Paste Formula To Numeric Cells Only
Oct 18, 2007
I am looking for macro to paste this formula: [abc.xls] Total BA def'!E12-'[NEW abc.xls]Total BA def'!E12. into any cell that contains a numerical value. the cell reference would change to correspond with each cell it is pasted into. just like it does in excel when absolutes are NOT used. If possible i would not want it to affect any cells that contain headers which would only have letters in them. If this is not possible it would still be worth having the macro replace everything with something in it and i could just replace the headers from an original file.
View 2 Replies
ADVERTISEMENT
Jan 21, 2009
I have data in column with combination of alpha-numeric like "Member # 308166 RCI Number 4801-60436". can I split this without using copy and paste?
View 9 Replies
View Related
Jun 28, 2014
looking for a formula to paste value without overriding another value. For example in my case, I want to replace the value in G column (highlighted in red) by the value from J column (cells that on the same row as the values highlighted in red). For those values in B column that originally start with M180, i want it to be untouched. Right now I dont know what formula should i use.
U can see the attachment for reference.
View 4 Replies
View Related
Oct 27, 2008
We have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
View 3 Replies
View Related
Nov 21, 2013
I need to paste this formula
=AVERAGEIFS(A1:A1000;A1:C1000;"0";A1:A1000;"A1001") into range of cells so the changes relatively to its position e.g. in column B it will look like this
=AVERAGEIFS(B1:B1000;B1:C1000;"0";B1:B1000;"B1001") The macro I recorded will paste formula where I need, but all references remain the same. What should I do to make them change?
View 1 Replies
View Related
Jan 29, 2010
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
View 2 Replies
View Related
Jul 30, 2009
Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?
P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?
View 9 Replies
View Related
Nov 20, 2012
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
View 7 Replies
View Related
Oct 22, 2009
I am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
View 9 Replies
View Related
Oct 29, 2008
formula to add letters but with a numeric value. this is for a schdule sheet. where w would equal 7.5 and x would be 0.
i am using this
=SUMPRODUCT(--(ISTEXT(B3:H3)))*7.5
reads the w and adds up ok but need to be able to put w for work and x for off days and still add the total hours
View 5 Replies
View Related
Dec 7, 2006
I am trying to write a formula that will recgonise either text or numicial value as the result is used with a match formula. In column C I have data as follows:
1400 SBY
1230 9985
ADO
I am using a =--RIGHT(C4,4) formula in column E to get the required data and then using my match formula to extract other data. How can I rewrite the above formula so that it can read either text or numbers that will allow my match formula to work.
View 5 Replies
View Related
Nov 11, 2008
I need to find the number of cells containing a specific word. Here's an example:
Site # Visit
1001 12-Aug-2008
1001 LATE
1002 08-Jul-2008
1003 09-Aug-2008
1004 LATE
1005 12-Aug-2008
1005 LATE
I need a formula that will calculate how many "LATE" cells there are.
View 3 Replies
View Related
Jan 26, 2007
I currently have an input screen where users copy and paste data from a seperate spreadsheet into a range of cells B11:B15 in the input screen.
A macro is assigned to then extract this data and paste into the recording sheets behind.
I would like to format somehow cells B11:B15 so that only numeric entries can be pasted in and not any alpha including #.
View 9 Replies
View Related
Jul 16, 2013
The following is how my sample worksheet looks like:
A
10
Count of A's
12
A
1
Count of B's
13
A
24
[code].....
The two count cells, Count of A's & Count of B's have been calculated with the formulas
=COUNTIF(A$1:A$25,"=A") and =COUNTIF(A$1:A$25,"=B") respectively.
Now, my problem is I want to select the cells with only A's or only B's, along with their corresponding values, but I want to select it with the two count values I found above (12 and 13 respectively), because the data I have to work on is subject to change and each time there may be different numbers of A's and B's.
View 9 Replies
View Related
Mar 28, 2007
I am trying to write a macro in excel to clear all cells within a range that are non numeric. I seem to be going round in circles trying to find out how to do this.
I assume I have to use the IsNotNumeric(Target) argument but I can't find how to specify the target within a range.
View 9 Replies
View Related
Nov 4, 2008
If I have the following cells and values
A1 = 0
A2 = 0
A3 = ""
A4 = 0
I want a vba if statement that makes A5 = "Numeric.
If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0
I want A5 to = "Non Numeric"
Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""
I want a5 to = "Non Numeric"
Is there a way to do this without looping through each cell in the range?
View 9 Replies
View Related
Sep 27, 2006
I need to test a condition that at least one cell in the range (A1:A10) is not numeric. Is the syntax smth like: IsNumeric=False or smth like that? I cannot recall.
View 9 Replies
View Related
Dec 29, 2007
I am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies
View Related
Jan 10, 2008
Trying to make an excel macro that changes the background of a cell dependant if the value is between one number and another or equal to another number.
