Excel 2010 :: How To Filter / Sort Data Based On Partial Match Of Data In Cell

Excel 2010 :: After Applying A Data Filter And Sorting The Data / How To Revert Back To Original

Dec 20, 2012

I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?

View 3 Replies View Related

Extracting Data Based On Partial Data In A Cell

Jan 23, 2013

I have a spreadsheet full of data and I need to extract only those lines of data which can be identified by the last three letters in a cell. I am adding an example spreadsheet which highlights the rows I am trying to extract based on the contents in column B but only where column B ends in KY.

Example data extract requirement.xlsx‎

View 5 Replies View Related

Excel 2010 :: Using Data From Two Cells To Match Data Within Another Sheet

Dec 7, 2012

I have a workbook with data on sheet1 and a summary on sheet 2. I want to use two drop down boxes on sheet 2 (B3 and B6) to look up matching data from sheet 2. What formula is best to enable these two look_up values to be used? I saw an example where the two values were separated by a comma within {} i.e. {B2,B6}, but only got an error when I entered the formula into my Excel 2010 sheet.

I have previously used VLOOKUP, but this comes back saying I have to many arguments. I can attach the workbook if that makes it easier to explain.

View 1 Replies View Related

Filter And Sort Data Based On Names And Hours

May 2, 2014

I just want to filter and sort the data based on names and hours.

Here it goes:

1. Filter Column F.
2. Filter it by: UK & M UK
3. After that, filter Column E in "Ascending order"
4. Count the data that are:

-starts 1:01AM - 7:59AM and display the total count in Sheet2, if there are no data in other specific time, then display a value "0"

For example for UK and M UK:

In Sheet 2, ("F5") = 3 as there are 3 data, G5=1, H5=0 and so on and so forth..

I've attached my file : Filter and Sort.xlsx‎

View 3 Replies View Related

Excel 2010 :: Filter - Sort Not Working?

Oct 24, 2011

I have a filter on the Qty column but when I sort Z -A or A - Z it does not work. I have tried formatting as number but no success, I have never seen this before, why the sort wont work? I am using Excel 2010 in Win 7

View 5 Replies View Related

Excel 2010 :: Macro To Filter Column Based On Active Cell Value?

Feb 25, 2014

I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.

The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.

So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.

As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.

MWTS034G22 Job Card Sheet
[URL] .....
Windows 7 (32bit)
MS EXCEL 2010

View 2 Replies View Related

Excel 2010 :: Insert Row Data N Times Based On Cell Value

May 1, 2012

I have a sheet that contains the following columns:
Invoice, Document #, Date, PO #, Part #, Part Description, Quantity, Net Amount

Based on the quantity in the row I need to copy the row, and insert it n-1 times. So if the quantity is 5, I need to copy and insert the data below the original row 4 times for a total of 5 rows of data.

I plan on firing the macro with a button as the data will change month to month.

Using Windows 7 and Excel 2010

View 2 Replies View Related

Excel 2010 :: Value To Cell Based On Horizontal And Vertical Data On Matrix

Jul 30, 2013

I have chart like below. In empty cells I want either 1 or 0 (1 if software is installed and 0 if not).

Excel
Outlook
Powerpoint
Word

Computer1

Computer2

Computer3

Computer4

Computer5

Data of computers and their software are like this:

Computer1
Word

Computer1
Excel

Computer1
Powerpoint

Computer1
Outlook

Computer2
Outlook

Computer2
Excel

Computer3
Outlook

Computer4
Outlook

Computer4
Excel

Computer4
Word

Computer5
Outlook

So called Matrix Lookup was very close, but it finds data FROM Matrix (aka that first table). Is it possible at all?

Excel and Windows version:
Excel 2010 SP1
Windows 7

View 3 Replies View Related

Excel 2010 :: Copy Data From One Cell Based On Color Of Another Cell To Different Worksheet

Jan 30, 2014

I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.

The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.

The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)

View 2 Replies View Related

Excel 2010 :: Repeat Cell Data Based On Another Cell Column Dragging Down

Apr 24, 2014

Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.

Excel 2010
A
B
C
1
Helper Column
Desired Result

[Code].....

