Format All Sheets The Same
Dec 28, 2009
On a daily basis I receive a workbook with one single spreadsheet. I then break it into multiple tabs (~ 40 to 50 different sheets). I am trying to apply the same formating as my data sheet (same column width, same row width, landscape for printing, same margins for printing, same headers/footers, etc).
I was originally going to use the macro recorder but ran into the issue that the sheet names are different each day. I tried the following bit of code as a start but keep getting an error.
View 7 Replies
ADVERTISEMENT
Jan 22, 2010
I have 14 worksheets in a workbook.
All sheets are identical in that they have the same headings within the same range.
I want to apply formatting (bold some text, apply borders, center, etc.), but to all the sheets at once. I know I can do this with a simple loop, but I was wondering if there is a more efficient way of doing it.
I've been playing with
sheet( array(sheet1.name, sheet2.name))
I don't think I have correct syntax or use using the the above.
I tried coding what I would do if I was performing this manually, which is to select all the sheets and apply the formatting to sheet1. Then all the sheets would have the formatting.
View 9 Replies
View Related
Nov 28, 2008
I'm writing a bit of a code that will re-format all sheets in spreadsheet except the three named. I keep on getting compile errors whatever I do. It's driven me mad.
View 3 Replies
View Related
Dec 13, 2011
I am trying to use VBA to select all sheets and then format
Wrap Text
Freeze at A2
Column Widths
I tried the following code but it is just formatting one sheet.
Sheets(Array("New", "Closed", "Open", "Open_Beg_Month", "Closed WAD")).Select
Range("A2").Select
ActiveWindow.FreezePanes = True
View 2 Replies
View Related
Jun 13, 2007
I'm trying to write a macro to select all the Sheets in a Workbook, and set some properties [Auto ColumnWidths, Landscape, and Fit to 1 page wide] for all of them.
I don't know the names of the sheets, nor how many there will be - this part is tagged on the end of a long macro that creates new files and pastes various data into them. The code below only seems to work on the Active sheet - not any of the others selected. Curiously, I can set a specific column width for all sheets, but not Auto Widths.
With ActiveWorkbook
Sheets.Select
With ActiveSheet.PageSetup
.PrintTitleRows = "$1:$1"
.Orientation = xlLandscape
.Zoom = False
.FitToPagesWide = 1
.FitToPagesTall = False
End With
End With
Sheets.Select
ActiveWindow.Zoom = 80 ' This line works!
Cells.Select
Selection.RowHeight = 13.5
Selection.EntireColumn.AutoFit
Columns("C:C").Select
Selection.ColumnWidth = 34 ' This line works
Range("A1").Select
View 2 Replies
View Related
Jun 21, 2012
Currently, I have 65536 rows of data per sheet in an excel file. I have a total of 8 sheets. I need to combine all these sheets into one csv file. As my company uses excel 2003, I can't consolidate all sheets into 1 sheet before saving as CSV format as it will exceed the number of rows available in excel 2003.
However, the number of rows and number of sheets in the excel file will change monthly, and I need to consolidate the excel file accordingly.
I am wondering if I could save a new workbook as csv format first before copy and paste all data into that csv file.
Also, all the 8 tabs have the same header. I only need to copy the header on the first tab, and for the sequence tab, I will only need to copy row 2 onwards.
I have recorded a macro based on a sample data.
Sub Macro1()
'
' Macro1 Macro
'
'
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and Settingse31425My DocumentsBook1.csv", _
FileFormat:=xlCSV, CreateBackup:=False
[Code] .......
View 1 Replies
View Related
Dec 2, 2013
We have 3 PCs, all running MS Office 2013. On 1 of these machines, it is doing strange things with formatting. If you open a document or try to paste anything into certain documents, it decides everything is currency format and assigns all sorts of wrong formatting to the entire sheet, or the entire document. There may be some cells in the doc that are indeed currency, but only a small proprtion. If I open a new, fresh document and paste into that document, it does not do this, it seems to work normally, only applying currency formatting where it might be applicable. On some larger docs that have this issue, no matter what I do, it just continues to apply these strange settings.
View 2 Replies
View Related
Jan 12, 2014
I have a workbook that contains something like 50 worksheets and they all contain data with the same columns, for example column A is Project, column B is Project Name, etc. I need to convert data in each worksheet into an Excel Table. There has to be an easier way than manually converting each worksheet into a Table. However, when I group all of the sheets, the option to Insert a Table is not available even though the data starts in the same row and contains the same number of active columns in each worksheet. Is there an easier waty to insert a table in all of the worksheet simultaneously?