Cell values =
a1 = 250
a2 = 475
a3 = 715
vba Example:
Case Is > 200 and < 400
colchoice = 4
Case Is >450 and < 550
colchoice = 5
Case is >600 and <700 or = 715
colchoice = 6
If i run the macro the cell background should be
a1 =4
a2 =5
a3 =6
View 4 Replies
View Related
Jan 19, 2008
I am trying to code a command button to clear a range of cells if any of them contain a numeric value. For example. If any cells of cell range A1:C10 contain a numeric value then they would be cleared. Not all the cells in the range but only thouse contaiing numeric values. I have tried various methods with not-so-good results.
View 9 Replies
View Related
May 1, 2008
I have 2 large rows of data next to each other imported from a different programme. Some of the cells in these 2 rows consist of values, some consist of words. I only want to cut the cells with values in these rows and paste them in a new row, called TXid. I have written VB code that cuts all the data in the rows and pastes them onto the new row. Now I would like to cut only the values in the row. How do I select only the values in the cell?
Cells.Select
Cells.EntireColumn.AutoFit
Range("I1").Select
ActiveCell.FormulaR1C1 = "TXid"
Range("G3").Select
Do
If ActiveCell = IsNumber = True Then
Selection.Cut Selection.Offset(0, 2)
End If
ActiveCell.Offset(1, 0).Select
Loop Until ActiveCell = ""
Range("H3").Select
Do
If ActiveCell = Isnumber = True Then
Selection.Cut Selection.Offset(0, 1)
Loop Until ActiveCell = ""
The ActiveCell = Isnumber = true is not working the way I want it to.
View 9 Replies
View Related
Jun 4, 2014
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv
19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
View 6 Replies
View Related
Sep 1, 2008
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary
ABCD123BLA08 would be ABCD123
SHU246BLU would be SHU246
I147ORT08-12 would be I147
View 9 Replies
View Related
Feb 15, 2014
I have a spreadsheet where I enter text values in a cell, e.g. (.5 x .5) x 2 x .009. I want to find a way to automatically populated the cell to the right with the formula version, e.g. =(.5 * .5) * 2 * x .009 and format as three decimal place number.
One other question, is there a way to enter a template for entry in a cell. It would be nice if the text value above would take care of the parenthesis and multiplication signs for me.
View 3 Replies
View Related
Nov 21, 2012
The formula below was posted recently as a way to extract a numeric substring from somewhere in larger string. When I first saw this formula, how it "came up with the goods" and so I spent some time looking at parts of it to see what they did.
Although I've made some progress, I still don't fully understand it. Heres the formula, and below Ive detailed how far I've got:
=Iferror(lookup(9.99e+307,--mid(a1,min(find({1,2,3,4,5,6,7,8,9,0},a1&1234567890)),row(indirect("1:"&len(a1))))),0)
I hope my findings below are correct:
1. The formula is returning the first substring of contiguous numeric characters from the full string in Cell A1
2. 9.99e + 307 ensures that the search value won't be exceeded by the returned value.
3. The Mid function uses Min(Find( to get the character position of the first numeric in A1 (so MID then has its first 2 parameters). So far so good.
4. Now... I cant work out where MID parameter 3 (the substring length) comes from. I suspect its the row function, but can't see how as this isn't an array formula, and without CTRL+Shift+ Enter, I could only get Row to return 1 in my experiments (giving me only the first substring digit).
How does the formula return the correct number of numeric characters, (apparently) without counting them?
View 3 Replies
View Related
Feb 22, 2012
Is it possible to validate a string with both numbers and text with a formula using data validation? (I don't want to use a User Defined Function)
in Column C, Starting in cell C2 I have a 12 character string of six numbers, four letters, and two numbers. like this:
280838ZNOV11
is it possible to use a Custom Data Validation formula to ensure the user follows this format?
View 9 Replies
View Related
May 29, 2013
I'm trying to find out exactly how I can use sum product on cells that have text and numeric values. Here's my sample data (6 points):
TN FX1576 20, TN FX1577 25, AZ FX1577 30, AZ FX1577 35, FW FX 1577 40, and FW 1577 45.
I wish to do the following: I want to sum all of the right numeric values based on the first two text values(TN, AZ, or FW). I want to sum these numbers to their respective total cells at the top of the page. So far I can sum the numeric values fine using the following formula: =sumproduct((right(range,2)*1) but when I try to differentiate between the respective locations (AZ, TN, or FW) I get an error message.
Attached is an example of what I'm trying to do along with the formula I'm currently using and yellow shading to represent where I want my respective sums to go.
ExA.xls
View 1 Replies
View Related
Jan 16, 2013
I am creating a large vlookup. I have multiple instances of a name, twenty to be exact. I copy the first cell it is name1 and then I paste it for the next 19 cells below. Is there a quick way that I could have it go name2 name3 name4 etc all the way to 20? Currently I am just having to click and change the value manually.
View 11 Replies
View Related
Jul 2, 2014
How do I select or highlight cells from row 1 through row x (a numeric variable) in column A? I'm eventually hoping to shift those cells in column A (from row 1 to x) to the right by one.
View 1 Replies
View Related
Mar 24, 2014
I need to find the word 'numeric' in the merged cells of first row (always first row) and to select its corresponding 2nd row data using macro. In the attached file, M2 to P2 data to be selected.
View 3 Replies
View Related
