I have a set series of numbers as follows:
7550-0101
7536-0130
7538-0131
7535-0128
7536-0126
[Code] ....
I would like to disregard the digits before the hyphen (not always four digits) and check only the values of the last set of digits (also not always 4 digits). I would like to search for the greatest suffix used to find the next available number. In my data above the result would be 132.
I am trying to find the formula to find the greatest number/date etc in a column, I'm not sure which one I should be using?
For example I have a list of dates in Column B and I want in cell A1 to show the latest date in that column, so if the dates are
21/12/2008
05/02/2009
it would show 05/02/2009 in cell A1.
I have values like this in a column
1
1
2
2
2
3
3
3
3
In this column '3' has the maximun number of repetions of 4. I need to get '4' as the output of my code..
I have wave data and need to extract out of a column the greatest rate of change i.e. start from a1 if the numbers are going down find the first number that starts going upward...and put in column b...then find the next first number that is going down and put in column b....and so on and so on all the way down the column.
View 4 Replies View Relatedto update these values via a form in this sheet. I can find the correct row to be edited by entering a value from column A and B. The problem is if I want display the values of that row first and then change it. If I want to change row 10 data how can I bring back the value in ROW 3 AND THE COLUMN VALUE? The next step would be to do the actual update if I want to change ROW 10 to "Ooi" and a sales value of 200?
This is what I have done so far:
Dim myRows As Integer
With Sheets("Mrt")
'Retrieve history information for row
For myRows = 4 To 49
If comboxDay.Text = Range("A" & myRows).Value And textboxdescription.Text = Range("B" & myRows).Value Then
textboxbedrag.Text = Range("C" & myRows).Value
chkBTW_Ja.Value = Range("D" & myRows).Value
txtNota.Text = Range("S" & myRows).Value
End If
Next
End With
Picture attached to show how sheet looks like.
I'm having trouble coming up with a formula that will find the first month with a number in the 'Total' row (row 22) without using an array function or VBA. The months are in row 13 and can vary from 1 to a whole lot. The number of line items, column C, will also vary, but I wouldn't expect that to effect any function (aside from changing the row designation). Here's what I put together using an array function: {=MATCH(TRUE,ISNUMBER(D22:L22),0)}
Again, don't want to use an array function. Other people will be using this and when they mess with it, i don't want them asking me why it won't work anymore.
******** ******************** ************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutM14M15M16M17M18M19M20M21D22E22F22G22H22I22J22K22L22M22=
CDEFGHIJKLM12LineMonths*AROTot13123456789141*********0152**5*6*2**13163**4**3***71740000*****0185*421***5**30196***1***8*9207*4**9**3*16218*********022Total*
8301153711*
75Sheet1*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The simple table (attached) represents our problem.
We want the letter in Column-B that corresponds to the last non-zero entry in Column-A. So in the example provided, the answer will be cell B12 which is "L". Also, if there are blanks (rather than zeros) below the last non-zero entry, it still needs to work.
I have a a spreadsheet with content (text) in one cell pr line. The content can be in the range column 1 to 8. I want to make a formula where I get the number of the column where there is content. I know how I can make this by using nested IF's, but are there any better proposal?
View 3 Replies View RelatedI Have a row witch contains some numbers…..some of them are zero. I want to look: column after column throw this row and find first not zero item. For example:
A B C D E F
0 0 0 12 3 0
Result is “D”
BUT!
U want to make it with standard excel functions, without programming any user functions with VBA! Only Excel…
I'm trying to do something similar to the Vlookup function (or Index/Match method) but with two or more parameters to match instead of just one. I want to returnn the Row where two columns match the input parameters. Using Vlookup is a problem because it only returns the first one.
Is the standard method to us Vlookup for one parameter, then check the second and if it doesn't match reduce the search field, find the next and check the second again etc? That would work but it would be much simpler if there's a 2 parameter function.
i have 2 sheets one called "IS" and the other called "AS" in cell a2 of "IS" is a number that i need to have excel look up in column a of "AS" once it find that number i need it to return the number thats in column e of that row to sheet "IS"column d. summary: a2 of "IS" looked up on sheet "AS" and returns the number in column e to cell d2 of "IS"
View 3 Replies View RelatedI'm using the LOOKUP function to find the largest number and then return the name from a different column, it looks like this:
=LOOKUP(LARGE(round1!$F$2:$F$65,1),round1!$A$2:$A$65)
but all I get is hashN/A?
I have a database with over 100 products listed across the first row.
Column a has a list of over 500 projects. Across each project various columns are marked with a number depending on how many of each products are being used on that project.
For Example
A B C D E etc.
Products --> X Y Z AA
Proj 1 2 3
Proj 2 1 4 5
Proj 3 2 4
etc.
I want to be able to create a report for any given product.
The report could look like,
Product Z
Proj 1 3
Proj 3 2
So I need to lookup the product code across row 1 and determine the column number and then INDEX down that column and find all non blank cells and read the project names from column A.
I am familiar with formulas with INDEX and V/H LOOKUP functions. I am not very good with VBA codes.
Yet some more changes to a badge log, have worked out most of it but am having problem selecting the right row. The problem I'm having is finding the badge number (set in column J) and then finding the row that doesn't have the check out date (column B).
I know this code will find the first entry in the data sheet, I just can't figure out how to set it up to find the badge number that hasn't been checked in yet.
