how would I find the median of a group of numbers? I have a database with a group of numbers associated with a part number. I need to find the median of each part. Here is what I have tried, but it doesnt work =MEDIAN(IF(A:A=A2,B:B))
View 5 RepliesI am really new to VBA programming and I have to automate an excel sheet which has the columns Closed Qtr, Apps Bucket and Res Time.
Closed Qtr has the following entries: Q107,Q207,Q307,Q407,Q108,Q208,Q308,Q408.
Apps Bucket has the following entries:
BU Apps,Global Apps,Quality,others
I have to find the median of the Res Time data based on grouping by Closed Qtr and Apps Bucket, i.e., for BU Apps in Q107, BU Apps in Q207 and so on.
I've been trying to get a formula that will calculate a median for base salary if it equals two criteria:
Grade: 15-8 (in column C)
Department: E or S (in column O)
the base salaries are in column I
I put the E's in Column A, S's in Column B, and the Grades in Column C of the worksheet where i need the median.
I tried the following: =MEDIAN(IF((data!$O$3:$O$200=$B10)+(data!$C$3:$C$200=$C10),data!$I$3:$I$200))
because it is such a large data set, I don't want to go in manually and calculate every median for the specific sets.
Is there a way?
I'm trying to pull in the Median based on two different criteria, I've attempted to do so with the following formula:
{=MEDIAN(IF((($J$5:$J$2951=$AO3000)/($AP$5:$AP$2951=$AO$2998))*($AL$5:$AL$2951""),$AL$5:$AL$2951,""))}
This is only returning an error value, is there a discrepancy in this formula?
I am trying to find the median for a huge amount of data, so I have cut it down to just an example size. I have uploaded a copy of the example file.
I have three price ranges that I have to find the median for:
Under $5MM
$5 MM - $25 MM
$26 MM - $56 MM
I need to find the median for each price range for Signed units and Sold units. I also have to find a median within a date range (e.g. within the last six months) that includes the previous criteria.
For the first formula, I have tried using the following formulas:
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">="&0,IF($F$14:$F$34,"<="&5000000,$F$14:$F$34))))
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">=0",IF($F$14:$F$34,"<=5000000",$F$14:$F$34))))
(I remembered to do "CTL + SHIFT and ENTER" to make it an array.)
For the second formula, with the date range, I am able to find the total for the last six months, but not with a price range included.
The formula that I am using that works for the median of units Signed within the last six months is:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$E$34)))
However, once I try to find the price range, it does not work:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$EIF$34,IF($E$14:$E$34,">=0",IF($E$14:$E$34,"<=5000000",$E$14:$E$34)))))
We are trying to find the median of a large set of numbers to calculate the median income in 2010. For an example we have 8,379k people with $2500 average income, 9,783k with $7500 average income and so on. How can I calculate the median average income of such a large amount of entries?
View 8 Replies View RelatedI have long series of data in 8 columns (B, F, J, N, R, V, Z, AD) starting at row 5 down to row 86404. I want to find the total median for each row, where a condition is met for that row. The condition is if number>10 and the number is located in row 3 for each column (i.e., B3 for column B). So, if B3, J3, R3 are all >10, then I want to find the median for all the numbers in the columns B,J,R.
I assume there is an array formula that could do this? I've tried a few solutions with no luck.
how to find the median for a list of numbers using =median(). But what if I have a list of prices for different types of say cars.
Car Type Price
A $10000
B $15000
A $20000
C $30000
Is there a macro that will return
Car Type Median
A $
B $
C $
In a table 1 column are dates and another are machine parts. The dates are when that machine part broke last and a lot of the machine parts are repeated. Something like this
Column 1......Column 2
11/19/2010..Part 1
4/13/2010.....Part 1
9/13/2010.....Part 3
1/20/2010.....Part 2
10/11/2008...Part 2
2/1/2011.......Part 3
I'd like to find the last date the part broke. so the newest date. It would be nice if excel had a =maxifs() button. Can this be done without using a sub?
I have 2 rows of data
1. title
2. value
eg
Row 1: Title1, Title2, Title1, Title4, Title2, Title1
Row 2: 2 , 3 , 0 , 1 , 2 , 6
In the above I am looking for the average of Title1, where the value is greater than 0. There are 3 occurances of Title1, but only 2 have values. The answer i am after is Sum is 8, average is 4 (ie 8/2 and not 8/3)
I have a very large database of quotes. I have created a user interface with several textbox inputs, combobox inputs, and checkboxes. When the commandbutton is pressed I need a list of quote numbers to be generated based on the criteria the user input. I found an example program from here that is for ADVANCED EXCEL FIND. It only uses combo boxs and goes to those rows on datasheet. I have text input and checkbox inputs as well and I don't want it to take the user to the rows, I want just the quote numbers from the rows to be sent back to a textbox. I also read over one based on filtering data in a listbox.
