I have raw data with date & days of the month .
From this raw data I want to get the collective sums for each day of the week using Pivot or any other means - I tried Pivot but propabaly due to lack of my understanding of the same the desired result was not recived
I am attaching a worksheet which shows what I would like to see. I am having difficulty writing the formula. The database I have is a list of forex trades. Each trade is made at a specific time, and involves a specific currency pair (such as EURUSD). I want to summarize the trades in a table which sums up a week's trades for each pair. (see worksheet).
View 5 Replies View RelatedI am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
I am using Excel 2003.I need two distinct sums:
I need to calculate out the loan amount of approved loans by week (weekending on Sunday). For example for the week ending December 28th, 2013
$1,234,567,890 in total loans
I also need to have a list of sums of the loan amounts per code types of approved loans. For the week ending December 28th, 2013
$123,456.00 in total loans for Code: LTV/TLTV > Guideline max
$987,654.00 in total loans for Code: FICO > 10 pts below Guideline min
I need to ignore any loan amounts and codes for any loans that have not yet had a approved date entered and also ignore all loan amounts for any loans that are denied. I have tried doing this in many different ways with Pivot Tables and I am not getting the results I need.
I have a pivot table/chart that I need to show the sums as top 20 (or any other number) and All others. How can I do this.
I have an example file here: [URL] ...........
I need a formula for the highlighted yellow area that pulls and sums from a reference table. Not a traditional Vlookup because the reference within the report can appear in multiple columns within multiple rows.
ReportABCDEF1AccountJanFebMarApr2Overtime(L7)Overtime300 300 300 300 3
Salaries(L8)Salaries1,170 1,170 1,170 1,170
Expected ResultsReference PageABCDEF1
Account 1Account 2JanFebMarApr2
Additional PayOvertime(L7)1251251251253
Additional PayOvertime(L7)1751751751754
Salaries(L8)Ex Staff2252252252255Salaries(L8)
Ex Staff3253253253256Salaries(L8)Ex Staff4104104104107Salaries(L8)
NE Saff1101101101108Salaries(L8)NE Saff100100100100
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedI have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedI have a userforms (using multipage) with columns of input textboxes for the user to input.
Multipage1. Page1
Columns of data to input are %
There are 4 columns of 10 rows (therefore 40 textboxes)
I have the following code that will format the input to be seen as % by the user and to be treated as % in the worksheet calculations.
Private Sub TextBox1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, _
ByVal Shift As Integer)
Select Case KeyCode
Case 9, 13
Sheets("Sheet1").Range("rate").Value = TextBox1.Value
With TextBox1
.Text = Format(WorksheetFunction.Substitute(.Text, "%", ""), "0.00") & "%"
Sheets("Sheet1").Range("rate").Value = .Value
End With
End Select
End Sub
Do I have to code this for every textbox? Is there an easier way to do so. Can I create a loop or routine that will pass through all the textboxes and perform the above procedures?
Please let me know because I don't want to undertake a cumbersome exercise of programming this code for each and every textbox.
By the way, page 2 of the multipage, will have textboxes for % entries; textboxes for 0.00 entries and textboxes for $0.00 entries. I have similar code as above for the 0.00 and $0.00 entries and again I'm trying to prevent programming unnecessarily if I somehow could find a way to code a loop to pass through common textboxes for %, 0.00 and $0.00 entries.
Is there any piece of code that will set the Enabled property to True for all objects on a userform? even when the objects' default enabled value is set to False?
View 6 Replies View RelatedI have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies View RelatedI have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
My input data for Pivot table has a column named "Month". The month values are like April 07, April 08, Nov07 in random order for period between Jan 07 to Aug 08.
When I create a pivot Table, this column is sorted alphabetically (April 07 is followed by April 08) but I need it to be sorted in the ascending order with respect to month (April 07 is followed by May 07).
I further use this data to plot a Pivot Chart. There is another issue here. I want to use separate colors for each series. I do not know how to achieve above 2 things.
I have a pivot table that I created and now I want to use the same pivot cache to create another pivot table instance on a different worksheet. how can I do that? My first worksheet gets saved as "OO By buyer" and now I want to create a new worksheet and drop the next pivot there.
