Extract Month From Date In Cell?
Sep 25, 2011
I have a date as 1/1/11 format in a date-formatted cell A1 for example. I want to extract the month in MM format, i.e. January, or "1" is extracted as "01", etc and just place it into A2.
So far, I've found an option to use format function in VBA and "MM", but I'm not familiar with VBA yet.
View 6 Replies
ADVERTISEMENT
May 18, 2014
I have attached an example spreadsheet which should be relatively intuitive over me trying to explain it.
I am wanting to extract all CJ numbers with the corresponding dates from Sheet 1, into Sheet 2. It has to factor in, engineer name (as stated on sheet 2), the Month (as stated in sheet 2 "May") with the "Attended site" date in sheet 1....
If you see the worksheet it should give you the whole picture with a fair amount of clarity.
Book1.xlsx‎
View 11 Replies
View Related
Nov 7, 2013
I need to extract a month from a field which looks to me like a date field, but as you can see in the file: Month(A1) returns 11/01/1900 instead of 06/11/2013.
View 4 Replies
View Related
Nov 8, 2012
I have a column with the following values:
SubmitDate
November 8, 2012 1:37:07 PM GMT+05:30
November 8, 2012 9:32:03 AM GMT+05:30
November 8, 2012 4:32:54 AM GMT+05:30
November 7, 2012 10:28:11 PM GMT+05:30
November 7, 2012 8:36:43 PM GMT+05:30
November 7, 2012 6:33:13 AM GMT+05:30
[code]......
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
View 4 Replies
View Related
Mar 8, 2012
ABC12/15/12february
extract the month from cell A1
View 4 Replies
View Related
Jan 28, 2010
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
View 9 Replies
View Related
Aug 14, 2012
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
View 1 Replies
View Related
Jul 8, 2014
In cell A1 i have a drop-down list.
In this list are the following:
London [S] (14/02/2013)
Rome [W] (23/10/2013)
Tokyo [W] (17/01/2014)
Berlin [A] (24/02/2014)
...and so on...
In cell B1 I would like to extract the currently selected city name and the [?] (e.g. "London [S]")
In cell C1 i would like to extract the currently selected date (e.g. (14/02/2013)
View 6 Replies
View Related
Jul 31, 2007
I've had a question which i can't solved cause of poor knowledge. Example of my issue: cel A1 are filled with a lotnumber like 107610618. as 107=year 2007 61=code of product 06=month 18=runnumber. in cel B1 i would like to have a few characters of that lotnumber visible. all that i want to show in cel B1 = month & year example 0607. Then when this is done in cel C1 i would like to convert this characters into june-07.
View 6 Replies
View Related
Jun 2, 2006
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies
View Related
Aug 24, 2007
I am trying to develop a SUMIF formula that looks up a date mmddyyyy and only keys off the month in the range cells. Example: =SUMIF(B7,"August",E7:F7)
B7 has the full date in ie. 8/10/2007 or 10-Aug-2007. My work around has been to separate out the date, month, and year into three different columns. Can you define the date by a range? Example:=IF(AND(B6>=8/1/2007,B6<=8/31/2007),SUM(E6:F6), 0) ... this doesn't work,
View 6 Replies
View Related
Dec 22, 2008
i have data in column A and i want extract to column B only the date from this data. Date start on diferent position.
ex:
col. A
1 text text 10.10.1998 text
2 text10.12.2001
3 10.12.2004
4 10.12.2005 text text
i want this result
col. B
1 10.10.1998
2 10.12.2001
3 10.12.2004
4 10.12.2005
i try solution from other thread, but it doesnt works for me.
View 10 Replies
View Related
Jan 9, 2010
Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
View 3 Replies
View Related
Jan 13, 2007
That is what my spreadsheet looks like. I have about 130 in the sheet I'm working on now. A is my date cell, B is my total for that date, C is the cell I have made for the =Month(serial_number). The problem i'm having is how do I get it to not put a number in my "C" cell when there isn't a month present?
This sheet will change weekly, so I've went down to 300 with my month formula. When entering the formula in the cells that do not have the month, it automatically inserts a 1 that throws the count off for my entire sheet. How can I leave the code for my month in without having it add a number when there's no month?
