Delete A Complete Row Based On Time Value In Cell
Dec 28, 2009
I have a spreadsheet with date and time values of the format
"dd/mm/yyyy hh:mm" in column A followed by some other data in cells of that row.
What I'd like to do is have a macro that will delete a complete row if the time value in column A lies between two times that I can specify in the macro (the dates are irrelvant)
View 8 Replies
ADVERTISEMENT
Jul 1, 2008
I would like to have excel automatically fill an excel cell with a predefined list. For example, if you put the letter l it will automatically include the word large. This is like you do when you fill out a form online. See attachment
View 2 Replies
View Related
Jun 5, 2012
What I am looking to do is find the time it has taking to complete a task - So the work sheet has four cells (See below) and return the total time with cell E
Cell A Cell B Cell C Cell D Cell E
June 5 10:00 AM June 6 12:30PM ????
View 2 Replies
View Related
Dec 6, 2006
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
View 9 Replies
View Related
May 22, 2014
Given:
6:21
3:04
2:29
0:48
These represent time it takes for a fax to send. I'm trying to find the average time it takes for these faxes to send. Using the built in @AVERAGE option does produce a number albeit an incorrect number. Wondered if I could convert these to decimal numbers then covert the result back to time - when trying that I don't get an average but rather a time of day - say 5:55:30PM.
View 2 Replies
View Related
Jul 11, 2012
I have VBA code that attempts to delete an entire row from my worksheet:
Code:
Cells(3,1).Select
Selection.EntireRow.Delete
This works fine on small data sets, but on larger data sets it gives me the error message, "Excel cannot complete this task with available resources". This happens even when I try to do the deletion manually (without VBA code). Clearly, the code itself is not the problem.
My document has about 250,000 rows and 2,500 columns. While this is big, it is significantly smaller than Excel's documented limit of 1,048,576 rows and 16,384 columns.
I am using Excel 2007. My computer has 2GB of RAM but even when I try it on a computer which has 8GB of RAM it gives me the same error. If I "ClearContents" instead of "Delete" it works fine. For my purposes, however, deletion is entirely necessary.
View 9 Replies
View Related
Jun 19, 2014
I'm doing a study of when people are most productful in their day. I just need to count how many units a person made within say 4 hours of starting work.
My data is similar to the excel I've attached
Count completes.xlsx
I'm using Excel 2010 too.
View 4 Replies
View Related
Nov 20, 2013
I have a sheet (example is attached) that lists multiple jobs and their related tasks. I want to know if it's possible to create a conditional formatting that says if the percentage complete under the "task" is under 100% and within X number of days of the target date, it's red/yellow/green.
So, if a target date is 70-100 days out; 0%-10% - RED, 11%-45% - YELLOW, 46%-100% - GREEN
If a target date is 40-69 days out; 0%-45% - RED, 46%-75% - YELLOW, 75%-100% - GREEN
If a target date is 20-40 days out; 0%-60% - RED, 61-90% - YELLOW, 91%-100% - GREEN
If a target date is 0-20 days out; 0%-85% - RED, 86%-95% - YELLOW, 96-100% - GREEN
If a target date has passed, Anything under 100% is RED.
View 4 Replies
View Related
Jan 7, 2008
Within a data validation selection, are you able to do both Auto Complete and Auto Delete? I have this posted at another forum [url]but have not been able to find a solution (a copy of the file, test. zip is there as well). I am not sure it is possible, or, at least I have been unable to get it working. I can do each, but not both.
I have also been utilizing:
[url]
[url]
View 5 Replies
View Related
Mar 27, 2014
What would the formula be to complete all three of these functions in one cell?
64
-3
61
When positive & negative then G1+T1=X
-8
-8
0
When negative & negative then G2-T2=X
3
2
1
When positive & positive then G3-T3=X
View 6 Replies
View Related
Apr 23, 2012
Whats the best way to get a complete list of the properties of a given cell?
Possibly this is documented somewhere if it's always the same, or maybe it varies and there's some sort of collection you can iterate through.
View 3 Replies
View Related
Apr 6, 2014
I am trying hard to use excel macro to round up cell value to next complete figure when it reaches to 0.6, however it should show the first five "0.1, 0.2, 0.3, 0.4, 0.5 exactly. I am giving increment of 0.1 digit to A1 Cell, it is going well. I am unable to get the next complete figure when 0.6 comes. Is it possible in macro.
View 3 Replies
View Related
Sep 24, 2007
I have a formula that calculates the number of rows in a spreadsheet. I would like the results of that formula to complete a range description. For instance, if the range would be expressed as A1:A20 (for a file with 20 rows), and the result of the formula (the cell enty) for a different file is 35, I would want the range to be expressed as A1:Ax, where x is equivalent to the result of the formula (effectively A1:A35, but expressed with a reference to the cell with "35" in it, not the 35 itself).
View 9 Replies
View Related
Dec 9, 2006
I have the attached spreadsheet set up using a vlookup funtion in D1. I need the macro to be able to find the actual row this number resides in and delete that row whenever E1 is equal to Delete.
View 5 Replies
View Related
Jun 22, 2007
I currently have a spreadsheet with circa 50,000 lines with info regarding our websites at work. In every row, column "A" contains a unique reference number.There eill either be 1 row for this reference number, or there will be 2 rows. there will never be more than 2 rows for each reference. I wanted some code to say that if theres only one row, then delete it but if the if the cell underneath it is the same then its ok. I tried the following but it deletes the row anyway, supposing the cell under it is the same or not
Sub test()
Dim icell
icell = ActiveCell.Offset(1, 0).Value
Range("A1").Select
Do
If ActiveCell.Value = icell Then
ActiveCell.Offset(2, 0).Select
Else
ActiveCell.Rows.Delete
End If
Loop Until ActiveCell.Value = ""
End Sub
View 4 Replies
View Related
Oct 19, 2007
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
View 2 Replies
View Related
Jun 1, 2007
I found this code for an auto-complete function from this website: [url]
It works well, but see the web example before using it. You have to name a range MyList with your potential values for it to work.
