Military Time Wont Total Correct In A Column
Aug 20, 2008
B. start time C. end time D. Total time (military time)
Example: 2300 - 0300 = 4 hrs worked.
=IF(C19-B19>0,C19-B19,1+C19-B19)
I have a row for every date the hors is worked.
I cant seem to get the total hours to calculate correctly at the bottom of column D for a total hours worked in a particular pay period. It calculates a total up to 24hrs then reverts to zero. I have tried [h]:mm =SUM(XX:XX) and just about everything else I can think of and cant get it to calculate a correct total over 24 hrs.
View 5 Replies
ADVERTISEMENT
Jul 15, 2014
I have 4 distinct columns.
Adm Date Adm Time Trans Date Trans Time
1/16/2014 937 1/16/2014 1045
1/1/2014 121 1/1/2014 121
1/14/2014 800 1/11/2014 735
1/30/2014 100 1/30/2014 205
1/13/2014 800 1/12/2014 1202
I would like to calculate the difference (# hours spanned from the dates shown). Unfortunately when we transfer the data the COLON is dropped from MILITARY TIME so I am having problems in the calculation. This is also made more difficult as some of the calculates span over two dates.
View 5 Replies
View Related
Jun 21, 2007
I need a simple formula to convert standard time (1:05pm) into military time (13:08).
I've read through several posts, but all I've found is reformatting or time subtraction type information. The reformating works to an extent, it gives me the hours in military but the minutes stay standard.
Basicly, all I need is:
Cell A1 = 1:05 p
Cell B1 = formula that shows/converts 1:05 p as 13:08
View 6 Replies
View Related
Jul 2, 2007
I have a column of numbers formatted as general. The data represents military time. When I try to change the format to time, the output is 0:00. How do I convert the existing data to time data IN THE SAME cell the existing data is already in? Is this possible? I have 26,000 lines of data I have to apply this to.
View 9 Replies
View Related
Oct 28, 2009
I have four columns. In the first one I want to keep my START time (in format of military time), in the second column I have STOP time, in the THIRD column I have TIME USED in other words it is a DIFFERENCE between STOP and START and I used this formula for that: =B2-A2 and it works.
Now in the FOURTH column I wish to have the TOTAL TIME added from the THIRD column and this where the problems starts. I used this formula =SUM(C2:C500) and doesn't work correctly.
Let's say I have the following data: ....
View 9 Replies
View Related
Feb 22, 2007
Looking for a formula that will convert military time into hours and total the hours in each row going accross up to 31 days. Only problem is the word 'OFF' is included on various days in each row.
View 9 Replies
View Related
Feb 28, 2007
I'm trying to calcuate the time difference using military time.
For example:
A1 has 0400 A2 has 0430 A3 SHOULD be :30
B1 has 1500 B2 has 1715 B3 SHOULD be 2:15
Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
View 9 Replies
View Related
Jul 11, 2007
How I could convert military time to standard time? The format is HourMinuteSeconds.
For example, in column C, I have something like
92412 ---> So this is 9:24:12 AM
152209 ---> So this is 3:22:09 PM
I just want to change the format from military time to standard time so that I can do a sort.
View 9 Replies
View Related
Jun 17, 2014
I have written a formula to convert military time to 12-hour format.
View 3 Replies
View Related
Jan 13, 2014
I am parsing a cell that contains the date and time; "2013-05-20 13:20:39" and it reads this way in the active cell. In the formula bar it reads; "2013-05-20 1:20:39 PM" and looks that same way when I use text to columns. What do I do to keep the time in military time (i.e. the way it appears in the cell) when I parse the cell contents?
View 5 Replies
View Related
Jul 22, 2013
In A1, I've got a time for an event expressed in military time without colons, like 1130.
In B1, I've got two more times expressed the same way, like 1230-1300. These are the time the event was actually began and ended.
I've separated these two times into four different columns, the first two (C1 and D1) containing the raw numbers 1230 and 1330, and the second two (E1 and F1) containing those numbers formatted as times (12:30 and 13:00) via the TEXT function =TEXT(C1,"00:00")
Getting the difference between these two times (expressed in minutes) is not difficult. What is proving to be difficult (however simple it seems) is checking to see if C1 (time event began) is within an hour of A1 (time event was scheduled.) I was able to get this to work with times not involving 0000 or having, say, 0130 as an event time and 2300 as the time the event was started, but those two cases (switching 0000 to 2400, and moving between "days") is causing a hangup. Checking if A1
View 1 Replies
View Related
Sep 14, 2007
if someone called me at 4:55pm and ended the call at 5:10pm, the whole call lasted 15 minutes. So, I want to show on excel that the call lasted 5 minutes in the 16th hour of the day (4:55pm) and 10 minutes in the 17th hour of the day (5:10pm), for a total of 15 minutes.
View 3 Replies
View Related
Apr 12, 2014
I am trying to find a way to have excel recognize text data input as date/time.
[Code] .....
Where 02 Is the Date, 2020 is the time (military) Z is Zulu/GMT, MAR is Month and 14 is Year. I believe excel recognizes
[Code] .....
But I have a spreadsheet (on a confidential system) with thousands of entries that I need to convert. Also, the people I have working for me are not remotely. I reject the idea of entering data that way.
I am also trying to keep the display the same format: ddhhmm"Z" MMM yy
View 9 Replies
View Related
Nov 14, 2008
Need a ormula that will calculate various lengths of time within a column.
For example: I would like to be able to add
02:43 (2 minutes 43 seconds) plus
01:10 (1 minute 10 seconds) plus
05:15 (5 minutes and 15 seconds)
..and accurately arrive at the sum of
09:08 (9 minutes 8 seconds)
Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).
