How To Create Slider On Rows Or Columns

Feb 6, 2014

slider.JPG

What is this and how do I create it?

View 2 Replies


ADVERTISEMENT

Combining Columns To Create New Rows Not Concatenation

May 22, 2014

RCA Page for forum.xlsx

I'm trying to get entries from one table to appear in another. The first table is like this:

DateDate
Customer Column1
Description Column1
Customer Column2
Customer Description2
Created By

The table I want to put the data into looks like this:
Date
Customer
Description
Created By

View 2 Replies View Related

Create Limited Number Of Columns/rows

Dec 11, 2008

is it possible to create or customize a worksheet with 30 columns and 120 rows only.

View 4 Replies View Related

How To Create Macros Buttons To Add Or Delete Columns And Rows

May 21, 2014

So I'm trying my hand at creating VBA buttons and functions that do the following.

Button 1 :
to add a column with every click. The button will create one extra column. So by design there will be at least 1 column. Example if the button is clicked twice it will create 3 columns. I just need a buffer col. (contains no data)

Button 2 :
to delete empty columns leaving only one empty buffer column. That is this button will purge empty columns except the buffer column. OR if ALL the columns are filled, Button2 will create the buffer column.

Eg. I click Button 1 three times. It creates four columns. I only fill two columns. When Button 2 is clicked it will delete all the empty colums except the buffer column. OR I fill in all four columns, there is no buffer column, when I click Button2 it will insert the buffer col.

Button 3 :
to add a row with every click. The button will create one extra row. So by design there will be at least 1 row. Example if the button is clicked twice it will create 3 rows. I just need a buffer row. (contains no data)

Button 4 :
to delete empty row leaving only one empty buffer row. That is this button will purge empty row except the buffer row. OR if ALL the columns are filled, Button4 will create the buffer column.

Eg. I click Button 3 three times. It creates four rows. I only fill two rows. When Button 4 is clicked it will delete all the empty rows except the buffer rows. OR I fill in all four rows, there is no buffer rows, when I click Button4 it will insert the buffer row.

In the sample file there are six columns filled with data. The 7th col is empty(the buffer column). The column after that calculates the average of data in filled columns. There are eight rows with data and the ninth row is the empty buffer row.

The "add" buttons must be able copy the format/formula of the column/rows BEFORE the buffer colums/rows and insert it before the buffer column/row.

View 3 Replies View Related

Using Slider Within Userform - How To Set Values / Parameters

Feb 11, 2014

I have googled and found that you can add a slider within a userform, but how to set the values/parameters.

The aim is to have the slider max @ 5.00% with increments of 0.5% with starting value of 0.05%.

I have tried the properties section and it does not like any of my inputs.

View 1 Replies View Related

Customized Scrollbar / Slider To Select Value?

Feb 17, 2012

I have been using a scroll bar in my project to select a value from 0 - 3

Is it possible to have a customised slider (whether a form control or something created from scratch) whereby the numbers 0 1 2 3 are displayed in a grey, red, yellow and green box respectively adjacent to eachother and a slider can be moved over the top to select a value?

View 7 Replies View Related

Macro: Create Named Ranges. Unknown Columns/Rows

Sep 9, 2006

I need to make named ranges from an unknown number of columns(at least 1) each with an unknown number of rows. Each column has the name of the named range as the first row, and then a variable number of rows containing part numbers.

I can do it 1 by 1, but id rather do it in a loop so that blanks dont cause errors. there will be different people using versions of this sheet with different model/part number information What i've tried: Count number of colums with row 1 containing data (11 max, which is more than will ever be used) add into array(I know i dont really need to add into the array, but i might use it later for some other code). The problem i'm having is finding the range of rows that need added to the named dynamic range and adding it.

modelcount = Range("G7") 'G7 (for now) contains =COUNTA(H1,I1,J1,etc)

For i = 1 To modelcount
Redim Preserve Models(0 To i)
Models(i) = Cells(1, i + 7)
Range1 = Cells(2, i + 7).Address(xlA1)
lastRow = Cells(rows.Count, i + 7).End(xlUp).Row
Range2 = Cells(lastRow, i + 7).Address(xlA1)
Reference = Cells(2, i + 7).Address(xlA1)
ThisWorkbook.Names.Add Name:=Models(i), _
RefersTo:="=OFFSET(Reference,0,0,counta(Range1:Range2),1)", Visible:=True
Next i

This gets me the range i need, but doesnt create the named range properly. If i go to insert>names>define, the named ranges are created, but they dont relate to the data in any columns. It shows the variable names rather than the cell range the variable represents.

View 2 Replies View Related

Create Column List Out Of Table (rows And Columns) While Removing Blanks

May 26, 2014

I am trying to create a straight column list that can take the rows and columns of a table, and list only the nonblank items. The formula I am using only seems to work with one column, not multiple.

Formula:

[Code] .....

