I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies
iam trying to hightlite the textbox text after the error message.
Private Sub txtRoofWidth_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.txtRoofWidth.Value) Then MsgBox "Use numbers only", vbCritical, "RoofWidth"
With txtRoofWidth
.SelStart = 0
.SelLength = Len(txtRoofWidth)
End With
Frame23.Visible = False
End Sub
I need a program for my user form such that it displays an error message.
I have created an user form with employee name ,task and remarks.
I need a program in such a way if an user clicks the "submit" button without entering all the fields in the user form, an "error message" should be displayed.
The submit button has to work only if all the fields are filled by the user.
When the whole row in excelsheet is full for particular date that means all the values of columns (Legal Charge,GA and DNM) have been entered for particular date then display an error message if the another user tries to enter the values for the same date .
It means the user can enter the values for same date only if values of Legal Charge,GA and DNM are empty,otherwise an error message should pop up.
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
I have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingsDesktopCommercial Database"
.SearchSubFolders = True
.Filename = "*.*"
.TextOrProperty = "BANK"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
End If
End With
End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed.
Here is the code for those who may need it....
Every time I run it I get a Run Time Error Message 1004 when trying to custome sort on D4.
Rng2.Select
With Selection
.Validation.Delete
.Sort Key1:=Range("A4"), Order1:=xlAscending, Header:=xlYes
.Sort Key1:=Range("D4"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:="L,M,H,Contract", DataOption:=xlSortNormal
End With
I have an excel workbook with a form... Not I used this for and the code in other workbooks but this one just does not want to work.... I think the problem is somewhere in the code below but I can't point it out...
Private Sub UserForm_Initialize()
cboDocument.Value = ""
With cboDataType
.AddItem "Voluntary"
.AddItem "AIP"
.AddItem "CA Low Cost"
.AddItem "Takeout"
.AddItem "Terr Cr"
.AddItem "Vol Cr"
End With
For some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code:
If DateBox vbNullString And DateValue(DateBox) > checkdate Then
M1 = "NEOPRENE" & Chr(13)
Else
M1 = "" & Chr(13)
End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
I have used a process of elimination by disabling all VBA code and macros throughout this workbook systematically until I traced my problems to this code.
Private Sub Worksheet_Calculate()
Dim red1TargetCell As Range
Dim red1dblValue As Double
Set red1TargetCell = Sheets("1-A").Range("AC3")
red1dblValue = Val(red1TargetCell.Value)
Select Case red1dblValue
Case 1
Call Red1copypricelog
End Select
End Sub
This code is delivering an error message when the workbook is first opened that reads as follows:
Run-time error "13"
Type mismatch
I can answer "end" to the debug box that appears and the code runs as if there are no problems. I have this code applied to 7 different worksheets within the workbook with slightly altered variable names, so I have to click "end" seven times and then the workbook functions as if all is OK. One other note worthy point is when I have this workbook open, it locks up if I try to open any other excel files at the same time. I want to make sure all my code and macros within this workbook only work within this same workbook. I'm assuming that is why other workbooks are locking up. I may be way off here since my VBA programming is very limited.
I have the below code that loop through a list and hides rows that doesn't contain a value of the Textbox, it works fine but becomes very show where number of records it passed through the loop is greater than 1000, is there more efficient way of writing this code?
Number of cells to loop through is 10000 Max
PHP Code:
Private Sub tboxSearch_Change()
LastRow = Cells(rows.count,5).end(xlup).row
For Each cell In Range(Cells(55, 5), Cells(LastRow,5))
If InStr(UCase(cell.Value), UCase(tboxSearch.Value)) = 0 Then
Rows(cell.Row).EntireRow.Hidden = True
End If
Next cell
End Sub
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click()
Dim rownum As Integer
rownum = 2
'Prompt user with message box asking for input in both text boxes
If Me.txtNumber = vbNullString Then
response = MsgBox("Please enter a Work Number", vbInformation)
Me.txtNumber.SetFocus
Else
' Insert the work no., driver, locker, keys issued & keys On hand
ActiveCell = Me.txtNumber.Value
ActiveCell. Offset(0, 1) = Me.txtLocker.Value
ActiveCell.Offset(0, 2) = Me.txtIssued.Value
ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
As you look in the the attacht file you can see that there are rows in grey. But if i print it everything is black. We tried on a differend computer (even differend opperating system) and on mac it prints correct, but on my windows it doesn't? It is probable a setting but i can't find what it is..
