Prompt Message Of Time Limit When Time Is Entered
Is it possible to place a prompt message regarding the time limit or return time when entered time is place on the worksheet? Like "Please be back at 8:30 AM" when the user click the Start time button at 8:00 AM.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Prompt Message Box Of The Time Remaining
I am making a break timesheet. My UserForm contains Start and End Time button. User clicks start button, a message prompt will appear containing the time he needs to be back in taking his break. The start time of his break will be pasted on the worksheet. After that, user needs to click the End button to paste the end time he returned. A message prompt will appear stating the remaining time of his break if he comes before the allotted break time say " You still have 00:15:00 left" click "Yes" to end break click "No" to continue your break." If the user click Yes, the time he click the button will be pasted on the worksheet. Here is the code I have but I am receiving error message "Method 'Range of object_Global failed":
View Replies!
View Related
Prompt Early Log Out Time Using Msgbox
i have an excel file which tracks break time. The program works by logging in the start time of break and the log out time of the break of every employee. What I would like to do is to have a prompt if the user immediately logs out at an early time. Say if the user's start time break is 1:00 PM, if he happens to log out immediately, he should be given a prompt that he can only log out after 25 of his total 30 minute breaktime. Thus he can only log out at 1:26 PM. My code below currently logs in and logs out the time but without the prompt i would like to have.
View Replies!
View Related
Time Limit On Code Execution
I have a function which will allow me to search for combination of numbers which will sum to zero. However, because the range could be as long as 300 rows or even the possibility of not finding the combination that will sum to zero, the macro will take ages to complete or even causes the whole excel to hang. So What i want is to instruct macro to stop doing the search if it cannot find the results after say 20 minutes of searching. Is that possible?
View Replies!
View Related
Time Limit To Keep File Open
A coworker of mine will keep a shared file open for hours at a time, not doing anything to it, just keeping open, meaning no one else can edit it as required. Is there a way to set a time limit for that file to remain open before it saves and closes the file? The file shouldn't need to be open more than 30 minutes at a time for any individual. If it's required to stay open longer for certain instances, is there a way to extend the time as well? I can't find anything even remotely relating to time limits on Excel files. Is there coding or an app I need to apply to accomplish this? Is there an option I haven't seen in the program already?
View Replies!
View Related
AutoFilter Reset Each Time Workbook Entered
I have a workbook that is accessed through a network by many users. The one problem that occurs with certain users is that they leave the autofilter on when then are in the spreadsheet. It has an autofilter on each title, and the user initials are an option to filter...certain users leave the filter on when they save the sheet so the next time someone else goes in, it only displays the previous users results. Is there a way to reset the autofilter for the user initials each time the sheet is opened?
View Replies!
View Related
Display End Time Automatically Upon Entering Start Time And Time Usage
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View Replies!
View Related
#NUM! Message When Getting Time Difference
does anybody knows an idea how to get the time difference without getting the #NUM! error message? Column A contains Start Time while Column B contains end time, if the time in column A is 11:45 PM and the time in column b is 12:15 AM, then I would get this error message...any idea how can i get the time difference without having to use the [hh]:mm format? i would like to use the hh:mm AM/PM format instead.
View Replies!
View Related
Run Time Error Message 1004
Every time I run it I get a Run Time Error Message 1004 when trying to custome sort on D4. Rng2.Select With Selection .Validation.Delete .Sort Key1:=Range("A4"), Order1:=xlAscending, Header:=xlYes .Sort Key1:=Range("D4"), Order1:=xlAscending, Header:=xlYes, _ OrderCustom:="L,M,H,Contract", DataOption:=xlSortNormal End With
View Replies!
View Related
Message Box Instead Of Run Time Error
I have a vba code that I wrote out to search for a file and update data on a spreadsheet with the new file... however I've come to a point where I'm not sure of what code to use. If I search for a file that is not there I get a runtime error and of course it ask me to end or debug. What I would like for it to do instead is search for the file and if it is not there... display a message box stating that the file searched for is not found and automatically closes the workbook after OK is pressed. Here is the code for those who may need it....
View Replies!
