I have this formula: =VLOOKUP(C:C,Sheet2!A1:A10000,1,FALSE)
that I need to put in column A from 1 to 26,xxx. Is there a way to paste that formula in every cell down the column without the part in bold changing? I'm not too keen on hitting ctrl+v over 26 thousand times.
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I'm looking the fill cells in column A to the bottom of my table, however, new information is added to the table on a regular basis and so designating the range as cell numbers won't work. Here's what I have so far: ...
View 9 Replies View RelatedIf A1 has a value of ABC,
A2-A5 are blank
A6 has a value of DEF
A7-A10 are blank.
Is there a formula that will fill A2-A5 with ABC,
look at the value of A6 and see that it is different from A1-A5,
or not blank,
change the fill value to the new value, A6,
then fill down the value of A6 into A7-A10
instead of manually using the fill handle?
I have 2 columns, the second column has some empty cells in the end of the column
What I would like to do is to fill in those empty cells but only as many as the filled-in cells in the first column
(I have already tried the specialcells(xlCellTypeBlanks) but that did not work as the empty cells are not always "blank" as well)
I have been using this code I found awhile back to fill blank cells in a column with the preceding value. but it leaves the very last cell blank. Like this.
A
B
41055182
905182
41054750
905182
[Code] ........
Is there a way to add possibly a "Do until column B is null or """?
Code:
Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer
If Selection.Cells.Count = 1 Then
MsgBox "You must select your list and include the blank cells", vbInformation, "OzGrid.com"
[Code] ........
Is there an easy way that if any cell in column A is blank it can copy the value from the closest non-blank cell above it? I eventually have to export data from a workbook into a database. But I cannot have any cells in column A as null or blank.
1. There are no blank rows, and at least 1 cell in each row has a value.
2. The person who constructed the sheet did not fill in all cells in column A for each row, they imply that if the cell is blank then it belongs to the same value as whatever the cell above it has. Ie, all similar rows are grouped together.
3. Of course, I only need column A filled in for rows that have data in at least 1 of their columns.
4. Simple worksheets with no formulas to worry about.
Additionally, if it is possible to get a macro so I can apply the code to all worksheets in my workbook at once, can I get that too? In the example below (where .... are blanks) I would like A2 to read 'Fruit' and A4 to read 'Meat'
ColA ColB Colc
---- ----- -------
Fruit apple red
.... grape green
Meat ham pink
.... beef brown
How do I make this to work with dynamic range instead running for complete column? For example: Run this code until last active cell in Column A. Column A will always has value so if cell A25 is last active cell in range then this code should stop executing for column R25. So execution of this code would depend on active cell in column A.
Columns("R:R").Select
Dim Cell As Range
For Each Cell In Selection.Cells
If Cell.Value = True Then ' if true do nothing
Cell.Value = ""
ElseIf Cell.Value = False Then ' if false change to Null
Cell.Value = "Null"
End If
Next
I've an excel table containing the list of expenditures of employee. I've to sort the table and use different colors for different employee rows.
How can I do this task using formula? Is this possible?
Please see the attached excel sheet for the sample table and desired output.
I have an exported Excel worksheet1 from the parts database get every Friday. We get RFQ of parts list each week from multi customers about 3000+ parts as they send in MSword, MSoutlook or MSexcel to me I make into Excel worksheet2. I do not like to type in every part into the parts software I have my words for that software Cough Cough. The exported excel speadsheet tells the part numbers, Location, Qty, Price, ETC I would like to take the Excel RFQ list and have it populated from the other speadsheet
SAMPLE
A1 PART number that on both spreadsheet
A2 QTY on both there request and our stock
A3 Price
A4 Location
So want a compare worksheet1 with worksheet2
A1 = A* the populate A2-A4 with worksheet1 data
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies View RelatedI am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present
Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
The result is shown on the Output sheet
Merge Problem - Forum.xlsx
I'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)
=$AC3>=TODAY()
Code:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
I have a formatted budget vs actual income statement that has subtotals in the appropriate spots. I would like to be able to paste over the entire column with updated data, but not write over the formulas. For instance, in one spreadsheet I have the data for the month of June and in another I have the data for the month of July. Both have the same number of rows, but are formatted slightly differently. I want to be able to replace the June data with the July data. My first thought was to lock the cells with the formulas, protect the sheet and then paste over the entire column, but I get the following error:
The cell or chart that you are trying to change is protected and therefore read-only.
To modify a protected cell or chart, first remove protection using the Unprotect Sheet command (Review tab, Changes group). You may be prompted for a password)
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
How do I paste text from a column into a diagonal line of cells (i.e. A1, B2, C3, etc.)? Additionally (and this may be related), how do I get the cursor to move to a diagonal cell after an entry? (as opposed to down or to the side)
View 2 Replies View RelatedI am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx
When doing a normal copy and paste of a formula you get 1 cell added to the formula
ie... a1=b1+c1
when dragged and copied to a2 you get a2=b2+c2
Is there a way to make it add more than one cell so that when the first formula is dragged and copied I would get a2=b17+c17
The actual formula I am doing a copy and paste with is:
=IFERROR(CHOOSE($I$2,'YTD & MTD'!D58,'YTD & MTD'!E58,'YTD & MTD'!F58,'YTD & MTD'!G58,'YTD & MTD'!H58,'YTD & MTD'!I58,'YTD & MTD'!J58,'YTD & MTD'!K58,'YTD & MTD'!L58,'YTD & MTD'!M58,'YTD & MTD'!N58,'YTD & MTD'!O58,'YTD & MTD'!C58),"")
I am needing to copy and paste to the next row but want 'YTD & MTD'D58 to change to 'YTD & MTD'74
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedWhen I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies View RelatedI have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
I have a worksheet with Coulmn A and B , wherein , Column A has a list of values that can be duplicated. Based on the values in Column A, I want to fill corresponding cells in Column B. see the attached.
way to accomplish the same. Tried VLOOKUP.
I am after a macro to insert a column lets say between column A and B. Once column inserted new column B should be filled by a text say "January" but it should be only filled upto the data of column A so if column A has data upto A600 then column B should be filled from B1 to B600.
I tried recording but it fills data upto B65000+.
I am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction
If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If