Currently, you have to click the drop-down arrows to see the potential entries. I want to make it so that after the user enters the first 3 characters it will automatically "drop-down" and show the potential entries. This will save a trip to the mouse and let the user see whether their entry is in the system.
Option Explicit
Dim i As Long
Sub KeyEventOn()
For i = 65 To 90
Application.OnKey "{" & i & "}", "'MyValidation """ & i & """'"
Next
End Sub
View 4 Replies
View Related
May 26, 2014
I need a code to delete all rows with "Complete" in Column D below Row 7.
View 2 Replies
View Related
Jun 22, 2012
I would like to search my worksheet and whenever it finds the word "Description" in column "B" then it should select the range "B:E" for that row and delete the cells directly above it.
This is what I tried but nothing happens:
lr = ActiveSheet.UsedRange.Rows.Count
For Z = lr To 1 Step -1
If ("B:" & Z) = "Description" Then GoTo deleteit
GoTo xt
deleteit:
z1 = Z - 1
Range("B:" & z1, "E:" & z1).Delete
xt:
Next
End Sub
View 1 Replies
View Related
Oct 22, 2012
I have this setup successfully for the deletion of columns and have modified the below to apply to rows, however, I am not seeing the results I expect (or actually anything).
Code:
Sub Analytic_RemoveNA()
'Remove NA
Dim j As Long
For j = 35 To 4 Step -1 'Rows 35 to 4
If Cells(9, j).Value = "NA" Then Rows(j).Delete
Next j
End Sub
I have a data set that spans from B4:I32. If column I has "NA" in any row within that dataset, I want to delete the row.
View 3 Replies
View Related
Oct 21, 2013
I have a spreadsheet broken out into about 30 4-row ranges, for example (A10:L13). All of the ranges use a using a vlookup argument:
=IFERROR(VLOOKUP($A10,Fund_Range,2,FALSE),"") in the second row.
Around 15 of the ranges will be populated based on varying data in the fund_range data table, the remainder will be blank. The first row of each range is a header row, I would like the macro to delete the range when there is no value in the second row (the blank ranges). Every attempt I have made starting with other code from the forum has come up empty. I think part of my problem is the vlookup formula existing in these otherwise "blank" rows.
View 2 Replies
View Related
Jul 6, 2014
I am looking to make a cell with the Value =Today()-1. I then want the code to pick up the cell value and then delete any row that does not have that value.
So for Example it would only keep =Today()-1 Dates in the sheet and delete the rest.
Code:
Dim LR As Long, i As LongWith Sheets("Sheet1")
LR = .Range("Q" & Rows.Count).End(xlUp).Row
For i = LR To 2 Step -1
If .Range("Q" & i).Value = "Y" Then .Rows(i).Delete
Next i
End With
View 9 Replies
View Related
May 4, 2006
I need a way to check to see if the first four characters of cell A1 is = 2006. If it is, do not delete the row, else, delete the row. Have tried everything I can think of.
View 5 Replies
View Related
Sep 7, 2008
If there is a time value founded in column G.
How can i add in value "1" into specified column H(1000hr-2200hr) or I(2200hr-1000hr) based on the 24hr-time format in column C ?
View 13 Replies
View Related
Nov 11, 2013
Can I retrieve, from VBA, the exact value of a cell?
If in A1 I write 0.12348 with general, number or text format, from vba with MsgBox ActiveSheet.Cells(1, 1) I obtain 0.12348.
If in A1 write 0.12348 with currency or accounting formats, from vba with MsgBox ActiveSheet.Cells(1, 1) I obtain 0.1235.
Naturally, I need retrieve complete values from cells with format accounting?
My Excel 2010!
View 2 Replies
View Related
Jan 25, 2008
is there any way to remove/deactivate the cell's auto complete year function?
eg: input the value "03-jan" and the cell will automatically convert the value of the cell to 03/01/2008
View 9 Replies
View Related
Feb 22, 2014
I have this sheet(sheet2) with some data , I have 2 macro, my problems at this time is that I am looking for macro that delete only the blank rows that under the rows with {SELECT ....} and the under the blank rows with {CELL-ENTER......} and all the rest blank leave in place , I am also looking for option to integrate the new macro with the existing one and come up with one macro that I can refer to click button , in case that it is unfeasible , it's ok with me , I just will call the other macro at the from the first macro that I have.
View 4 Replies
View Related
Jun 7, 2012
I have two listboxes where I can move tickers from left to right. This is synced with a sheet, such that the tickers also are pasted there too.
But if I use the remove button, I can remove tickers from the listbox, but I cannet delete them from the sheet. If I understand right the listbox only refer to what row the selected is, not what the text is...
And then its a bit tricky. I have tried a code where it just add the list one more time, after the itmes has been removed. And that could work if it hadn't been for the second column which also has a text, this column is updated after every ticker has been moved from left to right.
What I would like to have is a function that would know what the text in the row that I delete, or remove.
This is what I have so far:
Code:
Private Sub cmdMoveToLeft_Click()
Dim i As Integer, j As Integer, k As Integer
Dim RowsStart As Integer
Dim LastRow As Long
Dim Rows As Integer
RowsStart = Me.ListBoxX.ListCount
[Code] .......
View 4 Replies
View Related
Dec 13, 2013
I have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
View 2 Replies
View Related
Feb 14, 2008
I am using conditional formatting to apply a light green color (index number 35).
Is there a macro that can delete the cell contents of the cells with this formatting in col K and L?
View 9 Replies
View Related