Conditioning Actions On Cell Error Values
Jun 16, 2006
I wish to perform different actions depending on whether certain errors are present in a cell and I can't figure out how to do it.
Attempt (within some For loop):
othCell = ActiveCell.Offset(-95 - counter, 0)
If othCell = CVErr(xlErrNum) Then conditioncount = 0
This generates a "type mismatch" error. I also tried othCell.value in place of othCell on the second line; I don't really follow the distinction in usage for "value". I've also attempted this with Error 2036 in place of CVErr(xlErrNum). I don't know much at all about VBA!
View 2 Replies
ADVERTISEMENT
Apr 5, 2012
I have , for example, 3 values (1, 2 and 3) in column D which is 10,000 rows long.
Is there a formula that will colour part of each row (say C1 - F1) in a different colour each time where there is a match to value 1, 2 or 3?
View 9 Replies
View Related
Apr 14, 2008
1.- I have in any cell the name of the month ( example :A1 )
2.- In other cell I have to put this words . . " YES" , ( example B02).
3.- I need the cell "A1" fill with a color
a) if in the cell "B2" dont have any word... then FILL the cell "A1" with Yellow color
b) bu if in the cell "B2" I put the word "YES" then do nothing with the cell "A1"
View 9 Replies
View Related
Aug 19, 2013
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
View 6 Replies
View Related
Feb 7, 2014
I am currently using a product formula in a cell and was wondering if I could add a round up/down action to numbers containing decimals? For example, let's say that my cell values are 300, 327.6 and 355.2 after using the product formula. Is it possible for those values to reflect 300, 328 and 355, respectively?
View 5 Replies
View Related
Apr 28, 2009
I am trying to use following codes for a add-in utility so that user can enable or disable logging activity for a given workbook.
My problem is to how to add the following code to a new workbook so that "Loginfo" function could be activated. I have tried some application... based commands but it do not seem to be working.
View 6 Replies
View Related
May 2, 2009
I have made an class and created a file to log when user change value or insert formula in a sheet get recorded in a file C:Logme.csv. The problem is it is recording the value and formula at random i.e in some instances it records the value and in some instances it is not recording the value and formula in logme.csv . I am unable to figure out why this is happening?
View 3 Replies
View Related
Oct 3, 2008
Is it possible to have a conditional cell based on the actions of another cell in a second database sheet.
For example: A single excel file contains two database sheets. If any characters are entered into cell A1 of sheet 2, then cell A1 of sheet 1 turns grey.
View 4 Replies
View Related
Jun 19, 2014
I wish to set 2 different cases (good and normal sales) for a list of data.
During good sales
- fruits can be sold within 4 hours
- Fruits sold off during peak season (Definition of peak season: 2 calendar days before or on public holiday or 10 days before 31st May)
- < 2 fruits per type
Date of public holiday for example: 1 Jan 2014, 18 Apr 2014, 1 May 2014
For normal sales
- fruits only able to sell of the next day
- Sell of on non-peak season
- > 2 fruits per type
Sample file attached.
View 14 Replies
View Related
Feb 11, 2014
I am trying to build conditioning formats for a Financial template.. This is my formula
'=IF(c21<0.1,"RED",IF(c21<-0.01,"BLACK",IF(c21<1,"YELLOW","GREEN")))
It should display the following. I would like to use the icon sets that are color coded. I seem to have some error or overlaps.
GREEN = On track
³1.0
YELLOW = Slightly behind schedule/budget
³0.85 but <1.0
RED = Needs immediate attention
³0.65 but <0.85
BLACK = Needs to be killed or restored
<0.65
View 4 Replies
View Related
Mar 16, 2012
I have a column in a spreadsheet that tells me when we ask for a check. I would like to take another column which has the date of when we receive the check to change colors based on whether it is within 30 days of the "ask for check" column and then another color if it is over 30 days. Let me try to do an example below:
ask for check Date Received
1-10-12 1-30-12 would be blue because it before 30 days
1-1-12 3-1-12 Would be red becaue its over
View 1 Replies
View Related
Dec 17, 2013
Is there any way I can use conditioning formatting on datapoints in a graph, so that if certain points meet the criteria they will appear with another symbol?
Suppose I would like to change symbol on the datapoints exceeding the value 200 in this graph: Graph.jpg
Can I do that?
