I know that I an probably asking for too much but I must get the formula some way. OK, I need a formula for this:
lets say I have 3 columns (A,B,C (search criteria). In each Column there is a DIFFERENT number. There is 3 more columns (D,E,F (used to compare).Each column has 3 Different numbers. If 3 numbers match between the two sets of 3 numbers I want Column G to display "CCC". IF 2 numbers match I want G to display "CCH". If 1 number is a match I want G to display "HHC". If none of the numbers match I want G to display "HHH".
I can manually do these but it will take waaaay toooooooooo much time to do. If you can do this for me it would be a great help indeed because I'm trying to do other states. With this formula I can use Automate to do a large quantity of numbers.
I have multiple sheets in excel file. Every sheet having same information for different areas. e.g. The bug was reported. One sheet might have answer in YES and other sheet might have No. I need to get answer YES if even one of sheet contains YES for the field.
I am looking for VBA code to solve a current problem. I have a list of numerical (row) values (Column A) that I am sorting the column (by VBA code) in descending order. Column B is the Bin location. These rows are then output to another worksheet (Column 1 shows the amount and Column 2 displays the Bin location and the amount to be shipped from each Bin). After each output, the original (A & B) columns are re-sorted.
If Column A = 27 Column B = Bin1 Then [TABLE]27Bin1;[/TABLE]
The Output should be Column 1 = 27 Column 2 = Bin1 27; written as [TABLE]27Bin1 27;[/TABLE]....................
I need excel to check to see if the data I input into column B is an exact match to the data in column A.
If it is an exact match, then column B will remain blank.
If the data in column B is different, I need column B to show the following:
No match: <data>
Example I input in column B the following:
Column A Column B 1. Car Car 2. 4357 9999 3. fsd34d 4erd 4. 98dkf 98dkf
Spreadsheet should show: Column A Column B 1. Car 2. 4357 No match: 9999 3. fsd34d No match: 4erd 4. 98dkf
(Cell 1 and 4 in column B are empty because they are exact matches to Column A cell 1 and 4)
My questions: 1) How does the excel formula need to be written for this to work?
2) Is there a way to set it so that when I do a mass copy to data into column B that the formula will not be overwritten and it will still check to see if the data I copy and pasted into that column matches the data next to it in column A?
What I would like to do is output the first 4 characters of a cell into another cell. eg Cell A1 has "1234 Sydney". If I just use the manual formula "=left(A1,4)" it would give me the correct output "1234" in say cell B2, but as a formula. As I need to automate this in a macro, how could you code this in VBA to output the String "1234" into cell B2(ie the actual output rather than a formula)?
I am trying to put together an IF statement within excel which will give me certain output depending on the particular value within ONE cell.
For example:
If cell L5 has a value between 0 and 1.00 output value 0 If cell L5 has a value between 1.01 and 2.00 output value 20 If cell L5 has a value between 2.01 and 3.00 output value 40 If cell L5 has a value between 3.01 and 4.00 output value 60 If cell L5 has a value between 4.01 and 5.00 output value 80 If cell L5 has a value between 5.01 and 6.00 output value 100
What I'm trying to do is link a cell to give me the sum of 2 different cells located in 2 different tables I created.
So I want to have Cell B5 look for the number in cell B3 in the Table that starts in column Q1 and give me the corresponding number in the same row in the column R1
then lookup the number in cell B1 in the Table that starts in column T1 and match it with the number in Column U1 that corresponds to it in the same row
and Finally give me the sum of both corresponding numbers.
IE.. the number in B3 is found in Q13 which uses the number it corresponds to in R13. The takes B1 finds it in T16 and uses the number it corresponds to in U16.
Then returns the sum of R13 and X16 into B5. (B5 should show 176)
I need a formula to look in column B and find all "jun" (or anything else that I put in there) THEN look in column J and find only all "d" (d is one of 3 choices there) that correspond to the "jun" then give me the count of the "d".
This is an example. With the formula I can do a variety of things to get info that I'd like to have.
I have the attached worksheet with clients' names in four columns (A-D). The first names and last names must remain separate. I need one additional column that shows whether a full name (first and last) in C and D also appears in A and B.
Then one more column that shows how many times the name in C and D shows up, but only if it is also in A and B.
I have a long chain of formulas calculating the return on a particular investment in equipment. We'll call the inputs A, B, and C, and the output (total savings generated) Z. There are several set combinations of values for A, B, and C that I'm interested in generating a summary report for.