This is my first program in VB, but I did quite a bit in C++ before. I can pretty much understand what all the coding says, I just am overwhelmed with it being so large and not sure how to put it all together.
have two worksheets. sheet1 has order information on it with orders, dates, customer names. sheet2 has customer name list. How can I (via vba) search through the order sheet and find the most recent order date for each customer in the customer name list. post that most recent date next to the customer name on sheet2.
View 4 Replies View Relatedhere is a sample of the data
150
21
352
422
53
69
755
852
1224
13268
119
242
30
444
543
67.................
I know if I use dmax for only where first column equals 13 I get 460 but how do I get the second highest value for only those rows that have 13 in the first column (expect the answer to be 268). Then I want to do the same for 3rd, 4th highest etc.
I know large does it for one column and not only when the first column matches a designated criteria.
Problem:
Range A2:C10 contains the login and logout times of various ID's.
Each ID could log in and out a number of times a day.
How could we find the first time a specific ID logged in and the last time that same ID logged out?
Solution:
For each of the ID's in range A2:A10, enter two Array Formulas.
To find the first login time (Column B) enter the following formula:
{=1/MAX((A14=$A$2:$A$10)*($B$2:$B$10
To find the last logout time (Column C) enter the following formula:
{=MAX(($A$2:$A$10=A14)*($C$2:$C$10))}
ID______Login Time______Logout Time
1 ______02:40___________03:10
2 ______00:15___________03:20
1 ______06:20___________09:30
3 ______09:14___________11:05
4 ______11:00___________19:30
2 ______04:05___________06:55
3 ______12:08___________17:17
1 ______10:00___________16:20
2 ______08:12___________12:33
ID______First Login Time______Last Logout Time
1 ______2:40__________________16:20
2 ______0:15__________________12:33
3 ______9:14__________________17:17
4 ______11:00_________________19:30
I can get the result. It shows #num! in cell F2
I need to be able to find a value in another sheet based on 2 criteria
The criteria is a number from a column on my first sheet where the results will reside, the second criteria is based on a fiscal year (calculated based on the year of the current year).
The formula I use is as follow:
=LOOKUP(BA2,Budgets!B:B,Budgets!I:I)
and this is what I use to get the column:
=+INDEX(Budgets!B11:B200,MATCH(Budgets!B11:B200,Budgets!B11:AB200,0),3) getting #N/A here
and I use this too:
=MATCH(IF(MONTH(TODAY()) < 7,YEAR(TODAY()),YEAR(TODAY())+1),Budgets!E:Q) getting #N/A here too
If i keep it like that no problems but I will need to change the criteria 2 every new fiscal year.....
What I need is to replace the criteria 2 with something that will find the proper column wher the data is the fiscal year is listed on E11:Q11..
I have tried index and match and quite frankly, I never made it work, always getting an error.
I have to find the average of a set of data with a lot of different criteria. I think an array formula would work wonderfully but I just cannot seem to get it.
My example: I have a large set of data that I must get multiple averages from that fall within differing sets of criteria. For my example we'll just say that I have to find the average of the number column that occurs on or after Jan-12 (January 2012) and is type "p1" or one that has no date and is type "p1" and to not average numbers that are equal to 0. So logically it would look like this: If date
I need to look at column B find anything that Starts with BBX (ie; BBX124343, BBX1348383 ) and move it at the same location only to column A
I am trying to delete columns or clear their contents after I meet a certain criteria in row 4. For example: I have one " Total" in row 4 that can be in any column. I wanna be able to delete whatever comes after "Total" in any row or column. Is there a macro that can do that?.......
View 2 Replies View RelatedI'm trying to find a way that I could get the MAX value in a group of cells depending on a critieria. The situation is that I have a list of numbers and a list of dates parallel to it. I would like to find the MAX for, say, the numbers corresponding to the month of June. I would like to be able to change the month and get the MAX for each month on request.
Eg.
18-MAY-2007 600
01-JUN-2007 500
02-JUN-2007 400
28-JUN-2007 600
12-JUL-2007 700
17-JUL-2007 200
I need formula that will give me "600" if the month I want is June. Ideally I would not want to have to filter the data, so SUBTOTAL would probably not work for me.
The matrix:
Col A Col B Col C
2012-11-08 07:26:16Check-InJohn
2012-11-08 13:23:58Check-OutJohn
2012-11-08 13:24:01Check-InJohn
The goal:
Since i have a given:
1. Name(which exists in column C)
2. Date (which exists in column A - formated has (AAAA-MM-SS HH:MM:SS)
3. Event (which exists in column B)
4. Hour*
I want to know the nearest hour that matches all criterias.