View 2 Replies
View Related
May 1, 2008
I've seen a few threads on here about this issue but none of them do quite what I am looking for. I'd like for a single page "report" to be created when a user presses a button (which runs a macro, of course) The macro should be able to run through certain named sheets (even if hidden) and if a cell in any row is red within a sheet then the entire row or rows that meet the criteria should be copied and pasted into the Report sheet.
On the report sheet, for each sheet that has had rows that were copied, I'd like to have the name of the sheet as the header above the pasted rows so that the user knows which sheet the data came from. Any sheet that doesn't have red cells would be excluded from the report. I've attached a sample file but had to limit the number of sheets because of Orgrid's file size limit. Hopefully, you'll see what I am getting at here.
View 8 Replies
View Related
Feb 28, 2014
I am trying to format all cells on all sheets (hidden or otherwise) as "Locked" so when the sheets are protected the user can't see the formulas. This macro individually selects every sheet in the book and applys the formatting. Is there a way to modify this code to accomplish the same thing without having it actually select every sheet? The only reason it is an issue is that after running the macro you end up on the last sheet in the book.
View 7 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Jun 7, 2006
I have a column of cells with values - 0.2%, 0.32%, 0.22, 0.5 etc. The cells with % symbol are in ' Percentage, 2 decimal' format while the plain numbers are in 'General' format i.e. column contains cells in either of these formats. I need a macro where I can specify the column and it will select the cells with the % format, convert it to 'General' and multiply the result by 100 eg. 0.2% converted to 'General' becomes 0.002. When multiplied by 100, result is 0.2 i.e. is displayed without the % symbol.
View 7 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
Oct 15, 2009
How can I format cells to contain Minutes, Seconds and Hundredths of seconds to be used in calculations eg 1.24.99 means 1 minute and 24.99 seconds. Example calculation is: 1.24.99 - 1.24.90 =0.0.09
View 2 Replies
View Related
Feb 11, 2009
I need to format some climatic data from a weather station into a desired format. There are a lot of cut&paste and transposing involved. I think it will be easy but tedious for anyone trained in VB to write a macro but unfortunately I am not. I've tried recording a macro but it turns out that it is not general enough to deal with all the spreadsheets that I've got.
I've attached a spreadsheet which shows the original format (in sheet 1) and the desired format (in sheet 2). To briefly describe, I only need the temperature data for 8am and 2pm, the rest of the information in sheet 1 is useless to me.
View 2 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Aug 1, 2013
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
View 3 Replies
View Related
Dec 19, 2006
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
View 9 Replies
View Related
Feb 3, 2007
I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies
View Related
Jun 12, 2008
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies
View Related
May 1, 2014
I have around 30k data. which is in invalid format.
Ex: 12987654321vinay kk 876543219
32567456789 kkccjhg fo 345678921
I want to convert this into correct format as below with start letter from
MOD, 987654321,, vinay, kk,87654219
MOD,567456789, , kkccjhg, fo,345678921
I want to know which are formulas I have to use to get this info in correct format.
View 1 Replies
View Related
Mar 1, 2007
In order to export an excel table into another program I first need to save the excel file as .txt. The .txt file can then be imported by the other program.
First I however need to make excel understand that the value should be a text and not a value. I therefore format the number as text (0000150235) by adding "0000150235". After saving the file as .txt the format changes from "0000150235" to """0000150235""". I do however need the format in the .txt file to be "0000150235". Can anyone tell me how I can save "0000150235" as .txt and get the value "0000150235" in the .txt file.
View 14 Replies
View Related
Jan 24, 2010
I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
View 10 Replies
View Related
Apr 12, 2012
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
View Related
Oct 17, 2012
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies
View Related
May 23, 2014
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
View 9 Replies
View Related
Jan 10, 2007
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
View 9 Replies
View Related
Jun 27, 2007
I need in changing the format of sheet2 to exactly like the following image below.
*there are some codes in sheet2 which I think is the place to change the format.
View 6 Replies
View Related
Mar 19, 2008
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
View 5 Replies
View Related
Jan 23, 2009
I have a spreadsheet which needs to display currency in the correct format dependant upon whether a contract is in English or German Law. Excel defaults currency format as €310,000.00 however in German this needs to be €310.000,00 i.e. with the decimal point and comma in opposite positions. Does anyone know what expression I can use to format it as the latter?
View 2 Replies
View Related
