columns by their name and not by their column letter.
And yes, I do mean the entire column altogether, shifting entire columns to the left. Wipe it off the face of the earth
Set Of Column Data Move To Different Column And Delete Unwanted Column VBA
May 29, 2014I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
Find The Column Name Purple & Delete The Whole Column If There Are No Blank Cells
Mar 18, 2009I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.