I have a column with numbers ranging from -5 to 250. I want to write a formula to correct the numbers in the next column. If the number is less than 0, I want to replace it with 0,if the number is greater than 150 i want to replace it with 150 and if the number is in the 0-150 range it should be kept the same. Is there a way to use inequalities in a formula to do this??
View 2 RepliesI'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies View RelatedI want to create a Macro that uses IF statements to enter the CORRECT VALUE into COLUMN “Q” in the ACTIVE WORKSHEET. I am providing an example of what the data set looks like at the very bottom of this post. I want to use a Macro as oppose to Formula in the worksheet because I want to turn the Macro into an Excel Add-In.
I want the Macro to do the following THREE THINGS:
1. IF the Value in COLUMN L is “0” THEN enter “n/a” into COLUMN “Q”
2. IF the Value in COLUMN L is “2” THEN enter “n/a” into COLUMN “Q”
3. IF the Value in COLUMN L is “1” THEN use a formula that looks like this:
= O8 + ( ( O8 / P8 ) * (First SUM the HOURS in COLUMN O for all the ROWS that have the SAME VALUES in COLUMN C and H and a “2” in COLUMN L and then MULTIPLY that Result against those rows with a “1” in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours). The RESULT of the FORMULA would be entered into COLUMN “Q”. Once you look at the example at the bottom of this post it will definitely start making sense. I highlighted rows 8 – 11 for you in red in the data set at the bottom of this post just to center the attention on the rows I am talking about.
Here is an example of how the formula will work:
I will use ROW 8 from the data set below as an example. From the dataset I know CELL O8 equals 10 and CELL P8 equals 76. Now I will SUM the HOURS in COLUMN O ROWS 10 and 11 for ALL ROWS that have the SAME VALUES in COLUMN C and H in this case the values are “Times” and “PM” and contain a “2” in COLUMN L which happens to equal 3, then that 3 should only apply to those rows with a “1” in COLUMN L whose COLUMNS C and H values match up exactly with those of the Summed Hours. So now I plug that into the formula: =10+((10/76)*(3)) and MY RESULT which will go into COLUMN “Q” IS 10.395.
Here the DATA SET:
Col A Col B Col C Col D Col E Col F Col G Col H Col I Col J Col K Col L Col M Col N Col O Col P Col Q Col R Col S Col T
Row 1 B ID Name Org Div T Number Model Make S Function E Function Type Description P ID OG Hours Sum EA P Hours Sum P S Hours EQ
This is what is happening in Column Q Explanation of Formula
Row 2
Times
Cont
2
28 28 n/a
n/a If formula populates Column Q cells with "n/a" if Column L cells contain a "0" or "2".
Row 3
Times
Cont
1
404 1194 413.4740369
O3+((O3/P3)*28) You get the Sum "28" by adding all the "P Hours" in Column O that match these 3 values:
1. The "Org" value of "Times" in Column C
2. The "S Function" value "Cont" in Column H
3. The "P ID" value "2" in Column L
[Code] ...........
I am setting up a spreadsheet with two columns. The first column will contain a persons name the second column will contain four numbers.
Name Numbers
Joe 1,3,12,24
John 4,12,23,24
Jill 6,14,19,26
I need to be able to search to find the following: the correct sequence of numbers e.g. if 1,3,12,24 were pulled out then that search is easy. If I was looking for someone who had the numbers 1,12,24 then I have a problem. I was thinking about putting the four numbers in to four separate columns but my Excel knowledge is poor.
I have two worksheets in one document. On sheet 'M_Admission' there are numbers for each week. can those numbers be automatically copied to the correct cell on sheet 2 'M_Actual' See the attached Excel worksheet to see what I mean. (Excel 2002)
View 3 Replies View RelatedI have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
I would like a formula for cells B1, B2, & B3 that will give me the sum of the numbers in Column B which are next to their corresponding plan in Column A. The attachment is a sample of a sheet that will be having approx 500 rows to work with. I have tried using the "Sumif" funtion, but I can't seem to get it to work correctly.
