In my spreadsheet the user has the option to put in a numerical value into different cells, which will update (add to) another. So if we have an initail value of 20 in "I10" and the user puts in 20 in "W12", then I10 will display 30.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("W12:X24")) Is Nothing Then
Select Case Target
Case Is = Range("W12")
Logbook.Show
Range("I10").Value = CInt(Range("I10").Value) + CInt(Target.Value)
Case Is = Range("X12")
Logbook.Show
Range("J10").Value = CInt(Range("J10").Value) + CInt(Target.Value)
Case Is = Range("W13")
Logbook.Show.................
I have a Worksheet_Change event like the one below. When Checkbox1 is ticked the it subtracts and when it's not, it adds:
Private Sub Worksheet_Change(ByVal Target As Range) Dim intValue As Integer If Not Intersect(Target, Range("W12:X24")) Is Nothing Then intValue = CInt(Target.Value) If CheckBox1.Value Then intValue = intValue * -1 Select Case Target ' Apples Case Is = Range("W12") Logbook.Show Range("I10").Value = CInt(Range("I10").Value) + intValue Case Is = Range("X12")........................
I have a checkbox and a command button on my sheet. I want that, depending if the checkbox is marked or not, I can call two different macros. I don't know if this is possible at all or maybe can be done easier otheriwise, but this would more or less be my idea of what should happen:
Private Sub CommandButton1_Click () ' If CheckBox1 = marked Call MacroA
'Else (CheckBox1 = unmarked) Call MacroB ' End If End Sub
I am having a little bit of difficulty find ways to effectively incorporate a checkbox panel into a form interface. What I am trying to do is all the user to select using checkboxes which of 31 separate columns will automatically be deleted or not deleted. The method I have been using is to create 31 checkboxes, and then use the value of the checkbox (true/false) to determine a value in an array, which then can be used to delete the column by a separate sub.
However, I am interested in being able to have the checkboxes start checked or start unchecked by values contained in a different array. My problem is that I am unable to reference the checkbox itself until the form containing the checkbox is opened, but at that point I don't know of a way to cause the desired checkboxes to automatically be selected without placing a command button that must be pressed to fill them in. Essentially I want to be able to open a userform that has checkboxes preselected.
I would like a dynamic range to be multiplied with 2. The Range is always start in cell H14 to P?
I have multi checkbox in column F,
So here is an eksampel: If checkbox in F4 is true then Range H4:P4, should by multiplied with 2 else if the chekbox is FALSE, then only multiply with 1.
I want to entry data in the Range H14:P? by this code
Private Sub Worksheet_Change(ByVal Target As Range) 'Do nothing if more than one cell is changed or content deleted If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
I'm trying to create an array formula that returns all the cities in a given state by imputing the state's abb in cell K2. The returned cities go into column J. California has the most cities(430) and the cities are 5000 rows deep.
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object) If Worksheets("Dosing").Range("BM21").Value = 0 Then CheckBoxLD.visable = False Else: CheckBoxLD.visable = True End If End Sub
I have a userform with a checkbox. If the box is checked, I would likke to write "Option One" to cell A1 in Sheet1 when the Close button is clicked. I can't get the code correct for this. The workbook is attached.
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click() Dim rClSkills As Range Dim rClLookup As Range Dim var1 As Integer Dim iDecision As Integer Set rClSkills = Range("TblClSkills") Set rClLookup = Range("ClassLookup") iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?") If iDecision = vbYes Then var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0) If CboAppraise.Value = True Then.............................
I would like to create a qestionairre with checkboxes used to answer the question "Do you need____" (Check if yes). On the following workbook I would like a list of all items needed, and a list of items not needed on yet another workbook.
Is there a way to create these lists without having blanks for values that are not true? (and because Im sure there is HOW?)
I have 2 workbooks open, one called "Temp" and the other called "CRM 2" My active workbook is "Temp". I am trying to insert a value into the active cell in this workbook, based upon the value of a checkbox in the other spreadsheet. Here's my
If Windows("CRM 2.xls").SelectedSheets.CheckBox6.Value = True Then Selection.Value = "By Phone" I've tried variations on this such as:
If Windows("CRM 2.xls").ActiveSheet.CheckBox6.Value = True Then Selection.Value = "By Phone"
I have a set of data (Data tab) that lists name, a high number, a low number, and the state that is associated with the name and range between the high and low number (see attachment). I am trying to figure out a formula that will return the state value based on a match of the name and the number between the high and low. I am trying to use Index/Match but i cant figure out the "between the high and low" portion.
I have a large data set (excel file), of "Names", "Phone Numbers", and i need to sort this based on the States that correspond with the Phone numbers. The states currently do not exist in the spreadsheet, so my current problem is trying to insert those states into the spreadsheet.
There are over 100 area codes in the data set, so i'll likely have to write a large "If" statement in VB to run through them all, but that shouldnt be a problem.