View Related
Generate A Message Prompt
I am currently using the below to generate a message prompt. I have two questions that require assistance. 1. How can I furthur tweak it to show the value contains in the cell that correspond to the date? For example in cell A2 contains date value; Cell B2 is the order number. If the date in A2 matches today's date, the message prompt should carry Cell B2's value instead of B2 that is displayed as of below code. 2. Can I set the prompt date to be like 15 days after today's date? Example: Today is 05/01. There will be a prompt if the date in cell A2 is 05/16. Private Sub Workbook_Open() Dim r As Range, ff As String, msg As String With Sheets("Test") Set r = .Columns(1).Find(Date, , xlFormulas, xlWhole) If Not r Is Nothing Then ff = r.Address Do msg = msg & vbLf & r.Address(0, 0) Set r = .Columns(1).FindNext(r) Loop Until ff = r.Address End If End With MsgBox IIf(Len(msg), "Matches Found:" & msg, "No match found") End Sub
View Replies!
View Related
Keep Code Running When Message Prompt Shows
I have code to open another workbook and run a specific macro. I plan to then take that and copy it over to my workbook. The problem I am encountering is when I run this macro, at the end of the code, a form/msg pops up stating it is complete. This then automatically stops my code from running (from my original workbook). How do I close this form in order to keep my code running?
View Replies!
View Related
Copy Row If DATE & Time In Cell Is Between Time Span
I have a problem regarding sorting data having date and also time within a single cell. Example data (I have written it as code to preserve formatting) A B C D E F 12/5/2008 02:072/5/2008 06:0128804833363 22/5/2008 18:012/5/2008 18:0599271297 Column B is start date and time whereas Column C is end date and time. My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
View Replies!
View Related
Automatically Change Cell (With Time) Color After Time Period Has Passed
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is: i) check whether they are in an input cell ii) if so, then prompt the user with the 'Font Color' dialog box iii) apply the font color selected to the input cell I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View Replies!
View Related
Add This Number To The Start Time, Factor In Break Minutes And Get To The Projected Completion Time
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View Replies!
View Related
Skip Weekends Adding Time To Date & Time
I need a formula to add just the time to ' date and time', ignoring weekends. eg: Fri 24-Aug-07 10:52 is the date and time 28:48:00 is the time If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40 But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
View Replies!
View Related
Count Number Of Full Time Periods Within A Time Period
I have thousands of timestamps that have a start & end date and time in 2 separate columns. (one named start and one named end...) I also have numerous set time periods that i'm interested in.. (about a dozen or so) for example 01/01/2008 - 05/01/2008, 07:30:00 - 10:00:00 What i need is to be able to count the number of times the full time period i am interested (07:30:00 - 10:00:00) in falls in between the thousands of start and end timestamps i have. The time periods must also fall within the date range specifed. So if my timestamps were Start: 01/01/2008 06:30:00 & End: 02/01/2008 11:00:00, based on the set time period above, there would be a count of 2 and if my timestamps were Start: 01/01/2008 07:05:00 & End: 02/01/2008 09:00:00 there would be a count of zero as there is not a full uninterupted timeperiod 07:00:00 - 10:00:00 between these timestamps. and if my timestamps were: Start 01/01/2007 07:00:00 & End 02/01/2007 10:00:00 the count would be zer as this is a year early!
View Replies!
View Related
Delete Date & Time Cells Based On Time
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too. I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have. Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
View Replies!
View Related
Automate Macro Start On Time & Stop At Later Time
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find) Private Sub Workbook_BeforePrint(Cancel As Boolean) If Sheet1. Range("A1").Value = "" Then MsgBox "Cannot print until required cells have been completed!" Cancel = True End If End Sub
View Replies!
View Related
Run-time Error Every Other Time The Macro Runs
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time. Every time I get the error, it highlights this line of Sheets("Regenerate Request").Paste This is all of the code up to where I get the error: Sub YesRegen() ' after user has hit Yes on the RegenerateRequest macro, this posts the new request to ' the log, generates the new file and attaches it to an email Application.Run "LogUnprotect" Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy 'Selection.Copy Sheets("Regenerate Request").Activate Application.Run "RegenFormUnprotect" Range("A40:K40").Select Range("A40").Activate Sheets("Regenerate Request").Paste
View Replies!
View Related
Calculating Time Owed Based On Time Worked
I know the title is a bit vague, but I cant think how else to word it! I have a sheet (attached) which works out hours worked, and if the amount is under a specified target, it counts how much time is owed. The problem occurs when someone works more hours than the specified target. I guess I need an IF formula of some kind, to say if the figure is over the target, to put zero in the hours owed column.
View Replies!
View Related
Calculate Processing Time With Fixed Time Paramaters
I am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View Replies!
View Related
To Calculate The Difference Between The Start Time And End Time
This may be a bit vague but here goes. I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30. Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00. If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
View Replies!
View Related
Adding A Time Offset Based On Time Of Day
I am replicating a Matlab program which calculates tide levels at different times of day. I need to replicate it in excel to speed up data analysis and I am nearly there. what happens is I need to apply a time offset to the time of high tide at port a based on the time of day, so if it is: between 00:00 and 06:00 the high tide at port b is 81.6 minutes after the peak at port a between 06:00 and 12:00 the high tide at port b is 74.56 minutes after the peak at port a between 12:00 and 18:00 the high tide at port b is 81.75 minutes after the peak at port a between 06:00 and 12:00 the high tide at port b is 79minutes after the peak at port a I tried this formula, where CO2 has the time/date of the high tide at port a: =IF(CO2<0.75,IF(CO2<0.5,IF(CO2<0.25,CL2+(81.6/(24*60)),CL2+(74.56/24*60)),CL2+(81.75/(24*60))),CL2+(79/(24*60))) The problem is the high tide on 07/01/2005 07:45 is read as 38359.32 rather than 0.32 - is there any easy way to tell excel I'm only interested in the time not the date? I have this spreadsheet setup now to do all the other bits required and i is just the timing that is a problem.
View Replies!
View Related
Converting Normal Time To Epoch Time Format
I'm working on converting some databases. One has entries with normal human readable time format, the other uses the unix epoch time format. Is there a function or vba code that I can use in excel to convert the normal time format to epoch time? I've got a thousand or so entries, so it would be nice to find a way to do this on a large scale.
View Replies!
View Related
Copy N Paste Time Date/time Format
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View Replies!
View Related
Add And Subtract Time And Get Result In Time Format
As mentioned below , in excel sheethow to add and subtract time value and get result in time format. As given in below sheet, suppose i want to calculate each day stoppage duration and finally total stoppge duration. Kindly let me know the farmula or function for the same with example. I'm using excel 2003. STOPSTARTDURATION 10:4512:151:30 0:201:301:10 5:5012:256:35 19:3020:301:00 16:0517:051:00 15:5017:151:25 23:500:000:10 0:001:001:00 23:300:000:30 0:001:001:00 17:2018:301:10 3:504:501:00
View Replies!
View Related
Time W/in Each Hour Of Day Btwn A Time Range
I need a formula to calculate the time (in hours/fractions of an hour) that is "covered" for each hour of the day between a range of times. In other words, I have a "START TIME" and an "END TIME" and for each hour of the 24-hour clock, I want to know how much time this range covers. For example, if my start time is 3:30am and my end time is 5:15am, for the 3am hour, the formula would return 0.5 hours, for the 4am hour it would return 1.0 hours, for the 5am hour it would return 0.25 hours, and for all other hours it would return 0.0 hours. The range of START TIME and END TIME can be up to 24 hours (but not more), but the tricky part is that the START TIME can be on the day BEFORE the END TIME (e.g., START TIME of 10:35pm and END TIME of 5:45pm the next day).
View Replies!
View Related
Time Estimation: Allow A User To Test Their Perception Of Time
I am trying to write a program that will allow a user to test their perception of time. Effectively, what I want to happen, is for a user to be able to press one command button, which will start the timer, and then the second when they think that 5 seconds have passed. The program then needs to record the actual time passed in a cell. Unfortunately, when I tried to write the program, it started a perpetual loop, as the user could not press the second button while the program was running.
View Replies!
View Related
IF Function To Compare Specific Time To Time In Cell
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be: =((I12/100)*25)/D12 After 1pm I would like the formula to be =((I12/100)*25)/B12 I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
View Replies!
View Related
Calculate Date Differences: Time In & Time Out
I'm trying to devise a formula to produce "days in inventory" based on the following data: Date In Date Out (which may be blank if cargo still here) Todays Date Days in Whse (which is the formula I can't figure out!) It needs to work like this, date out - date in, unless date out is null. If date out is null, the result should be calculated based off of todays date - date in.
View Replies!
View Related
|
TRACKER