View 1 Replies View RelatedI'm not grasping the Pivot Table correctly. I've written code to create a sum of values based on a worksheet. Specifically:LocationIDDeptSum of Hours Worked. Location, ID and Dept are rows. This effectively provides the aggregate values that I need based on the row groupings.Here's where this is falling apart. I need to create a new worksheet based on these values. I assumed the three row values - Location, ID and dept - would be in a hierarchy. It's possible they are, I just can't figure out the object model.
When I loop through the PivotItems collection of the PivotFields("Location"), I get what I need. However, I'm unable to determine how to loop through the child values (just for that location). PivotFields("ID") returns all IDs. I can't figure out how to return only the child entries for each pivot item. GetPivotData hasn't been very useful for this. As far as I can tell, GetPivotData, while its return type is listed as Range, throws an error when more than one cell is returned. Worst case, I suppose I can just parse the data in the DataBodyRange of the pivot table - maybe not, I haven't tried that. I'm hoping there's a way to iterate through these collections, but based on what I've seen from Google searches, there may not be. Does my pivot table need to be rearranged? I suppose I could also just dump this data into a data table
My macro is designed to look at a summary source tab and create a new tab for each unique project number. It then creates a pivot table from five different source detail tabs and filters on the project number. If a tab already exists it selects the tab and moves on to the next project number. There are six pivot tables created for every project.
New data is added each month to the source tabs and I have a macro to delete all pivot tables and the macro will recreate the pivot tables when ran again.
Issue: Running out of resources At work I'm limited to the use of Excel 2010 (32bit) so I'm restricted on 2GB of memory. At home I ran the file successfully (64bit) and it was around 3GB of memory.
My macro creates a new pivot cache for every pivot table where as I'm trying to only use 6 pivot caches in my coding. I kill it half way through and it's around 100+ caches causing unnecessary usage of memory.
Fix / Solution:
Correctly code the vba to only create six caches and code the rest the pivot tables to use that cache.The only difference in the Pivot Tables is that it’s sorted on the Project Number.
Code:
Dim VBAPPPC As PivotCache
Dim VBAAPPC As PivotCache
Dim VBAPRPC As PivotCache
Dim VBAEXPC As PivotCache
Dim VBAMJPC As PivotCache
Dim VBAIVPC As PivotCache
Dim VBAPT As PivotTable
[code]...
1. I am trying to record a macro where I select a Pivot Table. But in the recorded macro "Pivot Table name" is not recorded neither the Pivot Field Property only the Range name is recorded. But on other systems (workstations) these details get recorded. Does this have something to do with excel settings?
2. I uploaded a macro enabled excel file on my company's "sharepoint" the drop down boxes present in the file get populated via a macro in "ThisWorkbook" page but sometimes these drop down boxes don't show any values. What can be the reason for this? Can't share the file because of data security policy of my organization.
I currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
I have two tables: the 1st table consists of date range (From and To) and week number while the other table has only dates.
Example:
1st Table
FROM TO WK
3/27/2009 4/2/200914
4/3/2009 4/9/200915
4/10/2009 4/16/200916
4/17/2009 4/23/200917
4/24/2009 4/30/200918
2nd Table
DATE
03/28/2009
04/11/2009
04/26/2009
Need simple formula that would show a wk number in the 2nd table (2nd column)? I.e 03/28/2009 has wk no. 14, etc.
I have a list of items and their associated quantities, many items appearing multiple times. I need a concise list that summarizes each item and sums all of its quantities.
The obvious solution is a pivot table. However, I update this list frequently and for some reason the pivot table is difficult to update. is there a function or simple vba code that I could put into this workbook that would work better than my unflexible pivot table?
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
View 3 Replies View Relatedif there is a way to display a table as column percentages but have the totals as raw numbers.
View 9 Replies View RelatedI am trying to find a way to count the total number of pivot fields in a pivot table so I can remove ghost pivot items that are no longer in the pivot table data. My code for this subroutine is as follows;
Sub RemoveGhostPivotItems()
Dim ghost As PivotItem
Dim pt As PivotTable
Set pt = ActiveSheet.PivotTables(1)
pt.ManualUpdate = True
For Count = 1 To 10
On Error Resume Next
For Each ghost In pt.PivotFields(Count).PivotItems
ghost.Delete
Next ghost
Next Count
pt.ManualUpdate = False
End Sub
My code makes an assumption that I have 10 Pivot Fields or less. It would be nice to actually know the number of Pivot Fields so my "For Count" Loop would be more efficient. In otherwords;..............
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