View 12 Replies View Related

Transpose (switch) Rows Into Rows And Columns Into Columns?

Jul 28, 2013

i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).

View 14 Replies View Related

How To Create Duplicate Rows Of All The Existing Rows

Jun 26, 2013

Everyone always want to get rid of duplicate rows.

Is it possible to create duplicate rows of all the existing rows?

View 5 Replies View Related

Need To Create 2 Columns From One

Apr 26, 2009

I have a spreadsheet in which I want to extract or create two different columsn one will have the name of the store and the other will have the SKU item number. the way it is right both are on same column. I have attached a sample.

View 9 Replies View Related

Moving Data From Rows To Columns And Delete Repeated Rows

Apr 16, 2014

removing duplicate rows and move other data frm rows to columns.xlsx.

I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.

see the desired result tab in the sheet to get an idea of what I am looking for as the end result.

Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.

View 5 Replies View Related

How To Create Loop Through Among Columns

Apr 30, 2012

i would like to create loop throug among columns, is xlup or xldown methods will make sensne ?

View 2 Replies View Related

Getting Rows To Columns Macro Skipping Blank Rows

Dec 28, 2011

I have this in Column A, with about 120 entries:

Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1

Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2

Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3

I want this:

Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3

all the way down.

I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.

View 5 Replies View Related

Move Rows Of Data From Several Columns But Not All Columns?

Dec 18, 2013

Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).

View 1 Replies View Related

Turning 64 Rows And 18 Columns Into One Row With 1152 Columns

Aug 10, 2008

I have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).

In other words, my individual data files look something like this:

Participant 1 (title of data file)

Trial/var1/var2/var3
1 55 43 65
2 54 43 56
3 33 23 56

and I want to compile all the data into a single file that looks like this:
Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ...
1 55 43 65 54 43
2 . . .

I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.

View 9 Replies View Related

Create 1 Long List From 3 Columns?

Jan 4, 2014

My data is set up as

A
B
C
1
A
B
C

[Code]....

How Can I make that data appear as

A
1
A
2
B

[Code]...

Where is takes the row and keeps transposing it down 3 lines at a time?

View 10 Replies View Related

Create Error Message When Two Columns In The Same Row Are Used?

Mar 26, 2014

I'm trying to create a situation where the user would get an error message when they tried to enter numbers in two specific columns in the same row. That is, in row C they can only enter a number ( 1 or 2) into C5, C6 or C7. If they enter a number into two of these cells, I want an error to appear. They would have to stop and correct the error.

I've tried two scenarios with no luck:

1. I've data validation where I did SUM(C5:C7) and hid the answer in C8. I then tried to get a data validation to display an error code when C8 exceed 2. This didn't work.

View 3 Replies View Related

Create Separate Columns From One Column

Jun 27, 2009

I have a spreadsheet with these columns:Group_Name
Contact Name
Company Name
Contact ID

Situation:
The Group Name Column has the name of the group that the Contact Name is a member of. The Contact Name could be a member of many Group Names and therefore there may be many rows of the same Contact Name one with each Group Name that they are a member of. I have manually created separate columns for each Group Name in the spreadsheet that is attached.

Goal:
I would like to have a macro that will look at the Group Name column and create a new column for each distinct group. I then would like the macro to go down the Contact Name column (I believe that I will have to have it sorted)and look at the Group Name that is listed in that row and put "True" in the Group Column that was created in the above step. Then, go to the next row, if the Contact Name is the same, look that the Group Name column and put "True" in the corresponding Group Column in the FIRST ROW OF THAT CONTACT NAME. Then Delete that row.

View 2 Replies View Related

Create Listbox On Userform With 3 Columns?

Oct 25, 2011

I want to create a listbox on a userform with 3 columns. The source data comes from the sheet "Data". After selecting a value from a combobox (which can also be found in the "Data" sheet), I want the first coloumn to display the matching LJHs, sorted ascending. Second column the matching date and the 3rd column to be the total quantity (maybe with SUMIFS).I dont know if you can refer to a listbox element for the worksheetfunction SUMIFS.

This is what the Listbox is supposed to look like and some sample data.

View 1 Replies View Related

Automatically Create Csv Files From Columns

Apr 9, 2008

I have an excel worksheet with data from A to T and the numbers of rows may change from use to use. I want to create a button/macro that determines where the data ends and will take the data from two columns, say column A and column D and put it in a new csv file.

In my final product, I would really like to be able to have a set of check boxes that say "Column D", "Column E", ... "Column T" and so if I check TWO boxes, say "Column D" and "Column T" and click create, it will output TWO csv files, one with Column A and Column D and the other with Column A and Column T.