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
I've used the below, for example in Column E, the actual data starts in row 4, so I can't use the full E:E syntax:
=IF(ISERROR(INDEX(Data!E$4:E$65000,MATCH(9.99999999999999E+307,Data!E$4:E$65000))),
INDEX(Data!E$4:E$65000,MATCH("z",Data!E$4:E$65000)),
INDEX(Data!E$4:E$65000,MATCH(9.99999999999999E+307,Data!E$4:E$65000)))
The above basically checks for a number, and if fails (there could be #N/A, #DIV/0!, text, or Number-stored-as-text in any cell here), it checks for text. (the 65000 is arbitrary; we will never have more than a few thousand rows)
However this is not reliable--the main problem seems to be number-stored-as-text. And it's not possible for me to do the Paste-Special Multiply *1 trick to convert the numbers because this data is dynamically generated from a database--the user would have to do that every time the sheet opens.
Is there not some formula that simply says: "Give me the last non-blank cell after row 4 in column E, regardless of what type of data"? (Excel 2007)
I am trying to find the last cell with data in a spreadsheet once this has been found select all up upto cell A4 and then format these cells into number format to zero decimal places so far I have the following which finds the last cell:
LR = Cells(Rows.Count, "A").End(xlUp).Row
Range(Cells(LR, 1), Cells(LR, "A")).Select
ColumnA Column B ColumnC (Yes/No)
2121 345766
23423 6456546
4234 6456456
7567 64566456
76756 654645
67567 3344534
76575 34534534
756756 45345
7657 534545
756767 4534534
756756 435345
Hello,
What I am trying to do is
Search the number written at ColumnB in ColumnA and if found write YES to column C
if not write No
I'm trying to find the largest number in a row and then have the column heading (text) as the result. I can find the largest number by using =max(numb1, numb2 ....) but then how do I get the heading of the column as the result. An example of what I want to happen is below
Red
Green
Blue
Orange
Yellow
Result
2
4
3
6
1
[code]...
I anticipate an issue where 2 columns have the same largest number and not sure how to over come this either with multiple answers
I am building a Workbook which takes data from SheetA and inserts it into SheetB.
Part of the data is only entered when a positive value exists.
I then do an export from SheetB.
The problem is that I need to get the column number and pass it to the cell reference based on the field name in row 1.
Dim sFindstring As String
Dim rFindcell As range
Dim iR As Integer
Dim iC As Integer
sFindString = " Find this string in the cell"
'Using cells find the findstring
Set rFindCell = Cells.Find(What:=sFindString, After:=[A1], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
'OK so look here
iR = 3
'I am trying to pick up the column number
iC = rFindCell.Column
rFindCell throws an object or with block variable not set error. Is there some property that I need to set.
I want to ask if there is a way to find the next greatest maximum without a ton of auxiliary coding....Is there a function which does that in Excel? For example from the following list it would give 45:
1
34
45
26
78
29
7
I can get the result. It shows #num! in cell F2
How to find the greatest common divisor of two numbers? I can not use the built in common divisor function.
View 4 Replies View RelatedFormula that could find the result and return the greatest text value?
I have over a 1000 records broken down by Leaders of which each is roughly 50 records. in those records, answers are either : 4 hours, 8 hours, 24 hours or 48 hours. I need to have a formula return of the 4 choices, which had the greatest value.
I have two columns of data, in another column I have the difference between these two columns, now I want to show the difference as a percentage. Assume cell A is 0.02 and cell B is 0.03 the difference is 0.01 and the percentage of the difference would be 33% or 0.01/0.03, my problem is when cell A is 0.04 and cell B is 0.01 the same formula wouldn’t work in both cases since in the first A<B and the second A>B is there a way that I can take the difference and divide it by the greater of A and B without having to do it manually?
View 6 Replies View RelatedIn the first picture the Pivot Table is showing the profit of each city in 2010 and 2012. Where I used Sort & Filter Largest to smallest, in order to display the cities with greatest profit.
Prosent.png
But when I switch the values to `% of` year (Previous). I get the change from 2010 to 2012 in percentage. But my PROBLEM is when I want to Sort & Filter from Largest to Smallest, cause I want to show the cities that have had the greatest percentage change from 2010 to 2012. But the I only get the same cities, and when I look at ex. 'Gjovik' is has had a 125 % in change and should be in the top.
So how am I able to Sort & Filter from Largest to Smallest the cities with greatest change in percentage?
I have managed to get a nice array formula to look up count all the Rs As & Gs in some cells and return whichever there are most of (the cells are linked to/fed from another workbook with cells that have either an R, A or G in - nothing else)
And mainly this is working but on one set of cells it returns nothing as there are 2 As and 2 Gs - what is really annoying is that on a set of cells on a another section of the tab there are 5 A's and 5 G's and that returns an A.
I'm trying to use vlookup function in table 2 referencing table 1 using the approximate parameter. However, an approximate vlookup value is by definition the closest *least* value. Is there a trigger of some sort to locate the closest *greatest* value as well?
For instance, if the lookup_value in table 2 is 2.450 but the referenced table 1 only has 2.445 and 2.475, I will only retrieve the respective value related to 2.445 -- how would I retrieve the other value at 2.475?
Essentially, if a lookup_value rests in between two values of whatever is being referenced, I am trying to average those two closest numbers. Is there a function I've overlooked that may help with this?
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