View 3 Replies
View Related
Aug 1, 2007
Im working on a large workbook with multiple worksheets. Each of these
worksheets has a large amount of data relating to training records. In
particular, the date that an employees certification is due to expire
(eg: 01/02/2007 or 31/09/2009 etc)...(im also in Australia so my date formats may be different).
I need to color code these records with the below logic, eg:
If Cell Date is <Today() = Red Text or Cell
If Cell Date is <18months from Today()+1 = Yellow Text or Cell
If Cell Date is >18months from Today() = No change - leave white
I have basic VBA knowledge, but will be able to work my way through
some of the code that is posted.
It's also key to note that there are multiple 'Blank' and 'Text' Cells
in these worksheets. I only want to apply this code to a cell if it is
populated with a date, is this possible ?? (eg: i only want to change
the color of the dates listed, not the other cells with text and single
numbers).
I have played around with the Conditional Formatting but i will need
more than 3 conditions in the future. I've also attached a small
screenshot of the data for your convenience.
View 14 Replies
View Related
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
View 8 Replies
View Related
Feb 7, 2007
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
View 6 Replies
View Related
Jan 18, 2014
I need to repeat the following two actions one after another therefore I cannot use F4 key
The actions are :
1) select some cells in two rows and colour them yellow.
2) select the last two cells of the rows ans merge them.
these are one after another where F4 will repeat only the 2nd step but I need the 1st step of colouring.
Are there any short cut keys or method or recording to repeat the above steps when necessary.
View 1 Replies
View Related
Jul 17, 2009
I have a list of petroleum accumulations with three types of data: Reservoir depth, Net Pay and Gas-oil ratio. for each accumulation, the number of reservoirs within each can vary. So I may have a accumulation with only one set of those stats, or an accumulation with 20.
I need the program to go down an alphabetized list (8000 entries long) and after every unique accumulation name average the values of the stats(which are in three separate columns) then put it in one row perhaps beginning in Column M or another sheet. So that I have a list of accumulations with the average of those stats, one entry per accumulation name.
View 5 Replies
View Related
Jul 3, 2014
I need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] .....
View 2 Replies
View Related
Jul 15, 2014
I am working on trying to make a macro I wrote run faster, and I understand that one way to do this is to stop certain actions from occurring. However, I am having a hard time understanding what stops what, specifically among these:
[Code] ......
View 2 Replies
View Related
Sep 10, 2012
This Coding is correct for CheckBox49. This code Changes the Color of one Cell from Black to white and the cell below it from white to black...(its a dipswitch) when the check box is checked... When its unchecked it does the opposite....
Code:
' ACM 1 Switch 1
Private Sub CheckBox49_Click()
If CheckBox49.Value = True Then
Range("AC24").Select
With Selection.Interior
.Pattern = xlSolid
[Code] ........
Now what needs to happen is this.... I'd Like to have this Happen if checkx49 is checked...
Code:
Range("A1,K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlSolid
[Code] .......
If Checkbox49 is unchecked do this... Put in D26 Reader Name? in Italics.
Code:
Range("K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlNone
[Code] .........
Also...what ever information is entered in D23.
Put that in F50 with RDR at the end...
Whats in D23 Put in F51
Whats in D23 Put in M50 and concatenate with a space from cell U49
Whats in D23 Put in M51 and concatenate with a space from cell Y49
Lastly code to select K50, K51, R50, and R51...=Len whats in F50, F51, M50, and M51 when the box is checked...and dont len when the box is unchecked.
View 6 Replies
View Related
Oct 4, 2009
I need to insert code into an existing macro that does each of these two similar actions:
If a specified word is in the heading (row 1 cell) of a sheet, DELETE that column
If a specified word is in the heading (row 1 cell) of a sheet, BOLD that column.
View 9 Replies
View Related
Sep 20, 2007
Is there a structure inside of Excel which keeps track of all the actions taken by a user (something that would presumably be used to allow for an undo sequence)? If so, is there a way to get access to it?
View 2 Replies
View Related
Jan 15, 2014
I want know the formula for below issue. I have number of of actions done for each day for a month or more.
If I select a particular period for example 01jan14 to 10jan14 i want to get all actions done in this period.
View 2 Replies
View Related
Dec 30, 2009
I have a series of macros altering various workbooks and sheets. They're numbered Step1, Step2, etc. In my Step5 I have a series of Case statements in a macro, and I don't know how to get it to do what I want next. I have NOT tried running this code yet, and I'm sure I have something(s) wrong in it.
