Loop Through A List And Hides Rows That Doesn't Contain Value Of Textbox
Nov 26, 2011
I have the below code that loop through a list and hides rows that doesn't contain a value of the Textbox, it works fine but becomes very show where number of records it passed through the loop is greater than 1000, is there more efficient way of writing this code?
I am completely new to using Macros in Excel. I have a cell with a yes or no question. If the answer to the question is Yes then I want rows 30-42 to be displayed. If the answer to the question is no I want rows 30-42 to disappear.
I have tried several different ways of doing this and no matter which one I use I get the same error. It says, "Argument not optional".
Here are the two different ways I'm trying to do accomplish my goal right now.
Attempt 1:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$BS$15" Then Select Case Target.Value Case "" Rows("30:42").Hidden = False
[Code] ........
Attempt 2:
Private Sub Worksheet_Change(ByVal Target As Range) For Each Cell In Range("$BS$15") Select Case Cell.Value Case vbNullString Rows("30:42").EntireRow.Hidden = True
I have a sheet that has the ability to display information for 60 employees, but most of the time there is only 25 - 30 employee row being used.
The sheets starts are row 1 and goes to row 60. A61 has a formula that counts how many employees there actually are and where the last employee is. (example: if A61=32 than I need to hide rows 32 to row 60)
I have a macro that hides and unhides certain rows in a worksheet based on what number (1-10) is entered in a cell on that same worksheet. I have this same macro in different worksheets hiding/unhiding different rows based on this same number. So here's the problem: right now I have a number entry cell on every worksheet. I would like to only have it entered on 1 worksheet, with the rest of the macros reading the cell from that 1 worksheet.
I currently have a worksheet with a range of A1:P2500. I am trying to create a macro that will check every Row to determine if Column A is blank (""). If Column A is blank in this row, It will hide this row and then continue to the next, until all 2500 rows have been accounted for.
macro - show rows ONLY if two columns = each other AND...... Hello Excel Swammis!
I am in need of your assistance again.
I have an Excel report set up as follows:
Col D - Order #'s Col G - part #'s Col H - warehouse code for each part # ("N", "M", etc...) Col K - Qty of part # ordered Col L - Qty reserved for that part # on the order
List of orders starts on row 9.
If a particular line on the order is filled, then Col K = Col L for that row. When the whole order is filled, then Col K = Col L for all rows on that order.
What I need is a macro that identifies FULL ORDERS and hides all other rows. So, if Col K = Col L for all rows adjacent to same order #'s in Col D (AND if Col H has value of "N" or "M" for warehouse code), it will be visible. Any orders with even ONE unfilled line will be hidden.
I am also looking for the reverse of this for a seperate macro. IE: Any orders with even ONE line not completely filled, I want all rows for those orders to be visible and all else hidden (again, only if Col H = "N" or "M").
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I'm trying to print the list of dates for the particular month . where the start date and end date is given by the user through user form.
I have written the below code to generate the dates. but the for loop still continues even when the start date is greater than the end date.
For example if i enter the startdate as 06/01/2014 and enddate as 06/30/2014. the for loop continues and displays date for all 40 days instead of stopping when the condition is met.
I have some code (probably a little inefficient, but still) that should delete any rows that contain nothing in column V. My problem is that it only deletes 1 row at a time:
Dim c As Long Dim Limit As Long Limit = Cells(Rows.Count, 11).End(xlUp).Row For c = 2 To Limit If Cells(c, 22).Value = "" Then Cells(c, 22).EntireRow.Delete xlUp End If Next c
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click() Dim rownum As Integer rownum = 2 'Prompt user with message box asking for input in both text boxes If Me.txtNumber = vbNullString Then response = MsgBox("Please enter a Work Number", vbInformation) Me.txtNumber.SetFocus Else ' Insert the work no., driver, locker, keys issued & keys On hand ActiveCell = Me.txtNumber.Value ActiveCell. Offset(0, 1) = Me.txtLocker.Value ActiveCell.Offset(0, 2) = Me.txtIssued.Value ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
On a multipage user form, a combobox control allows the user to select a value from a list, which automatically populates textboxes with other fields from the same list. This works perfectly. I tried to set up another combobox that would work in the same manner, but referencing an entirely separate worksheet and returning the appropriate values from that list to its related textboxes. My problem is that both comboxes are automatically populating ALL the textboxes, ie combobox1 returns the correct information in its related textboxes, but also changes the information in the textboxes related to combobox2. Combobox2 does the same in reverse. I can at least see and understand why this is happening - the combobox code for both is telling ALL textboxes with numerical tags to update.
Private Sub cmbPAYERefFirst3Digits_Change() Dim rFoundSource As Range
The field list does not appear when I create a pivot table in Excel 2007. It works properly if I start Excel in safe mode. I have toggled the field list button in the PivotTable Tools show/hide ribbon and I tried repairing Office 2007 from the control panel.
I have written code in which cell color changes according to cell value. To change cell value I have used drop down list (Data/Validation/List). Main question/problem is code works well when cell value is changed by typing from keyboard only.
Code doesn't work when cell value is changed using drop down list.
I'd like to tell Excel that anytime it finds the text "ABC" anywhere in any cell in column B but doesn't have any data in column A, to delete the entire row.
I would like to take a List of numbers, which come from a separate spreadsheet, place them into a UserForm text box and then use a command button to input the list of numbers into a column of cells. The list would often vary, between 1 and 10 entries. But if I could do this, I would be able to resolve an issue with my spreadsheet that continues to haunt me (the dreaded number stored as text.....). I know that you can assign a single textbox value to a single range-cell value. But if I could input a list at a time, it would obviously save a lot of effort.
Example
In spreadsheet #1, I would copy the list below.
25466 87550 66985 44252
In the user form I would paste these numbers into the text box and they would be input into Sheet #2
I've created a variable number (i) of text boxes at run time (i also named them, "txt"&i, at the same time), i'm now trying to get the values entered in these to fit into a column that has been inserted during the same sub routine. I'm having a bit of trouble refering to the text boxes though, this is the patch of code i'm struggling with:
Dim TextBox As String For i = 0 To 2 * NumVar - 1 TextBox = "txt" & i ActiveCell.Offset(i, 0).Value = TextBox.Value Next i
I also tried this:
Dim TextBox As Object For i = 0 To 2 * NumVar - 1 TextBox.Name = "txt" & i ActiveCell.Offset(i, 0).Value = TextBox.Value Next i
Code that will make it so that when a checkbox is UNCHECKED, the sheet that it originally opened re-hides itself? In other words, I have a mcor that works great that allows for a checkbox when checked to unhide a worksheet and take the user to that sheet. Now I need it si that when it is UNCHECKED, the sheet goes back to it's hidden state. This is what I currently have that UNHIDES it. Obviously somehow I need it to REHIDE it after being unchecked:
How would the corrected code look AFTER being added to this one:
Sub CheckBox615_Click() Sheets("FedEx Freight Opp Form").Visible = True Sheets("FedEx Freight Opp Form").Select Range("B16").Select End Sub
I have a sheet that is autofiltered. Once a user autofilters columns 20, I would like to hide the arrow for that column so the user can no longer autofilter using that column. When I run the code - it hides the arrow in column 20, but then it unfilters all the data . . . can I hide the arrow in column 20 but keep the data as it was filtered before the code ran.
Dim c As Range Dim i As Integer i = Cells(2, 1).End(xlToRight).Column Application.ScreenUpdating = False
For Each c In Range(Cells(2, 1), Cells(1, i)) If c.Column = 20 Then c.AutoFilter Field:=c.Column, _ Visibledropdown:=False End If Next End Sub
to ensure the user ends up looking at UserForm5 after having closed the UserForm2 with the x sign.
It works just great - the user gets logged on and can use the UserForm2 but when he/she closes the form with the cross and tries to lo on aner using the UserForm5 - which pops up autmatically due to the above code, both of the UserForms get cloed (or hidden).
Private Sub CommandButton1_Click()
Dim popup As Variant
If ExecuteExcel4Macro("'D:[target.xls]Trg Info'!R1C255") _ = UserForm5.TextBox2.Value And ExecuteExcel4Macro("'D:[target.xls]Trg Info'!R1C256") _ = UserForm5.TextBox3.Value Then
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet() Dim ColNo As Integer Dim rng As Range Set rng = ThisWorkbook.Sheets("Week2").UsedRange
So I have a pivot table of about 2000 rows with data on employees.
In the table, there is a field associating each employee with a location (midwest, southeast,where ever) and I have a report filter on it that lets me view only people from a given region.
It was working fine, but I'm doing a lot of VBA macro related to the pivot, and I think I somehow changed a setting somewhere in the process and don't know how to reverse it.
When I apply the filter now, it only shows data for people in the region i choose, except it still shows all the other lines that should be hidden, just with no values. Here is a crude visual
Name region sales Jim_____MW__10 Henry___MW__34 Jerry____SW__20 Aaron___SW__44 Scot____MW__22
AFTER FILTER for "MW" Jim_____MW__10 Henry___MW__34 Jerry________0 Aaron_______0 Scot____MW__22
Above is the formula I am working with. I am inserting it into row 4 thru row 996 in a number of different columns. The auto fill function works great for this part of the formula….
However, this part Z29:Z39 I have to enter manually row by row until I can figure out a better way. Do you know an easier way?
To put this formula… =IF(OR(J4="",K4=""),"",NETWORKDAYS(J4,K4,Holidays!Z29:Z39)-1) Into any column row 4 thru row 996, without having to change Z29:Z39 for every row, since I cannot rely on autofill?
Is there a way to provide filter with a list of criteria but when it doesnt match all of the criteria it still uses the filter on the criteria that it does match?
However sometimes for example B will be missing, or H or B H I will be missing etc... is there a way to provide all of the criteria and it will not error if the criteria is not all there?
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