View 6 Replies View Related

Excel 2003 :: Calculate Sum Based On Partial Text Match And Latest Date

Jun 19, 2014

I need a formula to do a partial text match on column B to find all rows that contain "825-CL-A", then sum column C for all applicable rows with the latest date. In this example the result should be "4.25 + 6.50 = 10.75". I'm using Excel 2003 for this project.

A B C
7/1/2012 0:00825-CL-A-41091-REG4.00
7/1/2012 0:00825-CL-A-41091-REG6.25
7/1/2013 0:00825-CL-A-41456-REG4.25
7/1/2013 0:00825-CL-A-41456-REG6.50
1/1/2014 0:00825-CL-A-41640-REG4.25
1/1/2014 0:00825-CL-A-41640-REG6.50
3/1/2014 0:00825-CL-E-41699-REG3.00
3/1/2014 0:00825-CL-E-41699-REG4.00

View 14 Replies View Related

Excel 2010 :: Match 1 Cell And Column In Sheet 1 To 2 Columns In Sheet 2 Return Data From A 3rd

Jul 23, 2012

I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.

My attempt is in cell D2 on sheet1.

View 5 Replies View Related

Excel 2010 :: Index - Match With Data In Rows

Jan 7, 2013

Using Excel 2010.

Rows 1 and 2 (range: A1:CM2) within Spreadsheet X contain the range of data that I need.

Within Spreadsheet Y, Row 6 will change monthly and will be input by the user. The value in Row 6 equals the data in Row 2 in worksheet X.

I need to put a formula in row 4 of spreadsheet Y that returns the value of Row 1 in Spreadsheet X.

Unfortunately, I cannot change the spreadsheet layout, otherwise I could do an HLOOKUP formula using Spreadsheet Y Row 6 and Spreadsheet X Row 2 and be done with it. I assume that I need to use an Index-Match formula, which I am not as familiar with. In addition, all of the online support I have found explains Index-Match with data in columns, not rows.

View 1 Replies View Related

Put X If Data Has Partial Match

Mar 12, 2012

I have data below, what I am trying to do is to put an "x" if the data has a partial match. This is what I am using below.

HTMLSheet1 ABC1G. Washington SchoolGEORGE WASHINGTON SCHOOL 2Electrical Magnet SchoolELECTRICAL 3Sports Magnet SchoolCOLUMBUS SCHOOL 4JonesJONES SCHOOLx5J. StrongSTRONG SCHOOL 6Abe Lincoln SchoolLINCOLN SCHOOL 7HarrisonHARRISON SCHOOLx8Abe Lincoln SchoolLINCOLN SCHOOL 9Abe Lincoln SchoolLINCOLN SCHOOL 10Abe Lincoln SchoolLINCOLN SCHOOL Spreadsheet

[Code] ...........

What I would like is this

HTMLSheet1 ABC1G. Washington SchoolGEORGE WASHINGTON SCHOOLx2Electrical Magnet SchoolELECTRICALx3Sports Magnet SchoolCOLUMBUS SCHOOL 4JonesJONES SCHOOLx5J. StrongSTRONG SCHOOLx6Abe Lincoln SchoolLINCOLN SCHOOLx7HarrisonHARRISON SCHOOLx8Abe Lincoln SchoolLINCOLN SCHOOLx9Abe Lincoln SchoolLINCOLN SCHOOLx10Abe Lincoln SchoolLINCOLN SCHOOLxSpreadsheet FormulasCellFormulaC3=IFERROR(IF(SEARCH(A3,B3),"x",""),"")C7=IFERROR(IF(SEARCH(A7,B7),"x",""),"")

View 6 Replies View Related

Excel 2010 :: How To Match 2 Columns And Retrieve Data From 3rd Column

Jan 16, 2013

How to match 2 columns in excel and retreive data from the 3rd column ?I have an example here as to what I want to do..

ColA ColB ColC ColD

niki delhi neha
vinay mumbaihardik
kapil bangalorevinay
neha patna
pooja goa
hardik kerala

Here is what I want to do for the above.

ColA and ColB contains a standard information which is supossed to be my reference. ColC contains my queries for which I need information about their place in ColD.