View 4 Replies View RelatedI have two questions:
1. Is there a way cells with formulas cannot be tampered even if they are not locked? So when I enter a data on a cell with formula, the formula won't be erased? The sample below shows that C1 and C2 has formulas but let's say I enter a value on C1, the formula should still stay? Is this possible?
A B C
1 5 10 =SUM(A1:B10)
2 2 4 =SUM(A2:B2)
2. Let's say I have a total of 125 (A1) and I need to get the answer (B1) where it has 5 with No. 3 on top (subscript) of 5? How to create a formula for this (I hope I make sense)?
I would like to be able to search through a column of numbers (say A1=2, A2=4, A3=1, A4=7, A5=5, A6=2, A7=3) and for the formula to list all the possible combinations of cells that add up to a particular number, in this case we will say 7 (i.e. A4 A1+A2+A3 A2+A3+A6 A2+A7 etc.).
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
I have three columns of values that are in no particular order that need to be sorted in ascending order in another column.
View 9 Replies View RelatedHow can I correct this Time formula which says in the Tag that it produces a
negative Result and hence displays in cell as ####
=(INDEX($A18:$A33,MATCH(MIN(C18:C33),C18:C33,0)))-(60/1440)
What I am doing is selecting the field in A which equates to the lowest
value in C (C= hourly sales), then I am subtracting 60 mins from the value
selected in A. This in effect will give me my closing Times i.e. find the
cell with Zero Sales then subtract 1 hour to find what must be the closing
time (assuming of course that there is at least ?1 of sales per hour while
open).
My cells in A are formatted as h:mm AM/PM, as is the format in the formula
cell
Need a formula to calculate a absolute total from a column of totals.
I thought this was simple, but the formula I made didn't work.
I have a set of costs in column c (more that shown below) that have an indicator - for example 0 or 30 (there are more).
I need to populate rows 18 and 19 with the sumif - i have other tables where it is a straighforward sumif as the periods align, here though I need to check that the periods (rows 4 & 16) are checked and then the right data entered underneath.
I can't find a way to combine the sumif, with an if statement checking that the period is correct too? ...
I have a colum full of durations in 00:00:00 format. I need a forumla to look at these durations, count the seconds and then multiply those seconds by a predfined rate. In effect giving me a second colum full of costs.
I have attached a screenshot f the data, and the rate should be 0.0073p (.73 of a penny)
correct formula related to dates;
Assume cell A1 contains a date in DD-MMM-YYYY format. I would like to have a formula that looks in A1 and compares to the current date (TODAYS Date) and if the value in A1 is todays date or greater return "YES" and if not return "No".
Cell A3 on my SHEET1 has the following formula =DATE(YEAR(C1),MONTH(C1) + 1,DAY(C1). It goes on like this for the next 12 months (+2, +3, +4....).
Column B on my SHEET2 has One of the five product codes (A, B, C, D, E) and Column D on my SHEET2 has manually entered dates
I created the following condition for each product code under each month in SHEET1
=IF(MONTH(Sheet2!$D$1:$D$39)=MONTH(Sheet1!$A$3),COUNTIF(SHEET2!$B$2:$B$39,"=A"),"")
The formula only works for two product codes (A and B), and then yields blank cells.
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4
C68=14.9-15.1=-0.2
D68=11.3-10.2=1.1 but it shows 1.0
I have attached the sheet also.
Sheet 1.xlsx
I am using this formula for long now
=SUMPRODUCT(('[Diesel Statement.xlsx]Nov 12'!$C$2:$C$251=$H$1)*'[Diesel Statement.xlsx]Nov 12'!$G$2:$G$251)
every month i just add a new sheet and change the month name in the formula to that eg
I changed it to
=SUMPRODUCT(('[Diesel Statement.xlsx]Dec 12'!$C$2:$C$251=$H$1)*'[Diesel Statement.xlsx]Dec 12'!$G$2:$G$251)
but now it is not calculating the answer is coming as #value!.
Then I tried to add up by
=VLOOKUP($H$1,'[Diesel Statement.xlsx]Dec 12'!$C$2:$G$215,5,TRUE)
but it does not add all the entries only one entry is shown.