View 5 Replies
View Related
Jul 14, 2007
I would like to see the Year To Date sum month by month in cell B8 when rolling down the cell B6. See in attached file.
View 9 Replies
View Related
Dec 25, 2013
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies
View Related
Mar 23, 2007
In Cell A1 Value is: 20070322_023047_002035_1112223333
above code is like Date(YYYYMMDD)_Time(HHMMSS)_Agent#_Phone#
I want result As per Following:
In Cell B1: 03/22/2007 Date(MM/DD/YYYY)
In Cell C1: 02:30:47 Time([HH]:MM:SS)
In cell D1: 002035
In cell E1: 111-222-3333
View 10 Replies
View Related
Mar 20, 2009
I have log data in two columns:
Column A: Date/time (at 30 minute intervals)
Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
Manual
=IF(OR(MONTH(A1009)=A4)*(A$4:A$65536
View 9 Replies
View Related
Aug 20, 2013
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
View 4 Replies
View Related
Nov 11, 2009
I'm trying to link two different budgets into a third spreadsheet. The final step I'm attempting to accomplish is have an if-and statement reference just the month from a date-formatted cell. One of my departments tracks their budget on a daily basis, i.e.
11/2/2009, 11/3/2009, etc. rather than just 11/2009. I want the if-and statement to return the budget from all days in a given month so i can apply the formula to the whole year, broken down monthly too. I saw a question similar to this one but didn't see any responses so I'm not sure if it can be done.
View 6 Replies
View Related
Dec 2, 2009
i have attached a sheet, i want if i put date in cell a2 and automatically month should come in cell b2 and year in c2,
LIKE JAN AND 2009 LIKE THAT
View 5 Replies
View Related
Aug 22, 2008
I have 22-08-08 in Cell A2 I would like it to change to 22-09-08 on 23-08-08 ideally using edate (but not neccessarily).
Perhaps I can add a formula with conditional formatting eg formula is = "On Today()+1 Add 1 month to cell A2"
View 9 Replies
View Related
Feb 6, 2008
I have two workbooks, one a database that accumulates data over time, and the other a monthly report that needs to be populated based on information from the database. When moving data between the two, the following works fine (snipped a lot for ease of reading):
Workbooks.Open (database) ', Password:= /
Workbooks(reportbook). Sheets("Sheet1"). Range("A1").Value = month(Cells(282, 5))
As you can see, it simply puts the month from a cell in the database into the report workbook. However, if I change Range("A1") to Cells(1,1) I get a runtime error:
Workbooks.Open (database) ', Password:= /
Workbooks(reportbook).Sheets("Sheet1").Cells(1, 1).Value = month(Cells(282, 5))
I can generally work around this issue by changing the active workbook, but doing so is a big pain. Is there any way to use the second bit of code without popping an error message?
View 3 Replies
View Related
Mar 20, 2008
In one cell the user has to fill in a date, example 20.3.2008 and then in another cell he/she has to choose a month from a list (january-december). I need a macro that checks that the month stated in the date cell is the same as the month selected in the other list cell.
View 3 Replies
View Related
Nov 20, 2013
I need to extract the credit card expiration date from a cell. For example
1111 1111 1111 1111 1/17 code 1111
I was able to get the /17 using =MID(C77,FIND("/",C77),4)
However, I can't get the "1" before the /.
View 5 Replies
View Related
Jul 28, 2008
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
View 9 Replies
View Related
Jul 25, 2012
I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).
View 7 Replies
View Related
Apr 9, 2008
I am using the MONTH function in a formula. The Month value of an empty cell is returned as "1". Why is this? Is there any way to return a null value or zero?
View 6 Replies
View Related
Feb 9, 2014
I need to extract the month and day from a date / time string into another cell. An example of the string is 1/28/2014 10:26
I want the result to be 1/28
View 4 Replies
View Related
Feb 3, 2007
Cell is input as 01.01.2007. Using =MONTH
formula I am unable to get 1.
Any thoughts on how to extract the month from the middle
digit.
View 9 Replies
View Related