So I need to match ColC with ColA, so as to retrieve the matched data (between ColC and ColA) from ColB to ColD. Following is the way I expect my result to be..

ColA ColB ColC ColD

niki delhi neha patna
vinay mumbaihardik kerala
kapil bangalorevinay mumbai
neha patna
pooja goa
hardik kerala

I received an answer in that link

"=INDEX($B$2:$B$6,MATCH($C2,$A$2:$A$6,0))",

Which when tried, surely worked a few months back. I am now using excel 2010. I tried the same again, but this time it does not work for me. Is there something else to do which has been changed in the new excel 2010 ?

View 3 Replies View Related

Lookup Data With Partial Match

Sep 4, 2006

My database includes data about period (column A), a product code (column B), Turnover previous year (column C), Trend (column D) and Turnover this year (column E). In column C i want to have the turnovers from a particular product code from the previous year. The difficulty is:

1. that the product code can vary
2. not all periods are availabe.

How can i formulate a formulate that shows the turnover from the previous year, and in case there is no data from the previous year it should show "n.a.". This formula must also take into account that product code can vary. In my example: C3 should show 1296, C4 should show 877, C5 should show 884 and C6 should show 960. In case the turnover of period 200104 was not available C3 should show n.a.

View 3 Replies View Related

Excel Sort / Filter Function Based On Set Criteria?

Sep 9, 2012

I have following data to sort/filter

Sector
Flt no
origin

[Code]...

Is this possible with excel functions?

View 1 Replies View Related

Macro That Searches For Partial Match Then Apply IF Statement Based On Match

Sep 21, 2013

I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.

I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet

This is what happens if working right =

look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)

Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)

Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).

View 1 Replies View Related

Using VLOOKUP To Fill Data With A Partial String Match Separated With A Dash

Aug 18, 2014

I have a list of items in Column A and size info on Column B i want to being in the info to another sheet with a vlookup but the problem is that I have a lot of items with different colors so after the item no. it has a dash and a letter or two for the color so i want to bring into my new sheet all info.

I have in my old sheet for all items regardless of color so for instance in my old sheet i will BR1000-EM and then in my new sheet i will have BR1000-R and BR1000-SA and BR1000-YC how do i make a vlookup it should only lookup the values in both sheets only till the dash (i cant use a certain no. like left,6 because the item no can have more then 6 but it always has a dash when it has a color code) also not all items have dashes so the dash is not always there but when its there i would like that the lookup should stop by the dash.

View 6 Replies View Related

Excel 2007 :: Match Partial Text When Partial Text Is Not Exact

May 20, 2014

This is for Excel 2007,I have two sets of model numbers. One set is the full model numbers of the units we use, and the other is an abbreviated form used to lookup up certificate numbers. I need a way to match these up so I can use one set of search criteria to find out if there is a match. Here is an example of what I need to match with a partial text match:

H,AE35(6,9)36+TD and AE3563636D145C2501AP
H,RE36(6,9)36 and RE36936C145B2505AP

if I could do this with a formula that matches multiple items at the same time (ie; if A & B & C match=true) with the above model number being one of those items (certificate numbers are issued for sets, but the other model numbers are fine).If that's not possible, a one time VBA run to match all of the abbreviations at once would also work. If these items are matched up with a one time VBA, the VBA needs to account for their being more than one match for each abbreviation depending on the size of the unit.

So H,AE35(6,9)36+TD could be matched to:
AE3563636D145C2501AP
AE3563636D175C2501AP
AE3563636D210C2501AP

View 11 Replies View Related

Excel 2010 :: Sort Worksheets Alphabetically And Keep The Data In Worksheets

May 15, 2013

I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.

View 2 Replies View Related

Excel 2010 :: Highlighting Data Based On Conditional Formatting

Apr 1, 2014

I'm using Excel 2010 on my Mac. I would like to set up the data as follows:

A
B
C
D
E
F

NAME
DATA X
DATA Y
DATA Z
DATA XX
DATA YY

NAME
90%
88.2
410
88.4%
97.8

[Code] ........