In the example on top, if i give:
John, 2012-11-08, Check-In, 14:00:00
I want the result: 13:24:01
If, for example, the date doesn't exist, the result could be a simple error message.
What I am attempting to do is find the MIN value in Column C where values in Column A are equal.
The data would look like this
A B C D (D:D is where the "MIN" Formula will be)
Scope1 NameA $100
Scope1 NameB $145
Scope1 NameC $115 $100 (I want the min value to show up here)
- (this would trigger a break between scopes, and provide a conditional format separator)
Scope2 NameE $450
Scope2 NameG $345
Scope2 NameX $415 $345
-
So every time I put a "-" I would like the MIN formula to trigger in (Row#-1,D)
I am trying to average PT ScoreS from multiple groups based off of different criteria. Please see below tables:
KEY:
MS = Class CO = Company PLT = Platoon SQD = Squad
A/1 = Alpha Company, 1st Platoon (Example of Company and Platoon PT Score Average)
A/1/2 = Alpha Comapny, 1st Platoon, 1st Squad (Example of Company, Platoon and Squad PT Score Average)
F14 is the average of all PT Scores
A
B
C
D
E
F
1
NAME
MS
CO
PLT
SQD
PT SCORE
[Code] ....
I need to find the equations of different groups of PT Scores. I want the averages/equations to go below the different groups.
A
B
C
D
E
F
G
H
I
J
K
1
MS 1
MS 2
A
A/1
A/2
A/1/1
A/1/2
A/1/3
A/2/1
A/2/2
A/2/3
[Code] .......
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
I have a main soure data which consist of row & column information. What i want to do is search the data from the source data into my result data as per the attachment file. Example: I want to information of Jan & banana from the main source file to appear in the XXXX
Result data(criteria base on Month & type)
JanApril
BananaXXXX
Apple
Orange
I am trying to find the top two values per group based on multiple criteria. The list I'm working with is not sorted and would be better for it to not have to be sorted as on-the-fly sorts will likely often occur from the raw data and I wouldn't want that to mess up the results I'm looking for here.
As an Example, here's what I'm trying to do:
Make Model Rating
Ford Bronco 64
Chevy Corvette 94
Dodge Intrepid 83
Chevy Chevette 34
Dodge Viper 72
Ford Escape 21
Ford Expidition 53
Chevy Impala 67
Ford Fairmont 11
Dodge Dart 33
I'm trying to restructure a list of files at work into a format that makes some sort of sense and can be filtered into useful information.
Part of what I need to do, is match up all the drawing numbers that a certain project references. The numbers are formatted like "####A##" ex. 1234A01,1234A02,5678A01, etc. The cells that I need to extract drawing numbers from contain some description or other text (not just the drawing number) so I need to extract the drawing number from that cells value. (Ex. I need to get the drawing number 1234A01 from a cell whose value is "blah blah 1234A01 blah blah blah")
I was thinking I could just search the string for "####A##" but I'm not really sure how....I tried instr, but I think its searching for the literal value of "####A##" rather than treating the # characters as wildcards...
I tried:
Code:
if rngNames.Cells(intx, 2).Value Like ("*####A##*") then
set intStart = instr(1,rngnames.Cells(intx,2).value,"####A##")
'....
end if
but intStart remains 0, so this method is not working...
Any quick way to extract data from a table. I need to extract a value from a column that meets criteria from two different columns. I thought I could get this to work with vlookup, but have had no success. Sample data below in table 1 and I would like to get my data into table 2.
elevation
type
grade
percent
weight
5000
5000
5000
5020
[Code] ..........
i have with noting the most recent date of a test and also the one prior to the most recent dependant on location and test type. I require most recent and previous test info to enable a comparrison to be made. All other dates are not required but need to be kept as historical data and can't be deleted.
Is there anyway i could get column E to auto populate and amend itself as more test dates and locations are added to the list?
I've read the how to for finding the nth occurrence using index/match but the example given does not really help solve my issue. The file I've attached is a condensed version of the actual file, which has more columns but I deleted all but the necessary ones for clarity. What I am trying to accomplish:
On sheet1 there are three columns, Business, Amount, and Closing Date.
Not all the business names have a closing date and the spreadsheet is sorted alphabetically by business name, so sorting by closing date, and using the method used in the topic " find the nth occurrence in excel", is not an option.
On sheet2, I would like to see ALL the business names that have a closing date in the respective month, as opposed to just the first. Then to the right of the business names I have the sum of all the amounts in that month, but I figured out how to get that one already.