View 5 Replies View Related

Merge Columns & Create New Row Layout

Aug 7, 2008

i have a table looking something like this

----A--------------B---------------C----------------D-------------
1---Destination-----Country_Code---Area_Code------ Price_Per_Minute
2---Armenia--------99--------------58, 59, 566------0.098
3---Jordan---------96-------------79,78,77,2--------1.023
4---UK-------------44-------------------------------0.50
5---UK-------------44-------------79,78-------------0.48

what i actually need is to turn this table into 3 columns table, the first column is the destination, the second one is the destination code which consists of the concatenation of the country_code and the area_code columns, and the third column will be the price_per_minute, the main problem is that the Area Code column contains many values and each value should be attached to the country_code and then i need to create more rows for each country, so the my table should look like this:

----A--------------B---------------D-------------
1---Destination----Code-------Price_Per_Minute
2---Armenia-------9958-------0.098
3---Armenia-------9959-------0.098
4---Armenia-------99556------0.098
5---Jordan--------9679-------1.023
6---Jordan--------9678-------1.023
7---Jordan--------9677-------1.023
8---Jordan--------962--------1.023
9---UK------------44----------0.50
10--UK------------4479-------0.48
11--UK------------4478-------0.48

View 5 Replies View Related

Aligning Rows Of Different Columns With Unequal Rows?

Feb 11, 2013

How to align two columns that sometimes have rows that are unequal in number. The data is sourced from a web page that has a table layout and the table lays out the one to many values this way in the table. My data looks like this:

Table ...Term
t1 ..... term1
t2 ......term2
..........term2.a
..........term2.b
..........term2.c
t3 ......term3
..........term3.b

The editor removes leading spaces. In the column Table there are only three rows but in column Term there are multiple rows per single row from column Table. So one row t2 for column Table has three rows in column Term. Are these cells merged and can I in a mcro detect if the cells are merged? How is the addressing of the merged cells in a VBA macro?

View 2 Replies View Related

Create Several Rows From One

Jul 22, 2013

I have a download from a customer contact database that has to be entered into another database. The first database has couples and business partners listed in the same record while the second database needs everyone to have their individual record.

For instance:
John & Mary Smith
1234 Main St
Mark Smith & Bob Jones
978 Park Ave
Bob & Carol & Ted & Alice Parker
343 East North St

Should be:

John Smith
1234 Main St
Mary Smith
1234 Main St
Mark Smith
978 Park Ave

[Code]....

There are some records with only one person listed, I just omitted them for simplicity. Is this possible? Or would it be more trouble that it is worth?

View 3 Replies View Related

Create Average Based On Grouping Of 3 Columns

Mar 22, 2013

If my spreadsheet has columns A-H.

A is Date
B is Room Number
C is Location
D,E,F all have numbers results in them.
G is the average of D,E,F for each person
H is group average.

If I want to define a group average in column H where it calculates the average of a group that attended the same location, date and room, for each group that attended would that be possible?

So For Example (Columns DEF left out for clarity)

Date
Rm
Location
G Inidivual Average

[Code]....

So because room number changed it calculated as a different group. Is this possible?

View 3 Replies View Related

Combine Columns To Create A New Column With No Duplicates

Nov 7, 2013

Columns A, B, C and D contan a list of Names, I want to be able to in column E list all the items in A,B,C and D with out duplicates. How would I do this?

View 1 Replies View Related

Merge Two Columns To Create 1 Column With All The Data

Mar 12, 2014

I have 2 columns full of information feeding from 2 different sources on our internet database

I would like to collect this information into 1 column to create a drop down list

As these are expanding tables feeding from the internet I don't think copy and paste into one column will work (I'm not sure about this but I would prefer a formula to avoid any issues).

View 4 Replies View Related

Create Distinct Unique List For 2 Columns

Aug 6, 2014

So far I created code that creates a Distinct Unique item's list for one column. It works as it should but I want to modify the code to create a Distinct Unique item's list for two columns that are related to another i.e. a person's name to their license #.

Here is the code below that works for one column only:

[Code] ......

View 9 Replies View Related

Create A Summing Up Report Based On Three Columns

Nov 14, 2009

I need to create a report based on three columns. I have explained in detail about my requirement in the attached sample workbook.

I hope someone will help me to solve the problem through VBA because the items & expenses may vary at times. Hence, I feel a Macro will be the best solution.

View 14 Replies View Related

VBA - How To Create Graph Where Data Source Is Two Columns

Jan 9, 2012

I'm looking to create a graph where the data source is two columns:

Column A (From A2 down to last but one populated cell)
Column ? (Last populated column on the right, from ?2 down to last but one populated cell.

all I have at the moment is the generic code for creating a graph (which I reverse engineered from a macro I recorded).

Code:

Charts.Add
ActiveChart.ChartType = xlColumnClustered
ActiveChart.SetSourceData Source:=Sheets("1_bth_x_wk").Range("A1:H40"), _
PlotBy:=xlColumns
ActiveChart.Location Where:=xlLocationAsObject, Name:="1_bth_x_wk"

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved