columns consist of 1,2
I selected only 1 value of cells
I want to add comments to all the 1 value cells by selecting all 1 by shift + ctl +down
I can put same comments to all the cells?
If you want to have the same comment applied on many cells you could apply it to a single cell, then use the copy and paste special tool bar commands (under Edit) In Paste Special select "Comments" but value is going of that cell.
Sheet 2 is the problem.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have included a sample.
long time reader, 1st time poster:I have a spreadsheet which uses =F to give set responses i.e.
Cell H35= =IF((G7-G35)=0,"No Issue",IF((G7-G35)>=1,"System/Paperwork do not Match",IF((G7-G35)
I have been able to use a time stamp code to put a date and time in a cell... I then worked out how to use this to list dates and times in the same cell (instead of replacing the cells contents)... using this
View 7 Replies View Relatedi have =TIME(LEFT(F17,FIND("h",F17)-1),RIGHT(F17,2),0). which gives a time in the format 9:30PM, or 10:30AM etc. How would i change the formula to give me a time minus 15 mins. Eg, if the above formula gave me 8:45PM, i would want it to show 8:30PM
View 4 Replies View Related
=C4+(0.3*(C5-((C2-1)*C3)))
Where C4 is 'Qualifying time', C5 is 'Starting fuel', C2 is 'Lap number' and C3 is 'Fuel consumption'. I also plan to make the 0.3 a changeable variable.
I'm not fussed as to whether or not this is a realistic function that would work in a real race, it's only hypothetical. However I would like to have a function that would give me the over all race time at any given lap, not just the lap time for it.
I Have 20:00-04:00 as text in a cell, what i need is to take the 04:00 and show only if its after 00:00 and before 07:00 and show it as time value. This is where I'm up to so far but i don't know how to ask it for > 00:00 and < 07:00.
View 4 Replies View RelatedI have a spreadsheet, but I need the following formula to make our lives easier here.
I have the following columns:
Rate, I/T/P/S, FT/PT
I need a formula that when I enter "I" for Infant it will give me the FT (full time) or PT (part time) rate. All the columns have drop down menus, so if I choose "I" under the ITPS column and then choose FT, I want the formula to be able to give me the full time rate which is 157.94
I have set up a spreadsheet to calculate time as followed:
A1 - Start Time
B1 - Finish Time
A2 - Hours Worked:
=IF(B1<A1,B1+1,B1)-A1
C1 - Start Time
B1 - Finish Time
C2 - Hours Worked:
=IF(D1<C1,D1+1,D1)-C1
and so on.........
I wanted to convert a variant to an integer. The variant data is stored in an array, the variant data was entered from a userform.
Private Sub CB_OilPrice_Click()
Dim xx As Long
UserFormSpecifyDetail.Show 'Enter data
For i = 1 To 120
xx = VarType(UserFormInputArray(i)) 'Returns 8
xx = Int(UserFormInputArray(i)) 'Returns error
Next i
End Sub
The value in UserFormInputArray = "50000"
error = Run-Time error 6, overflow
Excel 2003
I'm looking to work out an IF statement based on a series of dates entered to give 1 of 3 possable outcomes. Where:
A1: todays date (exmaple =NOW())
B1: due date (exmaple 10/02/09)
C1: completion date (example 12/02/09)
D1: status (overdue, outstanding or completed)
D1: =IF(A1>B1,"overdue",IF(A1<B1,"outstanding",IF(C1<=>A1 & B1,"completed")))
I know the last part is totally wrong (symbols arranged in that manner), but to clarify i would like the date entered in C1 to override the other statements in the fomula to make it read "completed". If no date is entered in C1 then the formula will return either "overdue" or "outstanding" depending on the other dates in A1 and B1.
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
In 1 cell i need a forumla to give me a starting number and take one away each time a code or codes are dislayed in a cell range. Something like this
A1 = 23 days or any number days i needed
Cell range B1:C52
every time a selected 1 or 2 letter code appears in the cell range i want A1 to subtract 1 day from the starting number, i would need it to subtract half a day if one code appears ie HD, the codes may be P, OT, HD
What I'm trying to do is link a cell to give me the sum of 2 different cells located in 2 different tables I created.
So I want to have Cell B5 look for the number in cell B3 in the Table that starts in column Q1 and give me the corresponding number in the same row in the column R1
then lookup the number in cell B1 in the Table that starts in column T1 and match it with the number in Column U1 that corresponds to it in the same row
and Finally give me the sum of both corresponding numbers.
IE.. the number in B3 is found in Q13 which uses the number it corresponds to in R13. The takes B1 finds it in T16 and uses the number it corresponds to in U16.
Then returns the sum of R13 and X16 into B5. (B5 should show 176)
I have been provided a spreadsheet which has a Quantity column "H". In this column is the quantity of the items and a note containing the serial numbers of the items. The note has no real format. Here are some examples:
Example 1: Serial numbers: 161702, 161722, 161740, 161741.
