Excel 2010 :: Click On Pivot Chart Data Point And Display Data
Apr 22, 2014
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
View 2 Replies
ADVERTISEMENT
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Jul 30, 2012
Can Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
View 9 Replies
View Related
Apr 30, 2013
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
View 8 Replies
View Related
Jun 23, 2014
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I'm using MS Excel 2010
View 6 Replies
View Related
Dec 1, 2011
I tried multiple variations of searches for this, but can't seem to get this to work. I've been asked to perform some analysis on the number of direct reports for each manager in our company as well as the number of total reports. I have been able to calculate this with no problem. My difficulty comes with the request to be able to display this information in a particular way with Excel. (this is using Excel 2010)
What the VP would like to be able to do is to drill down on each manager to see all of their direct reports, and then, for any of those direct reports that are managers, be able to further drill down into those people's direct reports. The difficulty I am coming to is that, depending on the employee, there can be as many as 9 layers of management when I work this all the way up to the Executive Vice President Level.
My data is currently laid out such that my first 5 columns are identifiers such as employee id, employee name, job title and organization information. After that I have columns for the managerial hierarchy. For example first column of this (let's call it column H) is the EVP, the 2nd column (column I) is the Senior VP, 3rd column (column J) has the various reports to the senior VP, 4th column (column K) is the managers that report to those in column J, and so on, up to 9 layers.
For example, one of the employees in my finance area would have name of the EVP in column H, the SVP in column I, the director in column J, and their manager in column L. The remaining columns that could house hierarchy data are blank for them because of where they are in the hierarchy.
When I set up the pivot table, I placed each field of the managerial hierarchy in the row area and then the employee field at the end. The problem I encounter is that with all of the blank cells in the data due to the varying levels of the hierarchy, I get a lot of (blank) fields in the pivot table for any layer below where the person fits in (ie, for the example above, the EVP, SVP, and manager name come in find, but then it is (blank) on down to the employee name.) If I deselect (blank) in the field settings, it eliminates all of the rows that don;t go as far down in the hierarchy, i.e. I deselect (blank) at level 5, any employee that is 4 or less levels from the EVP does not appear.
I also tried doing the same as above but including the employee name in my hierarchy (so for the example above, the employee name would be placed in column M). This worked a bit, but then after every employee was the series of (blank) drill down options.
The ideal solution that I've been asked to come up with would be to have the data display as it does when I've set the pivot table up with the employee name in the appropriate hierarchy level, but not have the drill down (blank) show for those that don't have layers below them.
View 1 Replies
View Related
Feb 24, 2014
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
View 2 Replies
View Related
Mar 27, 2013
I cannot solve with Excel 2010 and I have searched all over for the answer.
I have sales data that is approximately daily and would like to count the monthly data and summarize it as an average for the month in a separate column.
For example, I would like to turn this:
3/2/2005 $xxxx
3/5/2005 $xxxx
3/20/2005 $xxxx
4/2/2005 $xxxx
4/10/2005 $xxxx
Into this:
March 2005- $xxxx (monthly average)
April 2005- $xxxx (monthly average)
I have a feeling some 'countif' formula would work but I am not sure how to do this.
View 4 Replies
View Related
Oct 4, 2013
I'm using Excel 2010 and I've got a chart on a worksheet and the worksheet needs to be protected. I'm able to manipulate the chart in any fashion EXCEPT the position of the Data Labels. Is this a bug in Excel 2010?
View 3 Replies
View Related
Nov 27, 2012
Example attached : Copy of CAB.xlsx
View 2 Replies
View Related
Nov 29, 2011
Excel 2010 how to not chart zero values in a Pivot Chart?
View 1 Replies
View Related
Jan 6, 2012
I'm used to work with the Excel 2003 edition, however I just changed the version to 2010. As result of that I do have the following question:
How can you view the source data of a pivot table in Excel 2010?
View 6 Replies
View Related
Mar 19, 2013
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
View 3 Replies
View Related
Jun 20, 2013
Showed a line chart using 2 vertical axis where the first was a single line along the graph (ie. 42%) then the second data series was a single data point that was above or below the line which easily showed if the result lied above or below the threshold.
How to get a straight line across the body of the just to be used as the theshold line?
View 1 Replies
View Related
Jun 27, 2012
I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?
View 2 Replies
View Related
Feb 26, 2014
I am trying to display data on a chart and dynamically change the items to display by manipulating the filters. What I cannot figured out is how to display the Pivot Table Grand Total column on the chart. This is the total that the pivot creates and there is no total field in the data. Hope this explanation I gave is clear.
