Get State Of Checkbox On Worksheet
Jan 14, 2009I need to get the state (xlon or xloff) of check boxes on a worksheet. i have tried the following but unable to get it to work.
View 3 RepliesI need to get the state (xlon or xloff) of check boxes on a worksheet. i have tried the following but unable to get it to work.
View 3 RepliesI want to write code for a Checkbox that when checked it fills a cell with a color, but if it is subsequently unchecked, the cell color disappears.
View 9 Replies View RelatedI have a Worksheet_Change event like the one below. When Checkbox1 is ticked the it subtracts and when it's not, it adds:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim intValue As Integer
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
intValue = CInt(Target.Value)
If CheckBox1.Value Then intValue = intValue * -1
Select Case Target
' Apples
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + intValue
Case Is = Range("X12")........................
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click ()
' If CheckBox1 = marked
Call MacroA
'Else (CheckBox1 = unmarked)
Call MacroB
' End If
End Sub
I am having a little bit of difficulty find ways to effectively incorporate a checkbox panel into a form interface. What I am trying to do is all the user to select using checkboxes which of 31 separate columns will automatically be deleted or not deleted. The method I have been using is to create 31 checkboxes, and then use the value of the checkbox (true/false) to determine a value in an array, which then can be used to delete the column by a separate sub.
However, I am interested in being able to have the checkboxes start checked or start unchecked by values contained in a different array. My problem is that I am unable to reference the checkbox itself until the form containing the checkbox is opened, but at that point I don't know of a way to cause the desired checkboxes to automatically be selected without placing a command button that must be pressed to fill them in. Essentially I want to be able to open a userform that has checkboxes preselected.
In my spreadsheet the user has the option to put in a numerical value into different cells, which will update (add to) another. So if we have an initail value of 20 in "I10" and the user puts in 20 in "W12", then I10 will display 30.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
Select Case Target
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + CInt(Target.Value)
Case Is = Range("X12")
Logbook.Show
Range("J10").Value = CInt(Range("J10").Value) + CInt(Target.Value)
Case Is = Range("W13")
Logbook.Show.................
I'm trying to create an array formula that returns all the cities in a given state by imputing the state's abb in cell K2. The returned cities go into column J. California has the most cities(430) and the cities are 5000 rows deep.
View 7 Replies View RelatedI have a worksheet with various data autofiltered. I know when I filter on one of the fields, the drop down arrow becomes blue. If I filter on one or more fields, finding which fields I have autofiltered can become hard to find.
This is my question -- Can I put a button or some type of one touch command were I can take those autofilters off and return the worksheet backs to its original state before I autofiltered?
I have a problem to check the value of a checkbox when I write the code in Module1. I have several worksheets, and in each worksheet there is a CheckBox1. I want the macro (in Module1) to perform a given code when the CheckBox1.value = true and visa versa.
The code I'm using is as follows:
Option Explicit
Global ws As Worksheet
Application. ScreenUpdating = False
For Each ws In Worksheets
If CheckBox1.Value = True Then
'Do code1
Else
'Do code2
End If
Next ws
Application.ScreenUpdating = True
End Sub
When the Macro is run, an error msg is showing "RunTime error '91'.
Does anyone know how to make this macro function? I've searched the forum, but couldn't make any of the codes suggested to work.
I have a workbook containing many different sheets. What I want to accomplish is when I click on a check box on one sheet, I want the check box in a different worksheet to be unchecked. I have form control checkboxes in my workbook, so I used xlOff as the value.
Here's what I have in my VBA code.
Worksheets("February").CheckBoxes("CheckBox13").Value = xlOff
It is giving me the error "Unable to get the CheckBoxes property of the Worksheet class"
I have 71 checkboxes that I want to transfer the Checkbox Caption if true. If the checkbox is false I want to transfer a value of "0". The captions are being transferred to a different worksheet. Below are a few entries if I was to enter them all separately, but I assume there is a way to do all at once?
View 4 Replies View RelatedI am having difficulties with this one. I have a button on my worksheet (sheet1) that runs a macro.
View 4 Replies View RelatedI want to have a Checkbox (Form) that is in my Worksheet to disable/gray-out once it is selected. I don't want people to be able to uncheck it again. I want them to be forced to click another Checkbox to enable it again.
Example:
Two Checkboxes:
Check Box 1 = "Apply"
Check Box 2 = "Delete"
Once "Apply" is checked, gray it out. This will force a user to click "Delete" in order for the "Apply" button to be enabled again. I do not want a user to click "Apply" once selected as their way of 'deleting' the information.
I am creating a main worksheet (Legend) in which information will be entered and then populate to other areas (worksheets) within the workbook. I would like to create a print macro - that will run and print all the worksheets that we have selected on the "legend" page. These worksheets would have been selected by ticking a check box.
My question is how to associate a check box to a worksheet? For example - the second worksheet is named " Schedule A" 3rd "Schedule B" and so on.