View 2 Replies
View Related
May 24, 2012
I'm trying to add the total product sold by a group of sales person for example : Chad + Javier. My actual worksheet includes 600 rows of salespeople and 20 rows of product, i'm using this simple example to get the message across.
I was using =sum(sumif(A1:A9,"Chad',D1:D9),sumif(A1:A9,"Javier",D1:D9)), the formula should have given 91, but instead is calculating 113...
Salers PersonProduct AProduct BProduct C
Chad567
Chad567
Chad567
Chad567
[Code] .....
View 1 Replies
View Related
Jul 25, 2014
I have a row of cells, and some of which are displaying time, but in an incorrect format.
for example 15:20 is showing in a cell as 3.2
How can I create a new cells that basically converts 3.2 into 24 hr hh:mm ....e.g. 15:20?
If I got to use the format cells option, and hh:mm, it changes the cell to the completely wrong time (i.e 04:48) ?
p.s. I should state that "some" of the cells are kind of showing the correct time, albeit with a decimal instead of a colon, for example, cell A12 is showing 4.25
one other thing I should mention.....the times will always be PM...... so 3.2 should be 15:20, and not 03:20
View 2 Replies
View Related
Nov 4, 2005
How can I correct this Time formula which says in the Tag that it produces a
negative Result and hence displays in cell as ####
=(INDEX($A18:$A33,MATCH(MIN(C18:C33),C18:C33,0)))-(60/1440)
What I am doing is selecting the field in A which equates to the lowest
value in C (C= hourly sales), then I am subtracting 60 mins from the value
selected in A. This in effect will give me my closing Times i.e. find the
cell with Zero Sales then subtract 1 hour to find what must be the closing
time (assuming of course that there is at least ?1 of sales per hour while
open).
My cells in A are formatted as h:mm AM/PM, as is the format in the formula
cell
View 23 Replies
View Related
Mar 30, 2009
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
View 9 Replies
View Related
May 22, 2009
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies
View Related
Nov 22, 2008
I have a file which ask for UserId and password. If password is correct, the time stamp should be recorded on the worksheet. However I have some slight probelms on the code I am working on. can someone help me check my coding?
View 14 Replies
View Related
Apr 9, 2012
Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
View 1 Replies
View Related
Apr 11, 2012
I have done a VBA course but am struggling to apply it to my situation. What I want to do is on one spreadsheet, I have a column with "shift, date, grade 1, grade 3, quarantine" in it, and in the cells next to it I want an operator to enter either "day" or "night" next to shift, and the date. Next to the others I want the total weight of the appropriate product made in that time. The spreadsheet I will be feeding off is quite big with a lot of information in it. Down the left hand side is the roll number (we make rollstock). Further along on that same row will be the date, the weight, and a grading (putting it into grade 1, 3, quarantine etc). Our shifts run from 7am to 6:59pm, and 7pm to 6:59am. Which shift the roll comes under is determined by it's end time (also in that row). So basically, I need VBA to say sum up all of column [weights] if column [date] = [date cell in working spreadsheet] and if working spreadsheet says day then column [roll end time] =7:00-18:59 and if working spreadsheet says night then column [roll end time] =19:00-6:59 and also if column [grade] = [grade cell in working spreadsheet] ....
Oh, also on the feed spreadsheet i have a column that i put in a little code date, "AP04" for 4th of april kind of thing, rolls being made before 6:59am on the 5th of april being put into the 5th april as they need to be counted under 4th april as they are 4th april night shift (even though the date will stay 5th april)...
View 3 Replies
View Related
Mar 5, 2014
Column A = persons name
Column B = number of hours
Column C = trade
Column D = shift (as in day, night or weekend)
Column E = I would like the formula that looks at the trade and time and then puts the correct rate.
I have a little table on the site with trades/times and rates. IF and IF THEN do something
I took a screenshot to show: [URL] ..........
View 3 Replies
View Related
Feb 15, 2010
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies
View Related
Sep 13, 2009
Sub sumbotton()
Dim ar As Range
Dim rng As Range
Set rng = Selection.CurrentRegion
Set rng = rng.Resize(rng.Rows.Count + 1)
rng.Rows(rng.Rows.Count).Select
For Each ar In rng.Areas
ar.Resize(1).Offset(ar.Rows.Count) = "=SUM(" & ar.Address & ")"
Next ar
End Sub
View 9 Replies
View Related
Jan 26, 2014
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
View 4 Replies
View Related
Jul 3, 2008
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
View 14 Replies
View Related
Nov 3, 2008
I have a column with numbers ranging from -5 to 250. I want to write a formula to correct the numbers in the next column. If the number is less than 0, I want to replace it with 0,if the number is greater than 150 i want to replace it with 150 and if the number is in the 0-150 range it should be kept the same. Is there a way to use inequalities in a formula to do this??
View 2 Replies
View Related
Jan 24, 2007
I have a set of costs in column c (more that shown below) that have an indicator - for example 0 or 30 (there are more).
I need to populate rows 18 and 19 with the sumif - i have other tables where it is a straighforward sumif as the periods align, here though I need to check that the periods (rows 4 & 16) are checked and then the right data entered underneath.
I can't find a way to combine the sumif, with an if statement checking that the period is correct too? ...
View 9 Replies
View Related
Sep 22, 2009
I would like to know how to add the total time so thnat it returns hours and minutes ?
7:006:306:206:156:306:306:206:006:156:155:304:204:27
View 9 Replies
View Related
