I am working on trying to make a macro I wrote run faster, and I understand that one way to do this is to stop certain actions from occurring. However, I am having a hard time understanding what stops what, specifically among these:
[Code] ......
I need to repeat the following two actions one after another therefore I cannot use F4 key
The actions are :
1) select some cells in two rows and colour them yellow.
2) select the last two cells of the rows ans merge them.
these are one after another where F4 will repeat only the 2nd step but I need the 1st step of colouring.
Are there any short cut keys or method or recording to repeat the above steps when necessary.
I have a list of petroleum accumulations with three types of data: Reservoir depth, Net Pay and Gas-oil ratio. for each accumulation, the number of reservoirs within each can vary. So I may have a accumulation with only one set of those stats, or an accumulation with 20.
I need the program to go down an alphabetized list (8000 entries long) and after every unique accumulation name average the values of the stats(which are in three separate columns) then put it in one row perhaps beginning in Column M or another sheet. So that I have a list of accumulations with the average of those stats, one entry per accumulation name.
I need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] .....
This Coding is correct for CheckBox49. This code Changes the Color of one Cell from Black to white and the cell below it from white to black...(its a dipswitch) when the check box is checked... When its unchecked it does the opposite....
Code:
' ACM 1 Switch 1
Private Sub CheckBox49_Click()
If CheckBox49.Value = True Then
Range("AC24").Select
With Selection.Interior
.Pattern = xlSolid
[Code] ........
Now what needs to happen is this.... I'd Like to have this Happen if checkx49 is checked...
Code:
Range("A1,K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlSolid
[Code] .......
If Checkbox49 is unchecked do this... Put in D26 Reader Name? in Italics.
Code:
Range("K50,K51,R50,R51").Select
Range("R51").Activate
With Selection.Interior
.Pattern = xlNone
[Code] .........
Also...what ever information is entered in D23.
Put that in F50 with RDR at the end...
Whats in D23 Put in F51
Whats in D23 Put in M50 and concatenate with a space from cell U49
Whats in D23 Put in M51 and concatenate with a space from cell Y49
Lastly code to select K50, K51, R50, and R51...=Len whats in F50, F51, M50, and M51 when the box is checked...and dont len when the box is unchecked.
I am currently using a product formula in a cell and was wondering if I could add a round up/down action to numbers containing decimals? For example, let's say that my cell values are 300, 327.6 and 355.2 after using the product formula. Is it possible for those values to reflect 300, 328 and 355, respectively?
View 5 Replies View RelatedI need to insert code into an existing macro that does each of these two similar actions:
If a specified word is in the heading (row 1 cell) of a sheet, DELETE that column
If a specified word is in the heading (row 1 cell) of a sheet, BOLD that column.
Is there a structure inside of Excel which keeps track of all the actions taken by a user (something that would presumably be used to allow for an undo sequence)? If so, is there a way to get access to it?
View 2 Replies View RelatedI have made a series of of udf's and used them without a problem in my worksheet. One of the variables used by udf's, " commission " is a named range on the "vrs" sheet in my book. All was working fine, all the udfs updated whenever i changed the value of "commission" by directly entering a new value in the cell referenced by "commission" I then wrote sub to call an input box wich collected a value for commission and put it in the ranged cell. Since then, of the 4 columns of data that commission acts on only 3 now update automatically. The recalcitrant 4th column will only update if I select the cell, place the cursor anywhere in the formula and press enter.
View 3 Replies View RelatedI want know the formula for below issue. I have number of of actions done for each day for a month or more.
If I select a particular period for example 01jan14 to 10jan14 i want to get all actions done in this period.
I have a series of macros altering various workbooks and sheets. They're numbered Step1, Step2, etc. In my Step5 I have a series of Case statements in a macro, and I don't know how to get it to do what I want next. I have NOT tried running this code yet, and I'm sure I have something(s) wrong in it.
1) If the selection in DstWbk, sheet "Steps", is "01DSP" through "11DSP" the macro needs to delete specific columns in the SrcWbk, and then move to the next step (6).
2) If the selection in DstWbk, sheet "Steps", is "*DSP" the macro needs to go directly to the next step (6)
3) If the selection in DstWbk, sheet "Steps", is anything else the macro needs to flash a generic "No Data found" message and move on to Step7.
The part of the code that's throwing me begins at 'Select only the specific regional data' and ends at the "Case Else MsgBox"
I have a list of 500 values calculating when a plane will stop on a carrier deck, i have IF formulas for each row saying whether the plane has stopped or is slowing. At some point the plane stops then this column reads "stopped". However i would like to see when this point is without having to scroll down 400 rows to find where this column changes, basically i want this:
=IF(L8="Stopped",D8,IF(L9="Stopped",D9,IF(..... 500 times over, however this wont fit in the box!.
What i need is a cell that says when the force stopping the plane is greater/equal to the total energy of the plane, the plane has stopped.
I recently got a new laptop. I now have excel 2007 and vista. The debug step key, F8, does not work. It toggles out of excel when pushed. If I start the procedure in the debug menu, the SHIFT - F8 will step through though. Is there a setting I am missing? It must have somehting to do with VISTA since in the debug section it says to use F8.
View 3 Replies View RelatedI'm using a Private Sub Worksheet_Change(ByVal target As Range) macro on Worksheets(2) to perform certain actions when a selection from Worksheets(1) is pasted to Worksheets(2). Before ending the Worksheet_Change sub I'd like it to deselect the copied selection on Worksheets(1). I've tried to do this by selecting Worksheets(1) and moving the cursor, but VB ignores the "With Application.Worksheets(1)" instruction. Removing "Private" from the sub heading makes no difference.
Is it possible do this with a Worksheet_Change routine? If so, how?
I am trying to use following codes for a add-in utility so that user can enable or disable logging activity for a given workbook.
My problem is to how to add the following code to a new workbook so that "Loginfo" function could be activated. I have tried some application... based commands but it do not seem to be working.
I have made an class and created a file to log when user change value or insert formula in a sheet get recorded in a file C:Logme.csv. The problem is it is recording the value and formula at random i.e in some instances it records the value and in some instances it is not recording the value and formula in logme.csv . I am unable to figure out why this is happening?
View 3 Replies View RelatedMacro: the system monitors changes to the spreadsheet and then performs actions accordingly. Example: If the value of column c = Bug, then it sets the value of G to Celeste and Column H to Kewill.
Could this macro be changed so that instead of having to enter "Celeste" in this code, it could set the value of column G to the value found in H5 on the sheet?
I tried replacing "Celeste" in the code with H5 but it did not work.
Private Sub Worksheet_Change(ByVal Target As Range)
'Declare variable
Dim iCol As Integer
'Look at the column number of the changed cell (Target)
Select Case Target.Column
'Column C
Case 3
Select Case Target.Value
'if "Bug" set iCol to 3 (Red)and change value of column G to "Celeste" and Column H to "Kewill"
Case "Bug": iCol = 3
Target.Offset(, 4).Value = H5
Target.Offset(, 5).Value = "KWL"................
I wish to perform different actions depending on whether certain errors are present in a cell and I can't figure out how to do it.
Attempt (within some For loop):
othCell = ActiveCell.Offset(-95 - counter, 0)
If othCell = CVErr(xlErrNum) Then conditioncount = 0
This generates a "type mismatch" error. I also tried othCell.value in place of othCell on the second line; I don't really follow the distinction in usage for "value". I've also attempted this with Error 2036 in place of CVErr(xlErrNum). I don't know much at all about VBA!
I have written a macro which references to several different sheets and cells therein. The macro is assigned to a command button on 'Sheet 1'. When I click the command button, the screen flickers and the user can see the macro running all the commands I have written. Is there a way of stopping this - maybe replacing it with a static screen view whilst the macro runs?
View 3 Replies View RelatedI'm looking for a simple solution to pause a VBA loop and then restart it from where it stopped.
Is it with a boolean value, i dont know the code.
I have been working on a workbook, and all of a sudden, my keyboard no longer worked in Excel. No shortcuts, no CTRL+C, no CTRL+V, no CTRL+S, no CTRL+A, no F12 to save, no letters, no numbers.... The only button that is working is my ALT key, and I use the other letter keys just fine to navigate after pressing ALT.... But that's it!
I have still been able to work on it because I can still write in Word, and I can still write more code in the Visual Basic window, and I can still click the buttons I create under the Developer... but it's still frustrating to not be able to type a thing in any of the cells, formula bar, or be able to use any of the shortcuts. And now when I tried to close it, I can still select everything else, and I can close this workbook, but it won't close Excel.