NAME, PHONE, STATE Bleh, 555-555-5555, =ChkState(B2)
I've been playing around with the VB Stuff in Excel and this is what i've come up with for trying to insert the State field
Function ChkState(pVal As String) As Long
Dim AreaCode As String Dim StateAbrv As String
AreaCode = Left(pVal, 3)
If AreaCode = "201" Then StateAbrv = "Test201" ElseIf AreaCode = "203" Then StateAbrv = "Test203" ElseIf AreaCode = "555" Then StateAbrv = "Test555" Else StateAbrv = "0" End If MsgBox StateAbrv End Function
I'm fairly new to this VB stuff, my main problem stems from trying to insert the "StateAbrv" back into the Cell for the spreadsheet.
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
I am looking for a formula or multiple formulas to perform an If/Then statement, adding and dividing. Example listed below.
If O8 = 'Y' then perform XXXX, otherwise, do nothing.
XXXX= in Y8 search for word 'apple' and add tally to AA46, in Y8 search for word 'orange' and add tally to AA47, in Y8 search for word 'banana' and add tally to AA48.
Take AA46/Y46 and put results in AB46.
If this could be put into on cell and perform all the needed actions, otherwise, multiple cell formulas is ok.
Can numbers and text be included in the same cell and still have the number be included in the total in a formula in another cell? Or must a cell only have numeric values for it to be seen/included in a formula's total value.
I'm trying to create a database that totals materials for a construction project. I want to display the number of doors for a house in a row of cells and have the all the doors totaled in the last cell. This I have no trouble doing.
The problem arises when I want to add some text information about the style of each door in the same cell that the number of doors is shown. As soon as text information is added to a cell that has numeric information, that cells numeric information is not included in the final total in the last cell in the row.
I resorted to using comments instead, but, when the are made visible on the spreadsheet, they don't seem to lock to a relative position regarding the cell they're attached to. For instance, if I widen columns or make any significant spatial changes to the spreadsheet, the comments don't move with the changes.
There may be a way to lock comments to stay in a relative position regarding the cell they're attached to. And if that's the only way to make comments for the items in each cell stay with the cell, then I'll have to use that method. But I'd rather not have to use the comments function at all.
I'd much rather be able to have numbers and text be in the same cell, and still have the number value of that cell be included in a formula total at the end of a row of numeric information.
Example: (In this example separate cells that include both numeric values and text are indicated by parenthesis. The final cell that has the formula that totals the numeric information in the separate cells is indicated by brackets)
It might be very simple, but all I need is if I have data on A1, and i have 3 check boxes labeled: NEW, EXISTING, and ARCHIVED. I want it to automatically check the corresponding boxes. So if "NEW" is typed under A1, it'll check "NEW" box. "EXISTING" will check "EXISTING" check box and so on.
I have a userform with a CheckBox and a ListBox. Is there a way to have the CheckBox to automatically get checked if a selection is made in the listbox?
I'm building a spreadsheet which includes a few columns which have activex check boxes which are linked to cells. I want to allow the users of the spreadsheet to insert new rows if necessary. Ideally, when these new rows are inserted, the check boxes would also automatically appear in the corresponding columns of the new row (and be linked to the relevant cells), just the same way that pull-down menus and formulas automatically copy into the new row. Is there a way to do this?
Depending on the text entered into one cell, I'd like another cell to state n/a. For example, if cell a2 shows the text of cash, then cell b2 would show n/a.
I'm playing with an excel file that has 3 different spreadsheets and basically the same layout just different product lines on each sheet. I need to find a snipet of VB code to change cell color depending on if another cell is used(filled in) or if it is blank. I'm very limited to my VB skills but can tinker enough to get what I need if someone points me in the right direction.
here is an example of what I'm trying to accomplish using the following Columns:
Is it possible to check the conditional state for a specific condition for a specific cell. For example a cell has 1 or more conditions.
A condition will toggle to a condition if true or false etc. The specifics is i use red (color 255) if a cell has not met a specific condition (of 1 or more conditions) So if the cell is mandatory to be populated, and is blank, it will be red, if not it will be something else.
But i want to loop all visible cells with conditional formatting, and where the cell has a condition when true will show interior color = to 255 return the cell address. To msg the user where data entry is still required etc.
I am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank. Cell 'B1' has a drop down to select specific items. Cell 'C1' is the date of the order and is a locked cell. Cell 'D1' is the date of completion and is a locked cell. The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date. If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
i have an excel spread sheet (2010) that contains city, st and zip in one cell. i need to separate these into 3 individual cells. My problem is the some of the cities are one, two and sometimes 3 words so using a delimiter of space will not separate them correctly.
I am trying to enter a value in a cell which is dependent on a corresponding value in a table. I have a table A which has a cab type and a corresponding cab number.
What I want to achieve is that when I enter the cab number in another table say in cell (D3), the cab type is automatically entered in cell (C3).
