Run Time Error '424' Text In TextBox
Aug 17, 2007
I have an excel workbook with a form... Not I used this for and the code in other workbooks but this one just does not want to work.... I think the problem is somewhere in the code below but I can't point it out...
Private Sub UserForm_Initialize()
cboDocument.Value = ""
With cboDataType
.AddItem "Voluntary"
.AddItem "AIP"
.AddItem "CA Low Cost"
.AddItem "Takeout"
.AddItem "Terr Cr"
.AddItem "Vol Cr"
End With
View 7 Replies
ADVERTISEMENT
Apr 15, 2009
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies
View Related
May 15, 2006
iam trying to hightlite the textbox text after the error message.
Private Sub txtRoofWidth_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If Not IsNumeric(Me.txtRoofWidth.Value) Then MsgBox "Use numbers only", vbCritical, "RoofWidth"
With txtRoofWidth
.SelStart = 0
.SelLength = Len(txtRoofWidth)
End With
Frame23.Visible = False
End Sub
View 5 Replies
View Related
Dec 11, 2008
I have a user form on which I need to create a textbox every time the user clicks a button. There are too many to create them all in advance and make them visible when needed. The sample attached, from this forum, is good, except, the numbers in the text box just scroll along and I need to see all the text typed into my textboxes. I would like the textboxes to be multiline, wordwrap and have them resize according to the amount of text.
View 6 Replies
View Related
Feb 7, 2007
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Mar 28, 2013
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
View 2 Replies
View Related
Jun 17, 2006
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
View 3 Replies
View Related
Oct 4, 2012
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
View 1 Replies
View Related
Oct 8, 2008
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
View 7 Replies
View Related
Oct 10, 2006
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.
Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste
This is all of the code up to where I get the error:
Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email
Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
'Selection.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40:K40").Select
Range("A40").Activate
Sheets("Regenerate Request").Paste
View 10 Replies
View Related
Oct 16, 2013
I have this line of code:
Code:
If Left(value.use_type, 1) = "D" Then
Where use_type is a field in a user form.
I am getting an "object required error"
View 2 Replies
View Related
Apr 10, 2007
This code works fine, the problem is if I put a number in, and then backspace in the textbox to change the number, I get a runtime 13, type mismatch. This error only occurs when I delete all the numbers in the cell. For example, say the number in the cell is 5025. If i change it to 5123, that is I did not have to delete the first 5, it will work. If I want to change to something like 4167, i must delete the first 5 and it will give the error. I have only been using VBA for a couple weeks, I assume it's something simple.
Private Sub TextBox1_Change()
Dim StaffCost As Single
Dim AvgDriveTime As Single
Dim AddlDrives As Single
StaffCost = OLEObjects("TextBox1").Object.Value
AvgDriveTime = Range("E5").Value
AddlDrives = Range("F5").Value
With Range("G5")
.Font.Bold = False
.Value = StaffCost * AvgDriveTime * AddlDrives
End With
End Sub
View 4 Replies
View Related
Jul 19, 2014
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
View 7 Replies
View Related
Mar 22, 2013
I have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
View 9 Replies
View Related
Jul 29, 2008
is it possible to place time in a textbox on a userform?
I am trying to make 5 textboxes to display different time zones.
View 9 Replies
View Related
Oct 26, 2006
I'm attempting to calculate the total number of hours between a start time and end time using textboxes on a Userform.
Here is my latest attempt:
Private Sub D24_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim myvalue As String
Dim myhour As String
Dim myminutes As String
myvalue = D24.Value
Select Case Len(D24)
Case 1
myhour = "0" & Mid(myvalue, 1, 1)
myminutes = "00"
Case 2
myhour = Mid(myvalue, 1, 2)
myminutes = "00"
Case 3
The above codes are an attempt to force an entry as time (7, 07, 700, 0700=7:00 / 13, 1300=13:00 etc.). However, the result is not correct.
For example:
Start Time in Textbox(D24)=07:00
End Time in Textbox(D25)=17:30
Result in Textbox(D27)=0.4375
Desired Result in Textbox(D27)=10.5
I've never calculated times in textboxes,
View 3 Replies
View Related
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
View 4 Replies
View Related
Jun 28, 2006
I'm learning 'on-the-job' to code VBA macros and about a week ago I asked a colleague to test (UK/Australian) date entry into a textbox on a userform. I wanted to ensure users can enter virtually any acceptable date format. About 10 minutes after sending the colleague the workbook, she advised that inputting 29 February and a year that is not a leap year had the effect of showing the textbox date in reverse and transferring that date to the workbook with the year indicated as "29" eg. 06-Feb-29.
