Spinner Link Cell Doesnt Change When I Copy And Paste The Row
Jan 24, 2010
I have a Piece of Code that copys a Row in my Spreadsheet and Pastes it underneath the original Row.
The Problem that I am having is that within the Row it Copys there is a Spinner in it. I want the Spinner to be copied also but the Cell that the Spinner is Linked to Says as the Original Cell, it doesnt move Down with the New Row Pasted in.
Here is the code that i have written to Copy the Row and Paste it down a Row.
I would like to copy cells from one worksheet to another, but have the cells that I paste link to the original document. Is there an easy way to do this?
So if I'm pasting from worksheet A into worksheet B, I would like worksheet B to link to worksheet A.
I have a chart where I set lower and upper threshold lines by use of two spinners. It goes awry if you set the upper limit below the lower limit. Is there a way to set the minimum value of one spinner so that it can't go below the maximum value of the second one?
I am having difficulty trying to find a walkthrough or any other information on how to pair a spinner box to a textbox. Preferably I would like it to show 12:00 and move in 15 minute increments and I seem to be hitting many roadblocks and errors.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I have this long macro that among other things copies data from one sheet to another.
Once I finished it I moved it onto a shared drive and now when it is run I get a popup reading: "Update Values: Book3.xls" asking me to seach for a file. I think it is trying to reference this other book that was in the folder where it was origionaly written, however there is no need for it to, its just processing data within the existing workbook... Ive used Ctrl+F and searched through the formulas to find book3 and it doesn't return anything...
the popup occurs at a line that is: "activesheet.paste"
how to undo this reference to another book? is there some way to supress it from looking outside the selected book?
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
I have two worksheets, and when the value in one changes I'd like the value in the other to change as well. Pasting a link doesn't work, because on the "Paste to" sheet I've applied conditional formatting, and it doesn't register a change event when it's a pasted link. I tried running a macro to copy the whole column and paste it on a change event, but that didn't alert the conditional formatting to kick in.
The "Paste From" sheet has dropdowns in column C. The "Paste to" sheet has corresponding dropdowns in column F. So, if someone changes the selection in C3 on "Paste From", I'd like F3 on "Paste to" to change.
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
I have a sheet which autofilters according to a validation list in cell E2 using the code.
I have then used subtotal arrays to calculate the mean, median, max, min and total count for whichever values the filter shows.
What I want to do next is have a code which will select each possible option from the validation list (triggering the autofilter) and copy and paste the values from each dependent formula into a new sheet.
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
i have some code (see below). at the part where it says
If ActiveCell. Offset(0, 9).Value <> "" Then .Fields("Skill_32") = ActiveCell.Offset(0, 9).Value
i want to make this smaller - i have to write this line bout 60 times 3 times over (incresing the numbers as i go ((0, 9..10..11 etc etc and (Skill_32..33..34 etc etc) )) to give you an idea of what im trying to accomplish - im opening and writing to a database but if the cell doesnt contain any info dont update.
Function EditCPS(ByVal StaffNumber As Long) On Error Goto Err_Handler Dim SkillsBuilderDB As Database Dim RSSkillsBuilder As Recordset Dim MySQL As String Set SkillsBuilderDB = OpenDatabase(Worksheets("Adding Data").Range("IV1")) ' database location MySQL = "select * from CPS where StaffNumber=" & StaffNumber Set RSSkillsBuilder = SkillsBuilderDB.OpenRecordset(MySQL) With RSSkillsBuilder .Edit If ActiveCell.Offset(0, 9).Value <> "" Then .Fields("Skill_32") = ActiveCell.Offset(0, 9).Value Else............................................
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
Is there any way (Through settings and/or VBA) to let the spinner function to increment by decimal value? The current setting allows the incremental value of 1.
I am setting up a couple of spinners to control dates. Unfortunately, the maximum value for a spinner is 30000 which is some date in 1986. I need the dates to go from current through 2010.
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have a "cost.csv" file that contains the cost of the toys. The cost is show in $ with two decimal places i.e. $0.75
I created a new MS Excel 2010 workbook file named as "customers.xlsx" that has four columns i.e. Item, Cost, Order, [Total Amount] columns. I used the paste link command and the Cost column data is linked with the cost column in "cost.csv" file.
When I write order quantity in the order column and then try to use the following expression in [Total Amount] column i.e. "Cost * Order" then I received error due to following reason i.e. "Cost is a text value and Order is a numeric value and excel is unable to evaluate the expression." I have done it by first remove the $ sign from cost using RIGHT and LEN FUNCTIONS.
Now I want to change the format of "Cost" column i.e. I want to show the cost in Euro but not in $. Here I am stuck as I am trying to change the format of the Cost linked cell but unable to change it either I applied the new format, the text remains shown $0.75?
Is this the problem as data is coming from .csv file? If it is then how I can accomplish the task?
I have a worksheet that contains data in sheet1 Cells B2:B14. I need to copy this data into the Summary worksheet B2:N2 and to link it so that it updates on the summary Sheet.
When using Paste Special Transpose, it does not allow one to Paste Link. Is there another way to do this besides using a linking formula?
I have a workbook with 3 worksheets (year 2005 data, year 2006 data, and a total data sheet). I used PASTE LINK to display the data from year 2005 and year 2006 on the total data worksheet. The problem I am having is that any blank cells in year 2005 or year 2006 are being displayed as 0 on the total data worksheet. Is there a way to have blank linked cells displayed as blanks? I am working with Excel 2003.