View 1 Replies View RelatedUserform1 on the attached file has a "Calendar" button to display a calendar that allows the user to select a date and have it placed in the Date Text Box. It simply doesn't work unless you click on the userform area where the calendar should appear - but how would the user know that?
View 2 Replies View RelatedI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedIs it possible to place a prompt message regarding the time limit or return time when entered time is place on the worksheet? Like "Please be back at 8:30 AM" when the user click the Start time button at 8:00 AM.
View 10 Replies View Relatedin column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
I've written the following bit of code but the error handling doesn't work properly: ....
View 9 Replies View RelatedI run a macro to change many features on an excel sheet. I'm trying to include a command that searches for an excel sheet and if not found to skip over that command and proceed to search for the next sheet. If the second sheet is included, then to proceed in running the following code for that specific page.
1) Search if sheet is included
2) if no to sheet exisiting, then proceed to search for next sheet.
3) if yes to sheet existing, then run the code below.
and so on..........
Is it possible to format the message box display? I need to display currency format, how can this be done?
View 3 Replies View RelatedI want to sort the information that will be displayed in a message box just before it's displayed, is this possible. I can't do this in the worksheet because it would conflict with how I have the worksheet sorted already. Here's the last portion of the code that will display what I want in the message box. I want to sort by the... Requested on: " & mpNames.Cells(i, 2).Text & " this column has a date and time in it and I want the sort to use this information to sort the message box.
If .Cells(i, "A").Value = mpTestName Then
mpMessage = mpMessage & mpNames.Cells(i, 1).Value & _
" (Requested on: " & mpNames.Cells(i, 2).Text & ", Leave type: " & mpNames.Cells(i, 3).Value & _
", Start Date on: " & mpNames.Cells(i, 4).Text & ", End Date on: " & mpNames.Cells(i, 5).Text & ")" & vbNewLine & vbNewLine
End If
Next i
If mpMessage "" Then
MsgBox mpMessage, vbOKOnly + vbInformation
Else
MsgBox "Blah Blah Blah Blah Blah Blah Blah Blah", vbOKOnly + vbInformation
End If
End With
End Sub
When the user enters a date (A1), that date is cross-referenced with a database to determine 1 of 3 results, in which the results are displayed in A3 as follows - Date out of range. (value="DOR"), No records exist. (Value="NRE"), Records exist. (Value="RE").
Once the date is entered and the corresponding value determined, I would like to have a ppo-up message appear with options:
Date out of Range.
Message: "Date falls out of range of operating season. Please re-enter." ** I think I can use validation to take care of this. **
Message "Would you like to import data?"
Yes - open external application
No - default A1 to current date and await user input
Records Exist.
Message " x Diamond Records; y Field Records; z Court Records " where x y z are numeric values based on lookup from the referenced database
Message "Proceed to data"
Yes - takes used to next new worksheep
No - default A1 to current date and await user input
How / where do I code this to activate after the user enters a valid date?
I am looking for is VB code to firstly have a message box with an input box on (that bit i can do). The text and number put into the message box is then used to search the table for the information that relates to it.
The ideal would be for the code to find the data and then copy it either to the clipboard or to a section of the workbook.
The tables I am searching can be put into which ever format is easiest. Below is an example table;
A B C D E
1 A.1 Side Road Correctly Left
2 A.2 Hit in Rear Left
3 A.3 No known Police ref
4 A.4 Vandalism
code that would generate the 'Not Found' message
I have a date in HC4, which appears in column 112, so cannot understand why it finds nothing ?
Sub Macro6()
Dim C1 As Range
Application.Goto Reference:="CURRENT"
Selection.Copy
Set C1 = Range(Cells(4, 8), Cells(4, 200)).Find(Range("HC4").Value)
If Not C1 Is Nothing Then
C1.Offset(1, 0).PasteSpecial Paste:=xlPasteValues
Else
MsgBox "Not found"
End If
Range("A1").Select
End Sub
I have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1
Sub getfilepath()
Dim filepath As String
filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file")
UserForm1.Show
End Sub
Userform 1
Private Sub OkButton_Click()
Unload UserForm1
End Sub...........
