I am trying to find the formula to find the greatest number/date etc in a column, I'm not sure which one I should be using?
For example I have a list of dates in Column B and I want in cell A1 to show the latest date in that column, so if the dates are
21/12/2008
05/02/2009
it would show 05/02/2009 in cell A1.
I have a set series of numbers as follows:
7550-0101
7536-0130
7538-0131
7535-0128
7536-0126
[Code] ....
I would like to disregard the digits before the hyphen (not always four digits) and check only the values of the last set of digits (also not always 4 digits). I would like to search for the greatest suffix used to find the next available number. In my data above the result would be 132.
I have wave data and need to extract out of a column the greatest rate of change i.e. start from a1 if the numbers are going down find the first number that starts going upward...and put in column b...then find the next first number that is going down and put in column b....and so on and so on all the way down the column.
View 4 Replies View RelatedI have values like this in a column
1
1
2
2
2
3
3
3
3
In this column '3' has the maximun number of repetions of 4. I need to get '4' as the output of my code..
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I have 2 columns: Locations (Column A) & Dates (Column B).
I want to find the most recent date for a selected Location (stored in $G$1).
currently I have in C2: =If($A2=$G$1,$B2,"") copied down the column to the end of data (currently C153). Then in C1: =Max(C$2:C$153).
I also have in D2: =If($C2<$C$1,$C2,"") copied down to D153, and in D1: =Max(D$2:D$153) to find the 2nd most recent date.
Is there some way to condense this into just 2 cells?
See attached file for example (note the columns are currently sorted by date, but that is not always the case).
I need a formula to find the latest date (Column A) a given value appears in Column B.
Column A is a list of dates.
Column B can contain any of 6 values (For example: A, B, C, D, E, F).
And, to make it even more fun, the system I'm working on doesn't allow macros.
I've been using the following code to go the current date on a spreadsheet. I now have to add the current date somewhere else on the sheet How do I modify the following code to only have it look in A:A ? Date is formatted -- m/d/yyyy (1/2/2013)
HTML Code:
Sub gotodateday()
Dim C As Range
Set C = Cells.Find(Date)
If Not C Is Nothing Then C.Select
End Sub
If I name ranges as Months, (Example: January_13. -- I can use the month without the year if it makes a difference),. How would I change it to look for the current month in A:A.
What do I have wrong with this? I want to find a cell that matches today's date and then start with that row by copying a time value in another worksheet to the one that has the dates already.
Sub PunchClock()
'This will copy the current time punched and place it into the correct cell
Range("B3").Select
Do Until ActiveCell = Now()
ActiveCell.Offset(1, 0).Select
Loop
All I need is some direction with this. I tried setting up a variable then check that variable against the current date and I didn't have that one figured out either.
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
I want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv()
Dim ticker As Variant
Dim freq As Long
Dim csheet As Worksheet
Set csheet = Worksheets("Sheet2")
[Code] ....
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this:
Private Sub ProductRegistration_Click()
[D4] = [D4] + 1
End Sub
On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
View 3 Replies View RelatedI have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click()
Dim my_name As String
Dim r As Variant
Dim l As Long
sFind = DockDoorCal.Value
If Trim(sFind) = "" Then Exit Sub
[Code]....
I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.
To explain a little better here is a simplified example of my spread sheet that is in input for the macro.
A
B
C
D
E
1
PART NO.
date in
date out
comp1
comp2[code]......
Column A lists the coponents found on the same row as the seach critria, in this example "12-3".
Column B lists the number of occurances of the components. This search is limited to a date range input by the user.
So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.
*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.
I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.
I have VBA code to perform some actions on data in excel file and then convert all that data into semi-colon separated CSV/text file (code below).
Now, all I want is to add VBA code in the existing macro to find a column header (say, "Application date") and then convert all the dates into YYYY-MM-DD format. The original values in this column don't have a fixed date format.
Code:
Public Sub ExportToCsvFile(FName As String, _
Sep As String, SelectionOnly As Boolean, _
AppendDataOnExistingFile As Boolean)
Dim WholeLine As String Dim FNum As Integer
Dim RowNdx As Long Dim ColNdx As Integer
[code]....
I want to ask if there is a way to find the next greatest maximum without a ton of auxiliary coding....Is there a function which does that in Excel? For example from the following list it would give 45:
1
34
45
26
78
29
7
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday
March 2, 2008Sunday
March 3, 2008Monday
March 4, 2008Tuesday
March 5, 2008Wednesday ...................
