Copy And Paste Row From Different Tab Based On 2 Different Criteria Assign To Button
Feb 13, 2014
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
View 3 Replies
ADVERTISEMENT
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Nov 3, 2009
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
End Sub
View 4 Replies
View Related
Nov 12, 2008
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
View 14 Replies
View Related
Jan 13, 2010
6 worksheets ("Monday" ,"Tuesday" etc)
1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
View 12 Replies
View Related
Jul 19, 2007
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
View 2 Replies
View Related
Jan 22, 2008
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
View 4 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Jun 24, 2014
I need to write an excel function/macro/code to assign yes or no to a cell if the Description fits a certain category. I have attached a sample workbook and will explain what I mean.
In the sample workbook, there is data on a company. This included a unique ID, city, state, and description. What I want to do is fill out the yes/no column. So if a particular company has 2 of the 4 necessary "Descriptions", then column G will return yes, otherwise No. It must return yes for a particular company/ID if 2 of the "Descriptions" are "Sale", "Service", "Business", or "Par". I only want it to count at least two unique descriptions.
For example, in the sample workbook, Company A has all 4 of the necessary descriptions, thus everything in column G for this specific client should be yes. For Company B, only 1 of the 4 descriptions matches, so it returns No for all Company 2 columns. Company C has 2 of 4, so it returns yes for these columns. Note, it doesn't matter for Company C that "Business" was listed twice. It only needs to count the first unique time that description occurs.
View 6 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Feb 25, 2014
In sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
View 5 Replies
View Related
Aug 23, 2013
I am trying to develop a system to allow me select different parts from multiple sheets and then add them into a bill of material on a separate sheet.
[URL] ...........
I have written some VB script the best I can and it includes a 'commandbutton' to make it easy for the user of the workbook to use.
This is how it works:
Go to 'Step 1 - Manifold 8640' tab and highlight one of the yellow cells.Once you have selected a yellow cell, you then click the 'select' button above.The value (along with other values) are copied to the 'Smart Calc' sheet.Then you go to 'Step 2 - Gland Plate' tab, select a yellow cell, click the 'Select' button.Notice how the 'Step 2 - Gland Plate' value is entered into a different group in the 'Smart Calc' sheet - this is great................BUT
The issue I am having is:
If the user goes to 'Step 1 - Manifold 8640' tab, highlights the desired yellow cell then presses the 'Select' button twice, it will add two lines of data in the relevant 'Step 1 - Manifold 8640' section....This is ok.But when the user clicks a third time, the 'Step 1' data will overflow into the 'Step 2' section of the 'Smart Calc' tab...because the script tells the data to look for the next available line to write to. This is what I am trying to avoid!
Instead, i would like a message box to popup to indicate to the user that they cannot add anymore data into into the 'Step 1' or 'Step 2' sections of the 'Smart Calc' tab until they clear the data from within the relevant section in 'Smat Calc'.
I would like to set limits on where each 'Step 1' or 'Step 2' data is written to the 'Smart Calc' sheet (so it is within its relevant section). As you can see the script basically looks for the next available cell but this isn't really good when the data 'overflows'.
Note that you are able to highlight the yellow cells in the 'Smart Calc' tab and press the delete key, it will delete the data to clear the line. That is how i designed it to work so if the user makes a mistake they are able to just delete the relevant line and enter new data.
View 1 Replies
View Related
Dec 10, 2009
I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......
View 9 Replies
View Related
Feb 17, 2010
Basically a VBA code for a Command Button which when being pushed looks for the last cell being used in column A and copy/pastes rows 1 to 19 right in the next cell where this X (just an example..X could be anything basically) would be found. My columns go up to BU.
View 9 Replies
View Related
Jun 4, 2008
I am trying to copy and paste Row by cell value. It is working fine when I am copying row from one worksheet by comboBox value to other worksheet. But problem is after updating data when I want copy back by cell value, it is showing "Run-time error '1004'" - Application-defined or Object-defined error. the code below is working fine
Private Sub CommandButton1_Click()
Dim sfind As String
Dim cl As Range
'check for a value & show message
Sheet = "Data"
Sheets(Sheet).Select
Application. ScreenUpdating = False
If Me.userIDCombo.Value = "" Then 'the textbox in userform
Me.userIDCombo.SetFocus
MsgBox "Please enter a Name to Update."