Since then, I've spent a good deal of time seeking a correction to the code. I've tried scripts for 'If IsLeapYear' with the 'MonthLength = 29' etc, various other if statements and shuffling the original date order of my code. The unadulterated code is below. Does anyone have an answer (other than an Error Handler with a msgBox, informing the user that the date format is wrong)?
Private Sub txtMonth_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
Dim dDate As Date
dDate = DateSerial(Year(Calendar1), Month(Calendar1), Day(Calendar1))
dDate = txtMonth.Value
txtMonth = Format(dDate, "dd-mmm-yy")
On Error Goto EndMacro
Exit Sub
EndMacro:
MsgBox "The date format you've entered is not a valid format!"
txtMonth.SetFocus
On Error Resume Next
End Sub
View 5 Replies
View Related
Jul 22, 2014
I have a timesheet, with a custom format of [h].mm. In my userform, I have a textbox which I would like to use to enter a time in, but when I run the macro, the time shows up correctly (such as 0.12 for 12 minutes), but it is still calculating as text. I've tried all the various codes I have found throughout the board but nothing has worked so far. I can get as far as making 0.12 minutes show as 12.12.00 AM, but then it shows the whole time instead of the 0.12 which the cell is formatted to do and does not calculate it at the bottom where I grab all the times from that column.
View 1 Replies
View Related
Feb 21, 2012
I've got a userform which I'm developing (my first) and I have two textboses:
Textbox6 = start time & Textbox7 = end time & Textbox10 which contains the calculation (Textbox7 - Textbox6).
Now I have code that works great for normal numbers however I need to be able to make the calculations in TIME (hence the start time / end time).
How I can amend this code to be able to calculate total time between textbox 7 and Textbox6.
Private Sub TextBox6_Change()
If TextBox6.Value = "" Then Exit Sub
If TextBox7.Value = "" Then Exit Sub
TextBox10.Value = CDbl(TextBox6.Value) - CDbl(TextBox7.Value)
[Code] .......
View 3 Replies
View Related
Nov 3, 2013
Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
View 2 Replies
View Related
Jul 19, 2013
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies
View Related
Jul 23, 2013
I have a textbox on a userform in which I want the users to enter a valid time, such as "1:20" or "0:15". How can I test this input to verify it is a valid time? Also, after this time is entered, how do I subtract it from the current time which I am displaying in another box>
View 6 Replies
View Related
Jun 2, 2006
I'm developing a local timesheet userform application and want to capture times which may be greater than 24hrs using a textbox/spinbutton pairing.
I've managed to pair up and work with times up to 24hrs but the output always resets after 23:55.
I've also tried formatting the output as "[h]:mm" but without success.
Private Sub sbDTime_SpinUp()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
Private Sub sbDTime_SpinDown()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
View 9 Replies
View Related
Oct 27, 2012
I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.
My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?
View 6 Replies
View Related
Mar 14, 2014
I am having difficulty trying to find a walkthrough or any other information on how to pair a spinner box to a textbox. Preferably I would like it to show 12:00 and move in 15 minute increments and I seem to be hitting many roadblocks and errors.
View 1 Replies
View Related
Dec 3, 2008
I am sure this may have been asked before ... but couldnt find it on a search
I have a number of userforms in an excel database, all with add, edit search capabilities.
Several of the textbox's have a time format, when I enter the time it is shown in hh:mm format, it is stored on the spreadsheet in the same format. but if I use the search function to recall a record and display it on the userform, to allow ammendments the time is always shown as a decimal. Can I set it to display the time as entered.
An example of some coding for a text box is shown below
Private Sub TxForTime_AfterUpdate()
TxForTime.Value = Format(TxForTime.Value, "hh:mm")
End Sub
View 3 Replies
View Related
Sep 28, 2007
I need to insert text at the curson position in a text box on a VBA form. I know how to make the button not take the focus; I just need to know how to pass the cursor a timestamp.
View 7 Replies
View Related
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
