Formula To Enter "0" If Cell Blank
Nov 4, 2005trying to eliminate error messages needed for math formula. With "0" in cells
works good "anyone"
trying to eliminate error messages needed for math formula. With "0" in cells
works good "anyone"
In the attached sheet, there is a range with lots of entered data (a small section of the total) where I would like to enter into all of the blank cells the value 99999.
I have been selecting the range as follows:
This formula must be confirmed with CTRL+SHIFT+ENTER not just ENTER. You will see { } brackets appear.
View 3 Replies View RelatedI can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I need to take a figure that appears in a cell, take off 20% vat from it and then calculate 16% off what is left, that is the figure I need in the new cell ? Show me exactly how to write that formular into the new cell?
View 3 Replies View RelatedI have attached a sample of the spreadsheet. The cell/cells in question are f32:f36 on the first tab.
Question #1 how this formula works or what it does.
Question #2 Is when I enter the required information in cells a32:e32 it enters an N/A in cell f32. When I than click on cell F32 and than click on the formula bar and hit enter the information populates.
Is there a way to add data into a cell that already had a formula? Lets say in cell A1 we have a formula like "=A1*A2". Would I be able to some how enter a value into cell A1 without changing the formula?
Example: enter value "5" into A2 and value "10" into A1 which would result in A1 value being "50" after value is entered.
I know that this creates a circular error but is there any other way to accomplish this?
I know I can put an IF formular into B1 =if(A1="sat",D/O,0) but obviously if people enter data to this cell i.e time they worked the formula goes is there anyway I can put a formular into C1 but have the result entered into B1?
A1 sat
B1 D/O
C1
I need to write a formula that calculates after a value is entered. As in I want the cell to show 12% of whatever value is entered. The form needs to look as it does so I considered inserting a column and shrinking it down so it isn't visible, however this would be a last resort. I am building a spreadsheet for others to use and excel is not something they readily understand.
I am thinking something like:
if(0,0),ifx,(x*12%)
x being the entered value. Is this possible? I am hoping for some out of the box thoughts.
How can a formula perform the equivalent of the keyboard alt enter in a cell?
ie Make =A1&A2 where A1 and A2 are cells containing text become
a1text
a2text
in the new cell.
Is it possible to have a formula in a cell which can be overwritten by manually entering in a number, but if the manually entered number is deleted, the formula remains in the cell.
View 9 Replies View RelatedI am trying to make a very simple macro, that when it is run, it inserts a formula into the selected cell. But I am having problems with quotation marks etc... As it doesn't understand the 3rd and beyond quotation marks.
Sub Macro()
ActiveCell.FormulaR1C1 = "=IF(A1<3000,"Small", "Large")"
End Sub
I'm sure there may is a way of coding it in VBA properly, but I plan to use this method for a range of basic formulas. The idea is this is saved in the Personal Macro Book so I can start a column of formulas by running a Macro rather than typing it in (the example above is a simplified formula, the actual one is fairly long) - then it can just be dragged down on every Workbook I need it in.
Automatically copy formula to next cell when i enter something in perticular cell ....
View 11 Replies View RelatedI want to copy formula from previous row to next cell when i enter something in perticular cell.
i.e
--Colomn A --- Colomn B -- --------Colomn C
1 01-09-07 ----- John ----------=vlookup(b2,$s$1:$t$10,2,false)
2 01-09-07 ----- Smith -------- =vlookup(b3,$s$1:$t$10,2,false)
3
4
5
Now if i enter date in cell A3 then cell C3 should be automatically filled/copy formula as celll C2. and so on......
then if i enter data to A4 then cell C4 should be automatically filled/copy formula from cell C3.
I have also attached example file.
The formula =SUM(E5:E39)-SUM(E45+F41) is what I'm using to enter my total man hours for the week (E5:E39) and subtracting my overtime(E45) and vacation hours.(F41). I have to enter OT and vacation on the discription cells to get the numbers to enter into the proper cells. I would like to use a formula to take the total manhours over 40 and enter them into the overtime cell.
View 9 Replies View RelatedI am having a terrible time with Excel today. The version I'm using is Excel 2010.
I just want a simple division formula in a cell, formatted to accounting. This should be really easy, but it isn't reacting the normal way.
The simple division is =13588/12
The output in accounting format should be 1,132.33.
Every time I enter this formula into a cell that is pre-formatted to accounting, the result is 1132 1/3. It also erases my formula and replaces it with the value.
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
I need a code to enter 2 blank rows at each change in data in column B with totals entered at the end of columns E-J.
I have attached a sample with a before and after tab.
As simple as this sounds, I can't seem to make this work. I am looking for code for the following:
I would like to enter the word "Empty" into a cell if the cell is blank. The
range can be variable. The only columns that contain an empty cell are
columns B or C which can have any number of rows.
I am trying to enter a blank row everytime the 2ND character of a field changes...
sample cells (ALWAYS COLUMN B)(last row needs to be calculated as it changes daily):
2T2W3D3L4H4N4N4N6C6C
when done:
2T2W3D3L4H4N4N4N6C6C
was trying this:
Code:
Dim chkConfirmRw, LastNameRow As Integer
For chkConfirmRw = LastNameRow To 1 Step -1
'Compare the current cell to the one below it
'If they don't match, insert a row row below the current Row
If Range("B" & chkConfirmRw) Range("B" & chkConfirmRw + 1) Then
Range("B" & chkConfirmRw + 1).EntireRow.Insert Shift:=xlDown
End If
'Decrement the counter and do it again
Next
but it does not work.
So this is what I am trying to do, I have a column in my data that is for telephone numbers. When I receive the file some of the fields are blank in that column. I need to add to my current macro a part that evaluates the column for blanks and adds a static telephone number in the blanks (up to the last row of data in the file). I have been able to accomplish this with the following:
Range("N2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "1112223333"
However, when the file that I receive has a telephone number in all the fields the code breaks at this point. I have tried On Error Resume Next, but that just replaces all the remaining cells in the column with the static 1112223333..
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I have a spreadsheet which projects the amount of work on hand each week. It runs up to the end of the year and shows the estimated figures and then each week I input the actual figures. The way it works at the moment is that it looks at the estimated work on hand, adds the work on which has been received and then takes off the work that has been cleared...this then gives an estimated level of on hand work.
What I want it to do is to look at the cell which would show the actual work on hand and if thats empty then go on to look at the estimated work on hand. In other words - I want a formula that looks at a cell to see if there's a figure in it and if not uses another cell instead. I have tried: =If(u5=0,r5+y5-z5)
but when I input a figure into U5 it inputs FALSE into the cell. I don't want it to do that, I want it to look in cell U5 and if there's something there then do U5+Y5-Z5.....and if U5 is empty then do R5+Y5-Z5
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies View RelatedI have a spreadsheet which imports data from worksheets week 1, 2 etc to a monthly summary.
Is there any way I can show a cell as blank if the return equals 0?
I'm sure the resolution is probably simple but then so am I.
Probably a simple method that i have not tried. I have a table where some cells are populated with #N/A. I am trying to work out a formula in another cell saying if the cell that contains #N/A then leave this cell blank.
View 4 Replies View Related