I can get the result. It shows #num! in cell F2
How to find the greatest common divisor of two numbers? I can not use the built in common divisor function.
View 4 Replies View RelatedFormula that could find the result and return the greatest text value?
I have over a 1000 records broken down by Leaders of which each is roughly 50 records. in those records, answers are either : 4 hours, 8 hours, 24 hours or 48 hours. I need to have a formula return of the 4 choices, which had the greatest value.
I have two columns of data, in another column I have the difference between these two columns, now I want to show the difference as a percentage. Assume cell A is 0.02 and cell B is 0.03 the difference is 0.01 and the percentage of the difference would be 33% or 0.01/0.03, my problem is when cell A is 0.04 and cell B is 0.01 the same formula wouldn’t work in both cases since in the first A<B and the second A>B is there a way that I can take the difference and divide it by the greater of A and B without having to do it manually?
View 6 Replies View RelatedIn the first picture the Pivot Table is showing the profit of each city in 2010 and 2012. Where I used Sort & Filter Largest to smallest, in order to display the cities with greatest profit.
Prosent.png
But when I switch the values to `% of` year (Previous). I get the change from 2010 to 2012 in percentage. But my PROBLEM is when I want to Sort & Filter from Largest to Smallest, cause I want to show the cities that have had the greatest percentage change from 2010 to 2012. But the I only get the same cities, and when I look at ex. 'Gjovik' is has had a 125 % in change and should be in the top.
So how am I able to Sort & Filter from Largest to Smallest the cities with greatest change in percentage?
I have managed to get a nice array formula to look up count all the Rs As & Gs in some cells and return whichever there are most of (the cells are linked to/fed from another workbook with cells that have either an R, A or G in - nothing else)
And mainly this is working but on one set of cells it returns nothing as there are 2 As and 2 Gs - what is really annoying is that on a set of cells on a another section of the tab there are 5 A's and 5 G's and that returns an A.
I'm trying to use vlookup function in table 2 referencing table 1 using the approximate parameter. However, an approximate vlookup value is by definition the closest *least* value. Is there a trigger of some sort to locate the closest *greatest* value as well?
For instance, if the lookup_value in table 2 is 2.450 but the referenced table 1 only has 2.445 and 2.475, I will only retrieve the respective value related to 2.445 -- how would I retrieve the other value at 2.475?
Essentially, if a lookup_value rests in between two values of whatever is being referenced, I am trying to average those two closest numbers. Is there a function I've overlooked that may help with this?
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I have collected some data on economic factors for different countries. Unfortunately, the dates when I started to calculated my economic factors are different for each country (due to the data available to me).
What I would like Excel to have done is to take the date when I started to measure for e.g. country A (D3 ie 30/06/2007), copy it into column "I" (for country A, it's cell I3) and fill in the following months in the rows below (with always the date of the last day of a month) until it reaches 28th of Feb 2013. Then, it should go up to the next country (country B) take the starting date (D4, ie 31/07/2007), go to the last entry in "I" (ie I71) and paste the date in, fill in the months until 28th of Feb 2013, do the same for country C and so on.
I have started to code a VBA but I am unfortunately a beginner in VBA and totally stuck at the moment. My VBA code does paste in the months but for some reason, it also changes the starting date of the first month.
Moreover, I tried a workaround for the fact that Excel doesnt know when to stop; ie I introduced a "monthdiff" variable which should calculate the number of months between the starting date (which is variable and unique for each country) and the end date (which is always 28th of Feb 2013). At the moment, it only does this for country A.
VB:
Set rng = ActiveSheet.Range("I3" & Cells(monthdiff, "I").Address)[SIZE=4][/SIZE]
I have tried to make this dynamic but have been unsuccessful so far.
Spreadsheet with data&code is attached.
VB:
Sub Macro1()
Dim mainrange As Range
Dim rng As Range
[Code].....
If a sale was made between 2/09/2014 - 2/15/2014 return the date of the following weeks Friday. In this case 02/21/2014.
View 3 Replies View Relatedway to search and display a date from a range of cells based on less than or greater than criteria. For example I have following dates in column A:
A1: 2011/01/04
A2: 2011/02/01
A3: 2011/03/01
A4: 2011/04/01
I want to search for the date which is less than 2011/02/01 from the A column and display that date in B1 cell for example. How do I do that?
I want to do this without using any macros.