Delete Cell And Shift Cell Up
Jan 22, 2007I have data in cells A1:A4. I want if cell A2 is deleted using the button delete, the cell will automatically shift up. Can a macro do this?
View 12 Replies
ADVERTISEMENT
Search Cell If Blank Delete Cell Shift Values Up
Oct 22, 2009The below code is what I have and it works but what I need is for it to loop until it doesn't delete anything. How can this be done?
View 2 Replies View RelatedDelete Cell And Shift Left?
May 28, 2014I want vba code to do the changes
Search for "CAP_ACTV_LN_SEQ" keyword in column A of Sheet1 and when found go two rows down and do the following
Delete cell D128 and E128 ( if more than 1 rows then do the same for all rows till "selected" keyword detected below it eg C131 in this case ) and Shift cells in the right to two column left as shown in figure below -
Before
2.jpg
After
3.jpg
Sheet attached
Data.xlsm
This can happen by click of button in the sheet
Delete And Shift Cells Based On Cell Values
May 23, 2007I have a spread sheet that has RX codes as field headers and ones or zeros as values. I want to find all cells which contain "0" and delete those cells while shifting the remaining cells left. The range of cells is aj1:dr17365 and the sheet name is "May 07 Rx HCCs"
View 8 Replies View RelatedHow To Shift A SUM Row Down When The Above Cell Is Filled
Aug 16, 2013I've attached a simple spread which gets across the main problem. i need the totals row (currently row 7) to drop down a cell each time the data base above has an extra row added to it its pretty much a cosmetic issue but it can be useful on hugely long spreads.
View 13 Replies View RelatedDelete Cells And Shift Up
Nov 7, 2009I have data in cells A1:FM1326 I want to delete all of the cells that say FALSE and shift the remaining cells up.
View 5 Replies View RelatedDelete Row And Shift It Up If Value In Column
May 15, 2014How would write a macro that would delete a row and shift up if they have a value in Column A?
View 6 Replies View RelatedDelete Cells, Shift Everything Else Below It Up
Feb 6, 2007I have a problem in making a delete function/sub and i'm applying it to a listbox in userform ... i'm trying to delete a row of data in the listbox which refers to cells (A12:D12) ... and at the same row (row=12), there are other data cells (E12:H12) ... after deleting the cells all other data below the deleted cells will shift up taking over the deleted cells ...
View 9 Replies View RelatedIf Cell In Column Empty Shift Row Right
Jul 23, 2013I need a macro which will manipulate my data like this:
If a blank cell is found in column C, then I'd like to have the contents of that row in column D shifted to the right.
Shift Cells Up If Cell Equal 0
Dec 27, 2008In the range A1:Y66, for every cell whose formula returns a 0, I want it to delete that cell and shift the cells up.
Here is the code I tried, but nothing happened:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column > 25 Then Exit Sub
If Target.Rows > 66 Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
If Target.Value = 0 Then Target.Delete Shift:=xlUp
End Sub
'shift Cells Right' Depending On Value Of Cell
Jan 4, 2010I need a macro that will "examine" the text of column B for every row checking to see if the text "Proper Text" is in the cell and if not, execute this code for that cell and then move on to perfrom the same until it finds an empty cell:
Selection.Insert Shift:=xlToRight
Range("B2085").Select
ActiveCell.FormulaR1C1 = "Click for detail image"
With ActiveCell.Characters(Start:=1, Length:=22).Font
.Name = "Arial"
.FontStyle = "Regular"
.Size = 10
.Strikethrough = False
.Superscript = False
.Subscript = False
.OutlineFont = False
.Shadow = False
.Underline = xlUnderlineStyleNone
.ColorIndex = xlAutomatic
Note that "B2085" above is the cell number that the script stops on to execute this code.
Delete Range Of Cells And Shift Up
Jan 30, 2013I am trying to delete a group of four cells and have the remaining block shift up. My code is below and crashes on the red. What is the right code to get this to work?
Code:
Do
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = Range("G1").Value Then
Range(ActiveCell:ActiveCell.Resize(0, 3)).Delete Shift:=xlUp
Exit Do
End If
Loop
Delete Row Macro (shift Cells Up Then)
Jul 1, 2007I am looking for a macro that can delete whole rows (shift cells up then). How i would like it to perform is if there is nothing in cell(s) B then delete the whole row?
View 9 Replies View RelatedDelete Cells Shift Left
Mar 15, 2007I'm trying to do is check each Row and move the last 3 Columns of data in each Row to the left so they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W). Columns A and B are temporary. Column A utilizes the formula "= COUNTA(B2:AG2)" to count the number of cells in the row that contain data. Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data in the active worksheet. Columns A and B will be deleted at the end of the Macro.
The GOAL (END RESULT) is for Columns A through W (and ONLY these Columns) to contain data (keeping in mind that Columns A and B will be deleted at the end). If some rows have Column W (and beyond) blank, then I want to MOVE data from Columns U & V over to V & W and then COPY data from Column T into the [currently] blank Column U.
I've been trying to get the Macro to start in the last row and, using CASE Statements, delete the proper range of cells and SHIFT LEFT as it counts backwards towards the first row. I'm not too sure this is the best approach and could really use some advice from the experts! I can provide a "test" file if necessary ... the test file I've been working with is approximately 6.5MB, but I can delete most of the 14,287 rows and still give a good representation of how the data varies.
Sub b_DeleteCellsShiftLeft()
' DeleteShiftLeft Macro
' Macro recorded 3/14/2007 by George Nicholaou
' Need to assign variable for current row (?)
' r=ROW()
' Columns A and B are temporary
' Column A utilizes the formula "=COUNTA(B2:AG2)" to count the number of cells in
' the row that contain data
' Column B utilizes the formula "=COUNTA(C:C)" to count the total rows of data
' in the active worksheet
' They will be deleted at the end of the Macro
' What I want the Macro to do from this point is:
' 1. Check each Row and move the last 3 Columns of data in each Row to the left so
' they fall under the headings NHA2, NHA1, and OEM PN (Columns U, V, and W)
' 2. The GOAL (END/RESULT) is for Columns A through W (and ONLY these Columns)
' to contain data (keep in mind, Columns A and B will be deleted at the end)
' 3. If some rows have Column W blank, then MOVE data from Columns U & V over to V & W............
How To Ensure Formula Will Not Change If Shift Cell Down
Mar 8, 2014I have the formula but it will always change when i shift my cell down
=MAX($G$21:G35)
When I shift my cell G21 down, it will change to below
=MAX($G$22:G35)
The problem is that I do not want the formula to change. How can I do it ?
Date And Time Based On Shift In Cell
Jan 8, 2009If I use =now() in a cell it will enter the current date and time. For shift workers, this does not work.
I'm tring to figure out a formula that will only change the date at 6:00am every day. This way a person working the night shift will not see a change in the date on his sheet at all, only the day worker.
When Protect The Sheet - Delete And Shift Up Disable
Aug 8, 2013I have a sheet,i want the users unable to select any cells,but a column is free to select an change and enter the inputs. I want to delete and shift up zero cells on that free column,but this property is disable when i protect the sheet.
How I protect other cells from selection and change,and enable delete and shift up for the column that not protected.
For example: I have the attachment file,every column is protected except column "H". I want a macro to when I clear content of any cell in this column,every cells shift up and every non zero cell put from row 1 to... and after them zero cells put.
Delete Empty Cells, And Shift Left
Oct 7, 2008I am trying to find a method for deleting empty cells in a range and shift cells left upon deletion automatically. I could do this manually, but with 3000 rows of data it could be a long task. I have attched a small spreadsheet to show what I am looking for.
View 5 Replies View RelatedCompare Dates In Rows - Delete Then Shift Up
Mar 14, 2012I am fitting 2 sets of data to match eachother. I want to have as much data as possible but only for the same dates of each dataset.
I have 4 coloumns.
Dataset 1: A is date B is data
Dataset 2: C is date D is data
I want to compare A vs B one row at a time. If they are not similar it should delete and shift up the values in A+B or C+D according to the lowest value (date) of A vs B.
Remember that if the macro just deleted and shifted up it should compare the same (undeleted) value against the new value that just shifted up in the other coloumn.
Using VBA And If Statements To Delete / Shift Up And Insert Cells
Sep 7, 2012I am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
Remove List Item And Cell Contents, Then Shift Up
Oct 28, 2009how to code the following?
I need to remove an item from a list, find its match in column "A", remove the matching cell and then shift the remainder of the column up to remove the empty cell.
If this helps, there are 5 different sheet names, and I'm working with range A4:Range("A" & Rows.Count).End(xlUp).Row for the items in the list.
To make it as simple as I can:
COLUMN A
one
two
three
four
user clicked on two in the list, so column A now looks like, with no gap between one and three:
COLUMN A
one
three
four
One sheet actually needs it to do the same removal to identical rows in column B as well (i.e. remove A10 and B10, or A45 and B45, etc.)
Delete Empty Cells And Shift Remaining Left
Oct 7, 2008I am looking for a method which would delete empty cells in a row, and then shift the remaining data to the left (filling the cells with data). I know that this could be done manually, but I need it completed for 3000 rows! I have attached a simple sheet to show what I'm Looking for.
View 2 Replies View RelatedMacro That If I Hold Control + Shift + A I Will Get A Pop Up Saying "Your Amount Is (value Of The Cell)
Nov 25, 2008I have an excel sheet and I want a Msg pop up to show a certain amount from a specific cell. So if the cell shows $100. I want to a do a macro that if I hold control + shift + a I will get a pop up saying "Your amount is (value of the cell).
I can only get it to work if I want the vale from an active cell.
MsgBox "The value in the active cell is " & ActiveCell.Value & "."
Operational Model - Shift Start Time Plus Amount Of Hours Worked In One Cell.
Feb 19, 2009Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that?
For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).
Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
Lookup Wage Calculations (calculate Pay Per Shift Dependant On The Type Of Shift)
Dec 1, 2009I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
Calculate Pay For Shift Work With Different Rates Based On Shift Hours
Apr 11, 2008a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
Excel 2010 :: Delete Cell Contents If Cell Contains Numerical Value?
Oct 8, 2013Recently I have been practising writing my own macros in VBA. I am using Excel 2010.
I have been trying to write a macro to look at two columns in a worksheet (say, columns D and E) and to delete the contents (not the formatting, and I don't want to delete the cell itself) of that cell only if it contains a numerical value (e.g. 1, 2, 256 or any other number). If it finds a cell with letters, then it wouldn't delete the contents of the cell. The cells are currently formatted as "currency" cells.
I have been trying all sorts of things and I just can't get it to work. I can write a macro to clear a range easy enough, but I am stuck on getting it to delete the right stuff. I won't embarrass myself by uploading the code that I have been using..
Macro To Find Match Delete It From The Cell Display It In Different Cell
Apr 23, 2008I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies View RelatedDelete Rows Where Cell Doesn't Equal Adjacent Cell
Aug 16, 2007I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedExcel 2010 :: How To Delete A Name From One Cell And Assign It To A Different Cell
Dec 10, 2013I have excel 2010. I have a worksheet with formulas that refer to a labelled cell, and I want to change the location that they refer to. When I select the name in the Name Box and delete it or type another name it has no effect on the name of the cell.
View 2 Replies View Related