' show message if no Name Selected
Exit Sub
Else
sfind = Me.userIDCombo.Value.........................
View 2 Replies
View Related
Aug 5, 2014
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
View 4 Replies
View Related
May 8, 2008
I need to be able to search column y and rows 5-100 and where cells contain "A" copy and paste entire row to row 110. I am guessing it is really simple but I am obviuosly missing something
View 3 Replies
View Related
Aug 22, 2014
I want to add buttom double border to cells in rows, based on data in column A via VBA,
I have a title in A1 called PO, every PO have variable numbers of rows. so i want buttom double borders for each group of PO.
I added an attachment of "Before and after" example.
View 2 Replies
View Related
Feb 18, 2012
I have a problem and I hope that it can be solved using a macro. Basically, I have a set of data in column A and B in sheet(1):
A
B
1NameDate
2JOY12/09/11
3MAR12/12/11
4DAVID12/12/11
5
I have another set of data in Sheet(2):
A
B
C
D
E
1NameDatesalary
CHARACTERRATINGS
[code].....
basically, I would take into consideration the names and dates in sheet(1) and if it matches sheet(2) then it would then paste their salaries, characters and ratings into sheet(1).
View 9 Replies
View Related
May 10, 2014
How can I execute two macros with one button press?
the sub names are CDO_Text and CDO_Mail
View 2 Replies
View Related
Jul 3, 2014
I need to assign two actions to a one button.
1. action: Copy Column A, paste to Column C
2. Write time&date into G5
I am only capable of doing one button for each action using the macro recorder and simple code:
[Code] .....
View 2 Replies
View Related
Aug 26, 2007
I have had the following written for me
Private Sub Worksheet_Change(ByVal Target As Range)
For Each Cell In Target
If Cell.Column = 4 and Cell.row >= 17 and Cell.row <= 20 Then
If Cell <>"" Then
Cell.Offset(0, 3) = Date
Else
Cell.Offset(0, 3) = ""
End If
End If
Next Cell
End Sub
I wish to assign that code to a button on sheet 1.
I normally just right click the buitton and assign the macro, but on this occasion I can't. I think it's to do with it being a private sub.
View 14 Replies
View Related
Apr 3, 2008
While practicing writing macros and studying the VBA code, I decided to add a button to run the macro, something I've done many times in the past. But the option to associate the new button with any macro doesn't seem to be available.
A. How can I assign a new button to a macro
and
B. How can I make the association in VBA?
View 9 Replies
View Related
Jun 19, 2008
1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
View 4 Replies
View Related
Nov 22, 2005
I have to modify 2000 files so I've written a master file that loops through a list, importing modules and forms into the 2000 files it opens and closes. On each file when open it draws a button on worksheet. I then want to assign a macro to the button called "ModifyMenu" . The code for 'Modifymenu' is imported into file_01.xls and is a unique name. It does not exist is master.xls, so no confusion.
The code for assigning the code is as follows :
Windows("file_01.xls").Activate
ActiveSheet.Shapes("Button").Select
or
Workbooks("file_01.xls").Sheets("1 B").Shapes("Button").Select
Then
Selection.OnAction = "ModifyMenu"
(This links to master.xls!ModifyMenu not file_01.xls)
Selection.OnAction = "file_01.xls!ModifyMenu"
(This fails, runtime 1004. 'Unable to set the OnAction property of the button class)
Selection.OnAction = ThisWorkbook.Name & "!ModifyMenu"
(This links to master. MAster is the active code even though 'file_01.xls' is the active worksheet)
Variations on the above seem to result in the same 1004 error or linking back to master regardless of the fact I'm trying to link to file_01.xls.
View 6 Replies
View Related
Oct 22, 2009
I have a start page in the beginning of my excel workbook.
This is where i want to assign a macro to a search button.
I want the macro to search the entire workbook but only in a certain block on each worksheet.
View 9 Replies
View Related
Jun 8, 2006
I am creating controls on a Userform on the fly. A shortened example of my code to create a button is below:
Set BtnEdit = .Controls.Add("Forms.CommandButton.1", "BtnEdit", True)
With BtnEdit
.Left = 220
.Top = 85
.Width = 50
.Font.Underline = True
.Caption = "Edit"
.Enabled = True
End With
What I want to do is assign a pre-existing sub-routine to the button, at the same time as I create it. I have tried using
.OnAction = Mysubroutine
View 4 Replies
View Related
