End(XlUp) For Last Used Row In Column
May 16, 2007
I have copied a piece of code and am trying to understand how it work. The scenario is that the following values are in Column A (starting with cell A1) i.e. A1 contains the value 81 and A5 contains the value 124:
81
44
713
997
124
I can't understanding the working of the following line of
iRow = Worksheets("Sheet1").Cells(Rows.Count,1).End(XlUp).Row
Here's my understanding:
The focus is moved to the last row of Column #1 in Sheet1. This is achieved by
".Cells(Rows.Count,1)" Then the focus moves up to the first cell that contains any value. This is achieved by
".End(XlUp).Row"
I was expecting that after execution of the above code, iRow it will hold the value 124 (which are the contents of the 1st row that is encountered when the code executes ".End(XlUp).Row"). However the debug window shows that iRow contains the value 5? Seems like that contrary to my understanding, iRow is holding a pointer to A5?
View 5 Replies
ADVERTISEMENT
Jun 20, 2007
the below code adds a new row with data to the last blank row on the sheet how do I change it so that it leave the last row and inserts above it.
the last row is a sum of the columns ....
View 9 Replies
View Related
Apr 29, 2008
I have a line of code used to select an area to be copied and pasted somewhere else
Range("A1:" & Range("AD65536").End(xlUp).Offset(0, 0).Address).Select
however the spreadsheet that supplies the data this selects has been changed and now the last column AD is empty and so this no longer works and selects only the first row of data.
Ideally I need a way of selecting all the rows which have data in, from columns A to AD, based on recognising the last row using column N rather than the last column. I'm not sure this is possible though.
View 9 Replies
View Related
Aug 30, 2006
After searching the forum, I thought I'd found the solution to pasting in the next empty row. I have a macro in one workbook (well, there's 17 of them!) that selects a specific sheet's UsedRange - less the heading row - and copies it (this works). I then switch to the master workbook and click another button to paste the data; the macro finds the correct sheet and pastes the data (1000 records) but when I paste data from the next workbook, it starts at A1 instead of ws. Range("A" & (LastRowA + 1)).
Sub PasteRCdata()
Dim ws As Worksheet
Dim LastRowRec As Long
Set ws = ActiveWorkbook.Sheets("data1")
LastRowRec = ws.Range("A65536").End(xlUp).Row
On Error Resume Next
ws.Range("A" & (LastRowA + 1)).PasteSpecial xlValues
LastRowRec = 0
Application.CutCopyMode = False
End Sub
Here's the code that copies
Dim rng As Range
'code here to select the correct sheet
Set rng = ActiveSheet.UsedRange
rng.Offset(1, 0).Resize(rng.Rows.Count - 1, _
rng.Columns.Count).Copy
View 3 Replies
View Related
Nov 14, 2009
What is the syntax for executing a 'SHIFT+xlUP' function in an Excel macro?
View 4 Replies
View Related
Feb 12, 2007
Is it possible to run Range("A64000").End(xlUp).Select and have it skip the blanks and zeros until it hits an actual number?
View 9 Replies
View Related
May 19, 2007
I dont know if after you search it will let you enter Xl. I had already search the threads and can't explain with out using XlUp.
Sheets("Input Data"). Range("D6:AO505", Worksheets("Input Data").Range("D510").End(xlUp)).Copy Sheets("Matrix").Range("B52")
But Sometimes there will be no data in the range and this code will copy the row above the array D5:AO5 and paste in the Matrix2 range B52 which is the catalist for a cascade of errors. The only thing I can think of is to use named ranges - But a this stage when the calculations fallover - well a little anoying
View 6 Replies
View Related
Dec 7, 2011
I have several columns of sub-total and total as shown in the screen print. I need some code that will allow me to take the value of total and subtract it from sub-total. The number of rows changes weekly so I cannot simply state =f10-f11
I thought xlup and offsetting would be a good way to do it, but I'd still need to assign a cell number.
View 1 Replies
View Related
Mar 24, 2008
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long
j = 1
For i = 1 To UsedRange.Rows.Count
Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value
Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value
Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value
j = j + 1
Next i
End Sub
View 9 Replies
View Related
Jun 30, 2014
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
View 8 Replies
View Related
Jan 31, 2008
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
View 9 Replies
View Related
Apr 22, 2009
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies
View Related
Apr 25, 2014
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
View 5 Replies
View Related
Aug 13, 2014
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
View 6 Replies
View Related
May 29, 2014
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
View 3 Replies
View Related
Oct 6, 2008
I have a spreadsheet with three columns (A,B,C). I want the third column C to be column A - B (A minus B) for each row, but only if there is a value in column B.
If there is no value in column B, then I want that row in Column C to just stay blank.
View 4 Replies
View Related
Aug 3, 2006
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
View 9 Replies
View Related
Apr 27, 2004
=COUNTIF(A19:A28,(AND(B19:B28="YES",C19:C28=5)))
What is wrong with my formula above? I am trying to count Colunm A if the value of Column B is "YES" and Column C is equal to "5".
View 8 Replies
View Related
May 27, 2007
I am tying to total all the sales for a given customer. This is what I have at present
Customer Sales
CustA 1000
CustB 500
CustA 1250
CustC 750
Elsewhere in the spreadsheet I have the following
Customer Total Sales
CustA
CustB
CustC
As you can probably see I need to get the sum of each customers sales and display this under Total Sales. I thought about using VBA but am not really sure where to start.
If anyone has any ideas how I could progress this I would be most grateful. I am using excel 2007
View 9 Replies
View Related
Mar 7, 2014
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
View 14 Replies
View Related
Mar 13, 2009
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
View 2 Replies
View Related
May 8, 2009
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
View 3 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Apr 4, 2014
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
View 4 Replies
View Related
Sep 19, 2012
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
View 1 Replies
View Related
Mar 5, 2014
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
View 2 Replies
View Related
Jun 6, 2014
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
View 6 Replies
View Related
Jun 7, 2014
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
View 2 Replies
View Related
Feb 16, 2008
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
View 9 Replies
View Related
Dec 20, 2013
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
View 9 Replies
View Related