Now what I would like to do is have the data in each column highlighted a certain color based on specific ranges. For example in Column B I want anything from 92% - 100% highlighted blue. I would like 83% - 91.9% highlighted purple, and anything under 83% highlighted red. Do I need to have a conditional format entered in each cell? Can I set up a conditional format for the whole column? Once I can figure the formatting in my example the remaining columns will be a breeze since they will be set up in the same manner just different number ranges, same colors will apply.

View 2 Replies View Related

Sort Pivot Table Based On Partial String...

Oct 6, 2008

I've got a group of data within a pivot table that I want to be sorted based on only part of the string. For example,

Standard Kitchen
Standard Master Bath
Standard Hall Bath
Optional Kitchen
Optional Basement Bath

First they would be sorted by whether they begin with Standard or Optional. Then within those groups, they would be sorted whether they contain Kitchen anywhere in the string. So that the order would be Standard Kitchens, Standard Anything Else, Optional Kitchens, Optional Anything Else.

View 3 Replies View Related

Linking Partial Data From One Cell If Data In Another Cell Meets Requirements

Jan 6, 2009

The merged Cell B6:G6 will receive a ten-digit number followed by a dash and then one or more numbers. (For example: 1234567890-123)

Cell B15 will then receive data shortly afterwards. I already have a validation macro for this cell which allows either 'I' or 'I I I'.

Upon exiting Cell B15, merged Cell B16:H16 needs a macro which will check Cell B15 and if it contains 'I', Cell B16:H16 will display the data from the ten-digit number entered in Cell B6:G6 minus the first five digits. (For example: 67890-123)

Now the data in Cell B16:H16 can only be somewhat editable hereafter. It can be erased or replaced with numbers in smaller or greater digit combinations than five before the dash (i.e. 67890-123 can be replaced with 123456-7), and digits can be added after the whole group (i.e. 67890-123 & SEE DWG) without any error messages. But if any five-digit number with a dash and some numbers exist in Cell B16:H16, they must correspond with the number in Cell B6:G6 minus the first five digits.

However, if Cell B15 ever receives a 'I I I' afterwards, all data in Cell B16:H16 must be erased. Cell B16:H16 can never contain data if Cell B15 contains 'I I I'.

Also, if the data in Cell B6:G6 changes later on, the corresponding digits in Cell B16:H16 must change as well, even if there are digits after the whole group.

So here is an example of what a good macro would do for me: ...

View 14 Replies View Related

Excel 2010 :: How To Auto Populate Data Based On ComboBox Selection

Jan 27, 2012

I have a question on how I could populate data using a combo box selection in Excel 2010.

For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.

Maybe to make it clearer...

Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998

Combo box (selection of names): John

Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998

how I could solve this Also, do let me know if this can be done without the use of VBA.

View 4 Replies View Related

Excel 2010 :: Macro Based Search Function Using Data From 2 Cells

Mar 15, 2012

I have been using a macro to search and highlight customer addresses for me, however I have changed my worksheet and now have the addresses in two columns instead of one (D for the numbers, E for street names) for sorting purposes.

What I would like to do is either; find a way to search using data from 2 cells to get a result, or have multiple results highlight and popup.

Using: Excel 2010

Code:
Sub SEARCH_FUNCTION()
Set FoundCell = Sheets("Route").Cells.find(What:=Sheets("Intro").Range("G15"), LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False)
If Not FoundCell Is Nothing Then
With FoundCell

[Code] ...........

View 2 Replies View Related

How To Sort Data In Excel If It Has Cell References In It

Jun 11, 2013

I created an excel workbook with multiple cell reference throughout the various worksheets. I did this because I was creating a dependent drop down list. When I try to sort my data alphabetically, all my cell name references get changed. How I can sort alphabetically without losing my cell name references?

View 7 Replies View Related

Excel 2010 :: Pivot Table Add Calculated Field Based On Certain Text In Report Filter

May 29, 2014

Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.

I used the formula below in a calculated field and it does not match the values using the added column to the data file.

=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)

I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.

View 2 Replies View Related

Excel 2010 :: Pulling Data Based On Multiple Criteria With Duplicate Values

Mar 14, 2012

I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.

I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).

For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?

Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1

Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2

View 3 Replies View Related