How To Filter Data Using Cell Names
May 15, 2014
I want to filter data using Cell names
My Filtering data is in Sheet1 and the criteria data is in Sheet3
In Sheets("Info").Range("Device_Description_1") I have the value WAVE-274.
So I have wrote a working code to filter data using
[Code] ......
But now I want to change Criteria1:
= "=*WAVE-474*" and make Criteria1:= Sheets("Info").Range("Device_Description_1").Value.
As long as the cell contains "Device_Description_1" Value, it should filter but I am not getiing any data.
View 3 Replies
ADVERTISEMENT
May 2, 2014
I just want to filter and sort the data based on names and hours.
Here it goes:
1. Filter Column F.
2. Filter it by: UK & M UK
3. After that, filter Column E in "Ascending order"
4. Count the data that are:
-starts 1:01AM - 7:59AM and display the total count in Sheet2, if there are no data in other specific time, then display a value "0"
For example for UK and M UK:
In Sheet 2, ("F5") = 3 as there are 3 data, G5=1, H5=0 and so on and so forth..
I've attached my file : Filter and Sort.xlsx‎
View 3 Replies
View Related
Apr 16, 2013
I am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
View 1 Replies
View Related
May 7, 2012
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies
View Related
Mar 4, 2014
I have an issue with a Pivot table: I am using the 'show report filter pages' function and prior to this I have ensured my character length of that field is equal or less than 31 however when I hit the function the tab names are shortened to 26.
View 1 Replies
View Related
Oct 5, 2013
I have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
View 2 Replies
View Related
Feb 15, 2010
I have had no luck searching for an answer so better to ask. I am using auto filter on Sheet1 and filtering a column of dates. What I need is for the criteria for the auto filter to be pulled from cell H1 on Sheet 2. Is this possible or is auto filter the wrong direction to go? I am looking to find all the rows on Sheet 1 that contain the date found in cell H1 on Sheet 2. Then I am going to cut and paste that data to another worksheet. I think I have all the rest of it figured out but am stumped at the filtering portion.
View 9 Replies
View Related
Jan 4, 2013
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
View 4 Replies
View Related
Dec 10, 2012
I want to use the content of a specific cell in one worksheet to be used to form the filter criteria on a set of data in another worksheet, both sheets are in the same workbook
View 1 Replies
View Related
Sep 23, 2006
I have many sheets which I am using the advanced filter to filter the data to a single summary sheet. Everthing works great with one exception. I have cell comments added with relevent info to to cell values. When the advanced filter is performed the cell comments are not transfered to the summary sheet with the cell values. Is there a method to filter the data to another sheet and keep the comments?
View 5 Replies
View Related
Jan 26, 2012
I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies
View Related
Nov 19, 2013
I want to insert a cell reference into the code below to replace the hard coded "100500" so the value in cell A1 replaces the criteria below. Is this possible ?
Rows("3:3").Select
Selection.AutoFilter
ActiveSheet.Range("$A$3:$B$17").AutoFilter Field:=2, Criteria1:="100500"
Range("A3").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("A22").Select
ActiveSheet.Paste
View 2 Replies
View Related
Jan 14, 2010
How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
View 9 Replies
View Related
Mar 15, 2007
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
View 5 Replies
View Related
Mar 21, 2013
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
View 1 Replies
View Related
Apr 30, 2013
I want to use a Pivot table to filter data to show just the studies that contain patients from the 'South' area?
As per example below I want to be able to see all the patients in all areas but only for studies that have patients from the south. I put together an array formula that works well for small tables but is too much with one one my sheets that contains 200,000 rows.
Before filtering:
Study ID
Study Short Title
Study Patient ID
Area
1346
LLP
90126
Northwest
[code]....
View 8 Replies
View Related
Mar 7, 2008
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
View 2 Replies
View Related
Dec 20, 2012
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies
View Related
Aug 6, 2013
Trying to use Excel Data List to create a database style report. IE. Originally blank sheet, which is only populated by data containing data matching "filters" input into cells ( say A1 & A2 )
I.e. A1 = Delivery week to be filtered by, and B1 Manufacturer Name
So if I type week "1" into A1 & Manufacturer "Microsoft" into A2, it will show a table only containing data Microsoft, Week 1, and associated data for those lines across the screen.
Week 1
Microsoft
PO number : Date Ordered: Address 1, 2 3 etc....
0011 01/01/13 Somewhere
0015 02/01/13 Anywhere
0213 05/01/13 Nowhere
I know this is much easier with a database, however my manager insists a database cannot be used, and it must be in a spreadsheet format !
View 3 Replies
View Related
Jan 13, 2014
I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies
View Related
Oct 15, 2013
Code:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
View 2 Replies
View Related
May 8, 2014
Looking for a formula (not macro) that can do the following:
I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.
The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...
Name Spreadsheet Ex.xlsx
View 2 Replies
View Related
Apr 25, 2012
I have a list of names in column A and many of them repeat. I need to find a way of just listing the names Alphabetically (only Alphabetically if possible) that are there (without repeating any)
Is there a formula that can do this?
View 2 Replies
View Related
May 1, 2008
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
View 9 Replies
View Related
Feb 25, 2011
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
View 3 Replies
View Related
Aug 26, 2008
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
View 9 Replies
View Related
Aug 5, 2013
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
View 1 Replies
View Related
Apr 19, 2009
I have a spreadsheet with columns A to I filled. I want to filter the data so that:
Show all rows where I= a value, plus show all rows where E= the value in row E where I = the value selected.
eg
E=10, I=value
E=10, I does not=value
E=12, I does not=value.
In the above case I want to filter to show first and last row, not 2nd row.
View 7 Replies
View Related
Jul 15, 2009
I have a database named Data with a few 100 records. I am attempting to view the top 10 records by Sales or PBIT. The Userform has two option buttons (Sales and PBIT). If the user checks Sales the top 10 sales records must display and the same for PBIT.
View 4 Replies
View Related
Dec 31, 2007
I need to filter some data. So I want to have a time based filter. I have created a bench market time...so I need to say if the time stamp on data point 1 is greater then timebenchmark then fill with data from celx.
Value time stamp Benchmark NEW Cel
1) 38 12:30 12:15 38
2) 24 12:31 12:15 24
3) 14 12:14 12:15 blank..nothing..empty
if timestamp is > Benchmark then fill NEW cel with Value
if timestamp is < Benchmark then fill NEW cel with Nothing (ie leave blank)
View 9 Replies
View Related