- The check boxes will be name schedule A, Schedule B and so on.
- I would like to associate (link) the checkbox Schedule A with the Worksheet of the same name. Then when this checkbox is selected, and the print macro runs it will print the worksheets that are selected.
I have a userform with 17 checkboxes that their captions should correspond with column A range ("A2:A18) on a worksheet.
Is there a way in userform_initialize, or activate, to create the captions from that range?
I could type the code 17 times like;
Code:
me.checkbox1.caption = wb.worksheets("area").range("a2").value
I was curious to know if it could be looped? Textboxes on the same userform.
I have a userform where the textbox already pulls data from a worksheet. I have a checkbox next to the textbox, If the checkbox is true it finds the textbox value on a worksheet and using Offset it inserts "yes" in the next cell.
View 6 Replies View Relatedmarried, widows, single checkbox is selected
macro solution
good work.
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
Depending on the text entered into one cell, I'd like another cell to state n/a. For example, if cell a2 shows the text of cash, then cell b2 would show n/a.
View 3 Replies View RelatedI have a spreadsheet that is used for sales territories. In column A, I have customer names, in column B, I have the State abbrev., In column C I would like to return as salesperson's name based on the State.
Aco IL John Smith
ABco OH Jane Doe
Cco WI John Smith
Czco IL John Smith
Dco WY Adam Scott
Fco UT Adam Scott
FDco CT Bill Jones
etc WI John Smith
So I need a formula to enter in column C, that will return the correct salesperson based on the state in column B. (when auto filled down)
For example: IL,WI,MN,IA,ND,SD = John Smith
OH,PA,KY,MI, = Jane Doe
etc
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedI've got a list of numbers between 0 and 1
eg.
0.25
0.59
0.73
0.15
0.99
in column A
if I want column B to state "low (0.00-0.33), medium (0.34-0.67) or high(0.68-1.00)" for a corresponding value in column A, how would I do that?
Our state carries a 4% sales tax on all items except food and prescriptions.
Our county carries a 3% sales tax on everything.
Attached on my work sheet:
Column "C" determines if an item is either food or non-food.
"G5" is the subtotal of column G
"G4" is the S/tx on "G5" at 3%
"G3" is the S/tx on "G5" at 4%.
"G2" is the gross pay out.
My question is:
I'd like a formula for Cells "G3" and "G4" that can determine which items paid for in column "G" match a "N" or an "NF" in column "C".
If an item in column "G" represents a "F" in column "C", then there should not be anything in cell "G4" If an item in column "G" represents a "NF" in column "C", then there should be a figure in "G3" & "G4".
to automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
1 - If any cells (with data in it) in the "state" column contain any of the following abbreviations in it...
AB, BC, MB, PE, NB, NL, NS, NT, NU, ON, QC, SK, YT
Then all matching row cells in the column named "country" should say "Canada",
AND....(it must also meet this criteria)...
Criteria 2 - If any text in "Country" column is "Kryponite", AND "State" column is blank
If BOTH criteria 1&2 are met.....THEN...
then delete both the country & state columns
If not, keep both columns and highlight in light red any errors to this macro.
Are Boolean variables ALWAYS initialised as FALSE when they are created?
I am wanting to leave a 'marker' in a function so that I know whether it is the first time it has been used or not. Something similar to this:
I believe many people face is to automate a process that split name, address, city, state, and zip.
here are the examples of name, address, city, state, zip that i would like to be split in each column. this is difficult because the datas are not consistent and not predictable in how it WILL BE GIVEN....
I am looking to create a macro button which will reset the sheet to its original state.
I have locked the cells users should not imput data into, and unlocked where they add their data.
At the end of every school year, they will need to be able to reset ALL the workbooks back to their original state with all the reference formulas.
I am thinking I will need to tell the macro to create a hidden copy of the workbooks and then upon hitting reset it will use the backup to override the current. But they will need to be able to reset at the end of every year.
I would like to have one reset button that resets ALL the workbooks at once, but if not, I could put a reset button on each workbook.
As I have just started my VBA training, I have a code that will create a backup and hide it, but I have no idea how to do the reset portion. And again, since they need to be able to reset it each year for x amount of times, I don't know how to get it to keep having a fresh backup and get everything to its original.
Upon initial display,if my toggle control value is True, I would like it to appear "selected", or down. If the initial value is False, I would like it to appear "deselected" or up. Even though I can successfully detect the state and set the color and caption, the control always appears up, as though it is not selected.
Private Sub UserForm_Initialize()
If AppInfo_Form.debugToggle = True Then
AppInfo_Form.debugToggle.Caption = " Debugging Is ON"
AppInfo_Form.debugToggle.BackColor = &HFF00&
Else
AppInfo_Form.debugToggle.Caption = "Debugging Is OFF"
AppInfo_Form.debugToggle.BackColor = &H8000000F
End If
End Sub