looking for a formula to paste value without overriding another value. For example in my case, I want to replace the value in G column (highlighted in red) by the value from J column (cells that on the same row as the values highlighted in red). For those values in B column that originally start with M180, i want it to be untouched. Right now I dont know what formula should i use.
U can see the attachment for reference.
I am looking for macro to paste this formula: [abc.xls] Total BA def'!E12-'[NEW abc.xls]Total BA def'!E12. into any cell that contains a numerical value. the cell reference would change to correspond with each cell it is pasted into. just like it does in excel when absolutes are NOT used. If possible i would not want it to affect any cells that contain headers which would only have letters in them. If this is not possible it would still be worth having the macro replace everything with something in it and i could just replace the headers from an original file.
View 2 Replies View RelatedWe have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
I need to paste this formula
=AVERAGEIFS(A1:A1000;A1:C1000;"0";A1:A1000;"A1001") into range of cells so the changes relatively to its position e.g. in column B it will look like this
=AVERAGEIFS(B1:B1000;B1:C1000;"0";B1:B1000;"B1001") The macro I recorded will paste formula where I need, but all references remain the same. What should I do to make them change?
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?
P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I've got a bunch of formulas that often are trying to divide by zero, hence this error in the cell. Is there an easy way to modify the forumla or format so that if a division by zero is attempted, the cell can show a zero instead of this error?
View 4 Replies View RelatedFrom a database I import to Excel a large table of mostly name codes. One of the codes is SEP01 for "Separator Type 1", but Excel thinks it is a date code and writes Sep-01 and stores the number 37135. Oother types are like NovaZeck-08, abbreviated NOV08 and you can imagine how Excel interprets that.
View 4 Replies View RelatedSometimes the user will enter a value that isn't part of the VLOOKUP. Currently when I do this, Excel comes up with an error message. Is there a means to override this to allow it to be open ended if need be.
View 4 Replies View RelatedI have a macro that performs an operation on all Excel files in a given folder. The only problem I had was I couldn't walk away until it was done because the files themselves had macros that gave me a Yes/No prompt to recalculate.
I already have a calculate command in my macro so how can I override this command without physically selecting and clicking "No" with my mouse and without editing the macros that are already in the files (each unique and embedded in the individual worksheets). I cant edit each file because there are close to 300 of them.
I would like to copy a worksheet that is password protected. When I copy the whole sheet it says, cannot change part of a merged cell and nothing is copied.
Is there a way to override password protection without knowing the password?
I am developing a VBA for Excel application which uses transient worksheets to collect data from users before writing the data back to master spreadsheets.
My application opens an instance of excel with a workbook and worksheet using the following code:
Dim xlsInstance As Object
Dim wkb As Workbook
Dim wks As Worksheet
Set xlsInstance = CreateObject("Excel.Application")
Set wkb = xlsInstance.Workbooks.Add
wkb.Activate
Set wks = wbk.Worksheets.Add
wks.Activate
I can reference various ranges in the worksheet and do most of what I need but I need to override the Worksheet_Change method. Easily done for static sheets, but this must be set at runtime when the worksheet is created.
Is there a way to set up a macro hotkey from within VBA so that I can override a built-in "Ctr+" option (like Ctr+C, Ctr+U, Ctr+Z)?
View 7 Replies View RelatedCurrently I have used all 3 conditional formats to colour certain cells.
1) Colour whole row 'green' when 'complete' colum ="Y"
2) Colour todays date column black in the date table to easily define todays activities.
3) By entering start and end dates that contractors are required, I colour these selected dates in blue with a letter 'x' in the calendar area.
This can easily be seen from the sample sheet above. If you can adapt this for yourselves carry on.
I am also using a macro (found in these forums) to automatically change the colour of the contractors tab to certain colours when selected from the drop down selection box (enabling more than just 3 conditional formats)
What I would like to happen though, is that when item 3 above is performed (select a start and end date) the filled blocks, colour the same as the contractor colour, instead of the blue with the 'x'.
i am working on a spreadsheet that is doing two things 1) its allowing the user to choose between 1 to 3 number or N/A from the list validation option and 2) there is a checkbox if one selects that all the columns that have the formula will become N/A irrespect of data in it. I am using the following formula in the list validation option a3 is the check boc.
E5 =1
E6= 2
E7 = 3
E8=N/A
=if(a3=true, $E$8, $E$5:$E$8)
The issue I am having with this is, if I start selecting something from the drop down and half way I realize I need to check the box, it will only make it E8 value for the cells I have not touched and the ones I have already selected the drop down value it will remain. However I want it to override the value to E8 irrespect.
1) If the user of the spreadsheet clicks on the check box (this is in A3 cell) which i have linked it using format control then all the cell (Column E) that have the formula =if(A3=True, "N/A", ) will have N/A which is not applicable and not an error as you mentioned. I have successfully implemented this
2) If the user does not select the check box (a3) then each of the cell (Column E) has a drop down which the user can select either 1,2,3 or N/A. Which I have successfully implemented by using the data validations. Now the struggle I am having is as follows: I have attached the spreadsheet for your reference too.
Now if I select number 2 in cell E10, 2 in cell E11 and 3 in cell E 13 and you can see alll the other cell in column E are 0, because of the formula and the box in A3 is not checked in Tab 1. In Tab 2 I have checked the box everything turned N/A in column E except cells E10, E11 and E13 because I had previously selected 2,2,3 respectively. This is not what I want, what I want is when I check that box everything should turn to N/A basically an override function is what I want to created.
For example. Dragging c7 to e5.
My range before dragging and dropping...
After the drop.
What do you think? I think it can be done but do not want to waste time going about it the wrong way. Please give me any ideas on how you would approach this problem.
Some information to start with. The modal dialog that pops up can be dealt with.
This one.
I can determine if I want to insert down or up. I am not concerned with shifting left or right at this point.
I can also determine the original address and destination address of the drag and drop operation by using the change event.
The ranges being dragged will be limited to a single cell.
I am using some Pivot charts, but I want to override what legends calls particular lines. Is there any way to control what legend says?
View 1 Replies View RelatedI have a situation where I need a macro to reference another cell in the sheet if the cell is left blank. If the user wants to edit the value, they have the option to manually input a value but if they decide to leave it blank, it autopopulates the referenced cell.
View 1 Replies View RelatedThis macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I m working with office 2003 pro in Windows XP.
2 Excel questions:
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
Any shortcut for "insert cut cells"? I want to paste and shift cells down instead of pasting over existing data.
View 1 Replies View RelatedI have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies View RelatedI have a sheet that is set up with columns A thru G. In column A is a name and the columns B thru G is just data. How do I cut text thru vba and then paste it to another location.
View 9 Replies View RelatedThe objective is to copy the value from one cell if another cell in the same row is blank onto another sheet (in another excel file if possible). This would have to be done for all value in the sheet.
View 7 Replies View Related