VBA - Find Duplicates And Transpose Into New Sheet?
Feb 4, 2014
I have one workbook with two sheets. The first sheet contains the data in columns A & B. In Column A there are a number of values that are the same eg: A1,2,3,4,5 all equal "Home" A6,7,8 equal "Work". In column B there are "Comments" none which are the same.
I need a VBA that will search down column A in sheet one and find all the "Comments" for "Home" and transpose paste the comments into sheet 2 so A1 will be "Home" B1 will be the first comment, C1 the second comment, D1 the third comment and so on.
My sheet one will contain about 1000 different values in Column 1, so I need it to search for duplicates rather than the text "Home".
View 6 Replies
ADVERTISEMENT
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Jun 24, 2014
I'm supposed to find duplicates in sheet_1 Q6:Q251 and copy one of each to sheet_2 D6:D243 as well as unique values from the same column. In a sheet_1 B6:B251 I have values related to Q6:Q251 and I have to copy each of them to sheet_2, E6:I6 in the same row as the related duplicate (I'll have max 5 duplicates). You can find attached simple example of what should be the result (sheet_2)
View 7 Replies
View Related
Jul 30, 2013
I would like to find the values and count duplicates on a sheet. Here is my example:
A1
A2
Organization1
Organization2
XXY
BBA
ACC
XXY
BBA
ABC
I would do countif, but I do not know my values (this is from a report that I ran from a database) and it would take too long to find all the individual values every time I needed to run this report. So this is what I am looking for (a graph would work too).
A3
A4
ABC
1
ACC
1
BBA
2
XXY
2
View 9 Replies
View Related
May 29, 2014
I have attached sample files as reference. I am using excel 2010
I wish to move all duplicates from one sheet (Orders) to another(Duplicates).
Sheet0 is the original sheet(Orders)
Sheet1 is the orders sheet once the duplicates have been removed
Sheet2 is the duplicates sheet
Sheet3 I am also looking to achieve what is in sheet3 so that the quantity and stock code is all in one row as shown in the example sheet3
Basically I am looking for it to finish up like sheet1 and sheet3
Link to files: [URL] ........
View 3 Replies
View Related
Apr 8, 2014
I'm trying to Count duplicate text on sheet 2 and populate the number of times repeated on sheet 1.
On sheet 1 I have A3:A128 and would like the number of times these respective cost centers are repeated in Sheet 2 to populate Column B of Sheet 1.
File attached.
Not sure which formula to use. I tried CountIF but didn't work with 2 sheets.
View 7 Replies
View Related
May 28, 2007
I have a col of dates that change, 9/15, 10/15, 11/05 and reside in col. I
I then have a corresonding cell in row I136, M136, Q136, U136, Y136 and AC136.
I want to find the starting at the earliest date starting in I36 , M136, Q136...
So I136 would be updated to 9/15, M136 = 10/15, Q136 = 11/05, ...
I am thinking a CSE type formula would be a possibility, but need assistance in this or in a piece of code..
View 9 Replies
View Related
Aug 21, 2014
I am trying to transpose data from sheet 1 into sheet 2 using a macro
i want to tranpose A1,B1,C1,D1 from sheet 1 to A1,A2,A3,A4 in sheet 2
then repeat the process for all the data in sheet 1 until it has all tranposed over.
View 14 Replies
View Related
May 29, 2014
My workbook contains 2 sheets one called "UK" the other called "Stock"
I need Rows 75 and 76 from "UK" to be transposed into sheet "Stock" in Cols C and G, respectively.
I tried to do this with Paste Special and Transpose, but because these rows have formulas in them when you transpose it it shows #REF! in each cell.
View 3 Replies
View Related
Feb 19, 2014
I am working on a spreadsheet that has (7) sheets or (7) tabs. The First tab is the "Summary Tab" and the 3rd tab is the "Plate" tab. I am working in a range of cells that go up and down on the "Summary Tab" and I need to fill them with the values from the "Plate Tab" that goes side to side or across. I can enter into the top cell on the "Summary Tab": =Plate!B47 and I will get the value that I need. However, I want to copy the formula or fill down and have it pull the values from the cells on the "Plate Tab" Horizontally like this (as I fill down) =Plate!_$47 Where the "_" changes to "C", "D", "E", etc.... but it stays on row 47!!!! How can I do this????
View 5 Replies
View Related
Jun 21, 2012
I need the following data transposed to the next sheet in this formatClaims
Assessor:
Claim ID:
Quality Checker:
Q/Assessment Date:
Correct Member
Correct Payee
Correct re-imbursement address
Correct amount & currency
[Code]...
where score denoted the marks achieved. with the code for the same.
Claims Assessor:
abc
Quality Checker:
xyz
Claim ID:
165663
Q/Assessment Date:
21-06-2012
[Code]....
View 3 Replies
View Related
Feb 28, 2010
How can i achieve this?
Copy row, create new sheet, tranpose and paste with header row.
So If i have 10 rows with row 1 as header row, it should make 9 sheets.
The name of each sheet should be the one in the first row.
e.g. sheet name = master
header1 header2 header3 header 4 header 5
a b c d e
f g h i j
k l m n o
The result will be three sheets
sheet name = a
header1 a
header2 b
header3 c
header4 d
header5 e
sheet name = b
header1 f
header2 g
header3 h
header4 i
header5 j
sheet name = c
header1 k
header2 l
header3 m
header4 n
header5 o
View 9 Replies
View Related
Feb 28, 2014
Is there a way I can compare sheet 1 Column A, with sheet 2 Column A, and then move any duplicates from sheet 2 over to sheet 3.
For instance,
Employee Numbers that match in both sheet 1 and 2, remove that row from sheet 2 to and insert it into sheet 3.