Example 2: Dec 2006: s/n 63194
Jan 2007: shipped 1 widget, 52480
Example 3: Sent in 2004: 717, 718
Apr 07: shipped 63522 and 63524.
Oct 30, 2007: K. Grande reported only two widgets onboard, 63522 and 63524. 717 and 718 are missing.
Nov 2007: 160302.
Dec 14, 2007: shipped 161093.
There are thousands of serial numbers on hundreds of rows like this. I am looking for code that would copy a new row to another sheet for each serial number in the comment with the serial number placed in column "J". I don't know if the extraneous text can be filtered out, but if I can at least get everything on a seperate row, I can sort/delete what I don't need a lot faster than doing this manually.
In have uploaded an example with before and after sheets. The After sheet is what I have done manually so does not match the examples I used on the Before sheet.
Is there a lookup formula that will give me multiple items? so in my example attachment i want to look up risk from section A to give me the item in section B, but for risk 7 for example it has multiple items (a,b,c), how would i get all them? even better would be if its possible to have in seperate cells
View 4 Replies View RelatedI keep a formula to many arguments error.
=if(C2="","X","", ), IF(h2="","X","", )
What I am trying to say is if cell c2 is populated enter a "x" and if h2 is populated enter a "x".
Is it possible to attach multiple comments to the different choices in a drop down menu?
View 1 Replies View RelatedI want to count a range of cells and if the value of those cells is 5 and over, i want it to give a 1 and if its under 5, i want it to give a 0. I've attached a file of what i'm after, row 13 is where the formula would go, i have just put in the values.
View 1 Replies View RelatedI have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I am looking to record the history of multiple cells at one time instead of as soon as I hit enter after changing one cell's value. There are other threads concerning just the history of a single cell as you input another value and hit enter.
So for example, I have multiple cells that are calculated using formula's in their respective cells using input cells in the worksheet. I will be changing the input cell's values in the worksheet to update the calculated cells. I want to record the input cell's values as well as the new calculated values at one time after changing the input cells. I dont know if I can add a button to a cell or something to that accord to accomodate this. I am still new to vba coding in excel.
From there forward I will interate this as new situations arise and want to record the input and output (calculated) cells on another tab or worksheet along with the date it was recorded.
Is there a way to delete comments in a selected range of blank cells?
View 7 Replies View RelatedWhen adding a comment I check for an existing comment, if exist then delete and add new comment and some text in that cell. This works as long as the cell has an existing comment; other wise it advances to the "Else" where I thought I would be entering a comment and text in an empty cell. Why does my macro treat an empty cell as if it has a comment?
View 4 Replies View RelatedThe macro below only works for a single cell, how to include merged cells?
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Excel.Range, Cancel As Boolean)
On Error Resume Next
Dim cmtText As String
[Code]....
1)After comparison and no difference between the cells
1.1) If the cell selected is blank then there will not be any color
1.2) Else the cell will be colored GREEN
2)After comparison and there is difference between the cells
2.1) Cells wiill be colored RED
However, my code seems to be unable to execute (1.1) . Pls help to see if there's any thing wrong with my code
For K = 1 To 31
For L = 1 To 29
'Do a comparison of the cells
If StrComp(Array_compare(A, 1), Array_compare(A, 2)) = 0 Then
If IsEmpty(Array_compare(A, 1)) Then
Sheets(3).Select
Cells(K, L) = Array_compare(A, 1)
Else
Sheets(3).Select .................
I have a cell comment on a series of columns and want to show only one column at a
time. For this reason I hide the ones not used, but the cellcomment doesnt move and
is still at the original place. How I move the comment when the original colums between are hidden ?
I know that I an probably asking for too much but I must get the formula some way. OK, I need a formula for this:
lets say I have 3 columns (A,B,C (search criteria). In each Column there is a DIFFERENT number. There is 3 more columns (D,E,F (used to compare).Each column has 3 Different numbers. If 3 numbers match between the two sets of 3 numbers I want Column G to display "CCC". IF 2 numbers match I want G to display "CCH". If 1 number is a match I want G to display "HHC". If none of the numbers match I want G to display "HHH".
I can manually do these but it will take waaaay toooooooooo much time to do. If you can do this for me it would be a great help indeed because I'm trying to do other states. With this formula I can use Automate to do a large quantity of numbers.
I'd like to know how to have the comment feature without the red triange on cells with comments. I didn't want to use data validation comments because I want the hover feature.
View 5 Replies View RelatedI try to edit comments in cells of a certain column and nothing happens. I am able to edit other comments throughout the spreadsheet, but when I select "edit comments" for these particular cells, no edit box is displayed for editing. It worked fine a couple of weeks ago.
View 11 Replies View RelatedReference the archives at:
http://www.mrexcel.com/archive/VBA/17448.html
How can I modify this sub to skip cells that are empty? I only want cells that are populated within the range to actually display the comment indicator, with the cell text transferred to the comment.
Ideally, I'd also like the text to be moved (not just copied) to the comment and leave an 'X' in the cell, in place of the text that was transferred to the comment, but I'll settle for the action above.