I have a simple macro that from Outlook Express sends emails, with the last code line to mimic ALT+S on the keyboard to send the message
Application.Wait (Now + TimeValue("0:00:02"))
Application.SendKeys "%s"
Yesterday I needed to install some new software that required at the end reinstalling of Microsoft Redistributable 2005. Not sure if for that reason but now the last line (the SendKeys) is not sending the email automatically anymore. What happens is:
-the email message windows pops up but is not being sent unless i do it manually (if i get rid of the two seconds pause ahead of that)
-have a VB error message that takes me before the SendKeys line (if I keep the two secs wait ahead of that)
It looks to me that either:
-the pc is not active anymore on the email message therefore the SendKeys doesnt work
-somehow the instruction finds the "door" shut by something else
-worse of all, the software has messed up with those send keys commands (tried to reinstall it but to no avail)
All my macros have suddenly started crashing Excel 2007 when I try to run any one of them. I can record a new macro but even that newly recorded macro will crash Excel.
Service Pack 1 was downloaded and installed by Windows Update two days ago and I had successfully run macros after SP1 was installed.
Today, it's a no go and I'm at a loss as to what may have caused this problem. I have not installed any software lately, other than the Windows updates on patch Tuesday.
This is on a Vista Home Premium machine.
When I try to run a macro, Excel crashes with this info:
why my Macros have suddenly stopped working for no apparent reason?
For Example - one macro would run when a Cell in Column A was selcted. It would trigger a macro to save the workbook.
I'm not giving details of what the specific macros do as it's more of a question as to why macros in a workbook just suddenly cease to function.
I use this formula in a depreciation schedule to determine months in service.
=ROUND(((DAYS360(G12,$Y$1,FALSE)/30)),0)
G12 is my start date and $Y$1 my end date. Every month I update this to the current period end date and up until now, it has recalculated.
Today, I changed $Y$1 from 1/31/2014 to 2/28/2014. The cells with that didn't update. For giggles, I entered in previous dates, and it worked fine.
Is it because 2/28/14 is a future date? I tried 2/24/14 with no joy...
What could make this line of code stop working. It has worked for weeks, and just yesterday it stopped working. :x
ActiveWorkbook.Sheets("Email").UsedRange.AutoFilter Field:=2
The sheet is unprotected, and events are enabled. I don't know of anything different than before. What do I look for that would not allow this code to run?
I am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
'Copy SUSD data to datbase
Sheets("Summary - SUSD").Select
Range("SUSD_DATA").Select
Selection.Copy
Sheets("SUSD Database").Select
Range("b6" & LastRow + 1).Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
' Sort Data..............
where exactly to add the code under Tools > Macro > VB editor.
My version: Office XP Pro ("2002")
The first code I need should be simple. I want Excel to copy cut delete files from the hardware, using data from a workbook.
There are 3 sheets:
1. "Names" - contains picture file names (without the JPG extence) in one column,
2. "From" - contains a cell with the original path to copycutdelete from
3. "Target" - has a cell with the target folder path (in case of copying/moving).
I made it in 3 sheets for making it user-friendly, since unskilled users will use the method.
I need to have 3 hyperlinks in the first sheet: "Move (cut)", "Copy", and "Delete", and by pressing the matching VB code eill be activated.
The second code should output (and print, if possible) data from a line to a pre-defind sheet.
Let's say there are 4 columns: picture file name, name of photographer, description of the photo, and the date it was taken.
There will be in the end of every line a cell with a hyperlink called "Output photo details" to output the data to specfic cells in the Print sheet (e.g. the date goes to D7, the name goes to A3, etc.). An important thing I wanna output is the picture itself (like from "Add > Picture" ment, in a location I define in the code.
I made a spread sheet last year that used various COUNTIF formulas that referenced other cells. =COUNTIF(I40:ER40,"A") It worked perfect.
I copied that spreadsheet to use for this year. I cannot get this formula to work. I have reentered in various locations and forms, but to no avail. If I enter the data and then enter the formula, it works.
However, if I enter the formula first and then enter the data (which I will do over the course of the year) it does not work. I even tried to reconstruct all of this in a brand new spread sheet and it still is not working, although last year's spread sheet still works.
I have a Macro button in my Excel Spreadsheet, every time I close the spreadsheet it gives me this error "Microsoft Excel Stopped Working" .
I have attached Spreadsheet to show example : Inventory List.xlsm