View 5 Replies
View Related
Mar 21, 2014
I have the below VBA but am getting a 1004 error and when I step into each line I do not see the macro populating the cells as designed. The purpose of the macro is to take a list from the "EmployeeBillableHours" worksheet select the entire list s.tarting from row 2, then goto to "Client" worksheet, then starting at cell J6 paste each item on the list and then move 4 cells to the right and paste the next item on the list to the end.
Code:
Sub ClientListtoClientTab()
Dim lr As Long: lr = Worksheets("EmployeeBillableHours").Range("H" & Rows.Count).End(xlUp).Row
[Code].....
View 1 Replies
View Related
Apr 21, 2014
I have a dimensional array / matrix that is current a 9 by X, where x depends on the amount of entries a user makes.
Anyways my question is that I have a sheet called "Database" and I wanted to know if there was a simple code to transpose my array on that sheet starting at cell "A2".
View 3 Replies
View Related
Sep 24, 2008
Looking for some code that will move a list that goes from B3:B300 (down the column) to "sheet B" A1:IV1 (across the 1st row).
View 9 Replies
View Related
Oct 20, 2013
I've used the following formula successfully to pull data from multiple sheets and provide the total on an analysis worksheet. Example of worksheets and formula.
=DSUM(INDIRECT("'"&A2&"'!D:D"),$B$1,INDIRECT("'"&A2&"'!D:D"))
Example of one of the individual sheets holding original data:
A
B
C
D
[Code].....
Example of what I want to see using the Transpose formula (Analysis sheet):
=TRANSPOSE(INDIRECT("'"&A2&"'!C:C"),$C$1,INDIRECT("'"&A2&"'!C:C")) (My theory that currently doesn't work. I'd like to be able to pull data across worksheets and yield the transposed data into the corresponding row of the same merchant row.
A
B
C
D
[Code].....
View 9 Replies
View Related
Jul 6, 2014
I have a sheet with numbers in descending orders with duplicate in one row and their respective value in 22nd row. I want to find the2nd occurrence of that value. (max. occurrence2 is 2)
Foe example
5----4-----3-----3-----2-----2-----1
A----B-----0---- C-----0-----D-----E
So if i lockup value "3" C should be returned (not 0) and for 2 "D"
see attached also
View 5 Replies
View Related
Feb 3, 2014
Extract data from one sheet to another sheet then transpose automatically.
I have attached the work book of what I'm trying to accomplish.
View 14 Replies
View Related
Apr 21, 2002
I have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.
I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.
Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.
I want to be able to repeat the procedure later if additional sheets need to be added.
View 9 Replies
View Related
Mar 13, 2009
I have two columns of email addresses and I want to make sure that between these two columns there are no duplicates.
View 4 Replies
View Related
Sep 28, 2009
I have a number of tables that may or may not have multiple dupliate enters, I am trying to indentify by name and by date. None of the tables are in the same format, which makes it ever harder for me, but all I want is a return of "duplicate" or "original", this will allow me to have acloser look at the duplicates.
View 7 Replies
View Related
Dec 20, 2007
I have excel sheets that will show a customer account number an ammount they need to pay and there full name and a date when the payment is expected, is there a formula that will find duplicates, if the same entry has been put in twice
View 14 Replies
View Related
Mar 26, 2007
I’m looking for a code that finds all duplicate words in column A & B and change the font of the found duplicate word in column B to ColorIndex = 11 and .FontStyle = “Bold”
I need this code to run frequently and possibly we can combine it with http://www.mrexcel.com/board2/viewto...272792#1272792
The wb is a dictionary and as I’m adding new words in new rows the wb needs to update. It is of course mostly important it updates when I open the wb, but it would be interesting if it could update for every new row (word) added as I might not want to close and re-open the wb just for this.
View 9 Replies
View Related
Mar 4, 2008
is there a way to create a condiction that will check in a colum if there are 3 or more duplicates and color coded to like red.....
I can do duplicates in general but i do not what to know about the 2 that are equal i want to know if there are 3 or more.
View 9 Replies
View Related
Jul 18, 2008
I have a long list of checks and I need to find the duplicates, determine how many dupicates there are for a given check (the criteria is if the ENTIRE ROW is dupicated), and highlight HALF of the duplicated rows.
I am able to sort the table however needed.
Here is the logic I was thinking of following..
If Row is Duplicated
Select Case Boolean
Case True
Count how many are duplicated
If count is even then
NumberToDelete = Count*0.5
For i = 1 to NumberToDelete
Highlight one of the duplicated rows in red background
Next i
Else
Next Record (do not highlight anything)
End If
Case False
'Nothing
End Select
End If
View 11 Replies
View Related
Dec 4, 2008
I'm trying to find duplicates in one particular column. I'm using this formula =if(countif($A$1:$A:$300,A1)=1,FALSE,COUNTIF($A1:A1,A1)=1) in the conditioning format tool but here's my problem:
I'm noticing that some of the cell values have spaces after the entries so the formula is not picking it up as a duplicate. Is there a quick way to remove those unwanted spaces after each entry?
View 9 Replies
View Related
Dec 16, 2008
I need to find duplicates subnet information in row F and mark the words "Duplicate"
Then I need to do the same with Row K. I need to find any duplicate subnet masks.
The reason for this is that I merged two orginizations into one spreadsheet and I need to find the duplicates in Company A and Company B's subnet and mask information.
View 9 Replies
View Related
Jul 21, 2014
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
View 6 Replies
View Related
Sep 23, 2013
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
Sheet1 Â AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506
Result after code has run.
Sheet2 Â AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506
View 2 Replies
View Related