1) If the selection in DstWbk, sheet "Steps", is "01DSP" through "11DSP" the macro needs to delete specific columns in the SrcWbk, and then move to the next step (6).
2) If the selection in DstWbk, sheet "Steps", is "*DSP" the macro needs to go directly to the next step (6)
3) If the selection in DstWbk, sheet "Steps", is anything else the macro needs to flash a generic "No Data found" message and move on to Step7.
The part of the code that's throwing me begins at 'Select only the specific regional data' and ends at the "Case Else MsgBox"
View 3 Replies
View Related
Sep 26, 2013
I'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.
Is it possible do this with a Worksheet_Change routine? If so, how?
View 7 Replies
View Related
Jun 15, 2009
Macro: the system monitors changes to the spreadsheet and then performs actions accordingly. Example: If the value of column c = Bug, then it sets the value of G to Celeste and Column H to Kewill.
Could this macro be changed so that instead of having to enter "Celeste" in this code, it could set the value of column G to the value found in H5 on the sheet?
I tried replacing "Celeste" in the code with H5 but it did not work.
Private Sub Worksheet_Change(ByVal Target As Range)
'Declare variable
Dim iCol As Integer
'Look at the column number of the changed cell (Target)
Select Case Target.Column
'Column C
Case 3
Select Case Target.Value
'if "Bug" set iCol to 3 (Red)and change value of column G to "Celeste" and Column H to "Kewill"
Case "Bug": iCol = 3
Target.Offset(, 4).Value = H5
Target.Offset(, 5).Value = "KWL"................
View 9 Replies
View Related
Dec 8, 2006
I have written a macro which references to several different sheets and cells therein. The macro is assigned to a command button on 'Sheet 1'. When I click the command button, the screen flickers and the user can see the macro running all the commands I have written. Is there a way of stopping this - maybe replacing it with a static screen view whilst the macro runs?
View 3 Replies
View Related
Feb 25, 2009
where exactly to add the code under Tools > Macro > VB editor.
My version: Office XP Pro ("2002")
The first code I need should be simple. I want Excel to copy cut delete files from the hardware, using data from a workbook.
There are 3 sheets:
1. "Names" - contains picture file names (without the JPG extence) in one column,
2. "From" - contains a cell with the original path to copycutdelete from
3. "Target" - has a cell with the target folder path (in case of copying/moving).
I made it in 3 sheets for making it user-friendly, since unskilled users will use the method.
I need to have 3 hyperlinks in the first sheet: "Move (cut)", "Copy", and "Delete", and by pressing the matching VB code eill be activated.
The second code should output (and print, if possible) data from a line to a pre-defind sheet.
Let's say there are 4 columns: picture file name, name of photographer, description of the photo, and the date it was taken.
There will be in the end of every line a cell with a hyperlink called "Output photo details" to output the data to specfic cells in the Print sheet (e.g. the date goes to D7, the name goes to A3, etc.). An important thing I wanna output is the picture itself (like from "Add > Picture" ment, in a location I define in the code.
View 9 Replies
View Related
Apr 2, 2009
I have a workbook that is used to track overtime hours worked through the year. I've received some help from users on this forum, and others, to create the necessary macros and formulas to allow a supervisor to make use of the form; however, the workbook is also used to track those that wish to volunteer to work overtime each weekend. The sheet has a list of names for the employees on each shift, then a column to allow a "Y" to be placed under the date - designating them as a volunteer for any overtime available. I've found this spreadsheet (attached - from this site) that will allow individual users to access the workbook and have unique passwords for each. I don't completely understand how it works, but I feel it may be a start to getting what I want.
Essentially, once the user selects their name and inputs their password, I'd like the workbook to be opened and then allow them to only manipulate the row associated with their name. That row will change from week to week, so specific numbers will not be able to be used, but their name will be the same as the name used in the logon.
I feel like I'm asking for a lot here, so just some initial guidance on whether this type of thing is possible would be an acceptable answer.
View 9 Replies
View Related
Jul 14, 2009
I've got a small problem using VLOOKUP. If the function does not find a value, it returns #N/A. I would like it to say "Not Installed" instead.
The same goes for when VLOOKUP returns a zero - I would like it to return "Installed" instead. Since I've got a great number of rows, I would need an efficent way to change this.
View 9 Replies
View Related