I want the total of the column G. looking up for values in C = H1 value
I have a fomula field in row 67 and 68 .Row 67 calculates the average and row 68 calculates the improvement i.e. average(row 68)- last row inserted(row 67). The values for improvements are not showing correct value. C68 seems to give correct value but B68 and D68 is giving wrong value.
B68=4.8-4.5 =0.3 but it shows 0.4
C68=14.9-15.1=-0.2
D68=11.3-10.2=1.1 but it shows 1.0
I have attached the sheet also.
Sheet 1.xlsx - Speedy Share - upload your files here
Excel 2003 SP2
--------------
I have been programmatically setting the formulae in a worksheet. I have various formulae:
Example 1 - =COUNTIF(Data!M$6:M$9871,3)/$E$4
The cell is formatted Percentage, 2 decimal places.
Using the formula evaluator the value returned is 56.80%
The cell displays 56.80%, all is good!
Example 2 - =SUM(IF(Data!$J$6:$J$9871=$D8,IF(Data!$M$6:$M$9871=3,1,0)))/$E$8
The cell is formatted Percentage, 2 decimal places.
Using the formula evaluator the value returned is 53.37%
The cell displays 0.00% !?!
So yesterday I created a thread [URL] ..... that would clear a specific content if a date (or rather a day) matched the criteria.
Today I'm continuing with that document and need to sum the columns if the date in a row is the correct month and year.
Ex. Row 1 contains the date "yyyy-mm-dd" and row 2-5 contains empty cells or the value x. The x values are all random placed.
So, I want to sum all the "x" for February 2014.
I'd rather use a formula here than a macro/VBA-code but anything will do. I have tried myself with =sumifs and =sumproduct but with no success.
See attached file for example and for my =sumproduct formula.
Excelforumexample1.xlsx
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
View 8 Replies View RelatedHow to get correct value using vlookup formula in duplicate look up values.
Here i mentioned a eg;
VlookUp_DuplicateValue.JPG
I have a what I believe to be a consistant formula on lines S12-S18 for gathering the sumproducts for dates on column O. Only problem is that the sumproduct formula is not working on line S18 correctly. I keep looking it over and I can't figure out why it is not returning the correct amount for that cell.
Here is the formula I am using:
=SUMPRODUCT((TEXT($O$12:$O$500,"dddd")=R18)*1)
Please see attached line S18 for the error I am getting.
Attached you will find the spreadshhet in question. If you click on the click here button input the following info:
8.0
3508949
80
0
0
25
the sheet will auto populate all numbers. this part is working properly. MY issue is if you look at the Bad Debt number, the correct response should in cell f21 should be $636.46 because in order to hit the next level of pay, you must at least hit $3,424,082.00. I can not figure out how to get the correct formula that will put the right pay out. Basically in order to hit a certain level of payout you must hit that next number, even if you are a $1 higher you can not get the pay out. So for example if your bad debt is $3,424,083 you would be paid out at 100%, not 120%.
Users copy and paste source data from a report into worksheet 1 each month. Data from last month is deleted and data for the current month copied into worksheet 1.
I am trying to write a formula within worksheet 1 to check that data for the current reporting period only is in worksheet 1. For example all data from last month's reporting period has been removed and the only data in worksheet 1 is the current reporting period.
Reporting period is shown in two columns Year and Period number (1 to 12).
I have an worksheet that refreshes every day from a .csv report. I would like to be able to have a comments column at the end that users type in. The problem is how to keep the comment next to the row it was on before the refresh.
When it refreshes there will be new rows, rows that are no longer there and all in a different order.
There is an Order Number column that can be used as an ID column.
B. start time C. end time D. Total time (military time)
Example: 2300 - 0300 = 4 hrs worked.
=IF(C19-B19>0,C19-B19,1+C19-B19)
I have a row for every date the hors is worked.
I cant seem to get the total hours to calculate correctly at the bottom of column D for a total hours worked in a particular pay period. It calculates a total up to 24hrs then reverts to zero. I have tried [h]:mm =SUM(XX:XX) and just about everything else I can think of and cant get it to calculate a correct total over 24 hrs.