View 1 Replies
View Related
Jul 15, 2013
At the moment I've got a chart with 3 series lines on it and each line has 12 points. I need to select the 12th point on each series in the chart and create a label for it. The 3 lines are Budget, Forecast and Actual and often the Forecast line hits the same points as the Budget line in the chart and every time I try to find a way to select the last point on the Forecast line, I end up selecting the budget one because it's the one in the foreground.
I can select the forecast line with the keyboard arrows, but not the last point.
I also try to zoom in to get it but one of my charts has exactly the same forecast line as budget line and I still need the forecast line because the forecast will change in future.
I can delete the budget line then add it back, but this is difficult and one I'd have to repeat many times because I'm always making graphs and labelling the final point in a series is something I'm going to have to do more often.
How do I select the last point on the forecast line if it's directly behind the budget line?
View 4 Replies
View Related
Feb 16, 2007
I am looking to create a dynamic bubble chart. To do this I am using offset to create the series formula which without listing all the data names turns out to be something like this (where 297 will adjust to the number of rows with data): =SERIES(Project!$A$5:$A$297, Project!$J$5:$J$297,Project!$P$5:$P$297,2,Project!$Q$5:$Q$297)
My problem is that by creating the chart in this fassion I am unable to get a unique name for each data point. For example, if row A looks like this,
A5: 1
A6: 2
A7: 3
each data point will be named 1 2 3. How do I either create a new series for each row dynamically or get the specific name from column A to associate with the correct data point?
View 2 Replies
View Related
Feb 21, 2014
how to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
View 3 Replies
View Related
May 5, 2008
I have to create a chart XY Scatter plot in excel. I have to differentiate the data points color based on the another column "category". Now I can change the data points color manually. Since the number of points is huge, is it possible to color the data points based on a column?
View 5 Replies
View Related
Nov 30, 2011
I'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.
View 2 Replies
View Related
May 28, 2014
I am using Access as a backend and Excel as a frontend for my project. Now I have to display a chart in the userform using data from Access database .
View 2 Replies
View Related
May 12, 2012
I have two separate worksheets:
I'm trying to find a formula that looks at Column A on both sheets (each client is allocated a unique number) and if they match enter in column D of the referral sheet the month they were seen but only if it is a 1st contact (appt type on column D of contact sheet)
Referral
A
B
C
[Code]....
way to do the calculation using Excel 2003
View 9 Replies
View Related
Feb 22, 2014
I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
[URL]
View 2 Replies
View Related
Dec 6, 2011
I've come across an excel spreadsheet that has a pivot table which displays data from a sql server connection query. This worked fine before but recently the database it connects to was moved.
The connection string was updated to reflect this.
The main difference in the connection apart from a new server name, is that where before we were using a Trusted Connection, now we're using a SQL login.
Now only some of the data is shown.
The query still works - if I go into Edit Query (Data>Connections>Properties) the query runs fine. It just doesn't display properly anymore
I think this is something to do with the pivot table rather than any connection properties.
View 2 Replies
View Related
May 11, 2012
I'm working on a project where I need to import 150 csv files into an Excel2010 workbook, with each csv file being on a seperate worksheet.
I would like to set up a macro to point to the folder I will have these saved in this up so that each month when I get updated csv files I can repeat the process and bring in the new data. how to create this, I'm very new to VBA?
View 1 Replies
View Related
Sep 19, 2013
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
View 1 Replies
View Related
Nov 16, 2008
Have an auto-calculator sheet on..mean formulas are input in rows (to calculate yield from no. inspected & no. found defective)....am running a pivot chart based on it to calculate no. of defectives by product and date...
The issue is had selected the entire worksheet for the pivot (including the rows with no data input as of yet but will be inputed in the future)...the problem is the pivot data gets all messed up because of the blank inputs...as soon as i select only the area with data input it works fine.....as of now have put in a generic format so that it reads it...but is there a way where i can leave it blank and still the pivot will refresh and calculate the data when put in????
current format is date-week-no. inspected-no. defective-yield...have input 1 jan 2001 as default date...and 0 and 0 as default no. inspected and no. defective....do not want to keep on doing this...
View 3 Replies
View Related
Feb 21, 2014
I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
View 2 Replies
View Related
Jan 14, 2014
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
View 5 Replies
View Related