There are a number of steps in-between the inputs that I'm interested in, all of which are necessary to get to the output, but is there a good way to have excel chart inputs and outputs without filling out the intervening data?
I suppose the whole thing is essentially a multi-variable, multi-step data table.
I need a macro that will compare two sheets, find the differences and produce a new third sheet called, results. Both sheets to compare will differ in length of values (one may have 10 numbers to compare, and the other could have 50, Ive attached sample data), and thus this calls for a primary and secondary sheet. I would only like the values which appear in the primary and not the secondary sheet to be reported in the new results sheet.
The problem is that the values never match up, but they are always within a +/- 0.5 window of each other. It would be great to compare the two sheets, to produce a list of the values which appear only in the primary sheet and not the secondary. Im trying to get this to link up to a userform, where the user select the primary sheet (A) and the secondary sheet (B), selects the tolerance, and produce the results sheet (see attached).
for example i have two work books where i need to compare the times, such as i need to see where does 10:26 am lies and after comparing it on workbook2 we need to return the data in a,b,c blocks infornt of 10:26am, i have tried IF(AND()) but i was not able to rationalise it for huge and random data.
Outout should be: 7/13/2013 10:26 a bc 7/13/2013 10:58 a bc 7/13/2013 12:06g hi 7/13/2013 12:17g hi 7/13/2013 12:29g hi 7/13/2013 12:29g h i 7/13/2013 12:37ghi 7/13/2013 13:21ghi 7/13/2013 14:24ghi
creating a macro that would compare two worksheets and their differences would be copied into a third worksheet in the same workbook? Several key criteria is needed:
1) The third worksheet would need to note only the data from the 1st and 2nd worksheets (including headers) that had differences. An additional column would do the difference calculations for the data whereby numeric values are subtracted (worksheet 2 from worksheet 1 values) and non-numeric values would note "Pass" or "Fail".
2) All data values that had differences would be formatted in yellow shading on the third worksheet.
3) The unique ids from column A in worksheet 1 would have to have be noted in column A of the third worksheet; even if they didn't have a difference from worksheet 2.
4) The third worksheet would need to note all of the columns noted in worksheet 1 and include the difference column for each unique column.
5) Flexibility in code to allow for addition of new columns to analysis.
see attached sample spreadsheet whereby Worksheet 1 = "dv file", Worksheet 2 = "price file" and Worksheet 3 = "Error" for purposes of this discussion.
In list 1 the non-matching address is a@spam.com. namely it is not common to both lists. I want to automatically go through the lists and output firstly a new list of the non-matches from column 1 and also a new list of the non-common items from list two.
So in this case the result would be that somewhere there is a new list from list 1 that has "a@spam.com" and secondly there is a new list from list 2 that has "abcdef@spam.com."
Obvioulsy the real list is more complicated and longer but the principle will be the same.
I have a worksheet with five columns (A, B, C, D and E)
The cells in Column B contain letters and/or numbers (without spaces) in no particular order. The cells in Column C contain letters and/or numbers (without spaces) in no particular order.
I want to compare all characters in 1st Cell of Column B with all characters in 1st Cell of Column C, and display the matching characters in 1st Cell of Column D, and the character count of 1st Cell in Column D must be displayed in 1st Cell of Column E. note that multiple instances of the same character must not be treated as duplicates. When execution on 1st Row is finished then repeat procedure for Row 2, etc... Stop execution when first empty cell in Column B is located.
I'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
Can a Function give two or more output variables. e.g.
Sub a() x = 5 result = Y(x) End Sub
Function Y (x As Integer) As Integer Dim B B = ... * x Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that? I need this because function works with large matrix and I want to extract some values appeared in between.
I’m looking for a formula that will give me a figure against the name in column A (name) while looking picking out a specific word within the column B, say "alarm"
So it reads Alan Ingram 1 David walker 3 And so on...
I am trying to do something for a baseball game I am creating. What I am looking for is a formula for one cell that will basically give me a whole number when a certain criteria is met. I am also looking for this cell's formula to get part of it's formula from another cell in the document. So let's use cell A1 has 1.50 in it. I want this other cells formula to be able to give me a 9 if A1 is 0.00-1.50, a 8 if A1 is 1.51-2.79, 7 if A1 is 2.80-4.30, a 6 if A1 is 4.31-5.49 and 5 if A1 is 5.50-500.00.
I want to count a range of cells and if the value of those cells is 5 and over, i want it to give a 1 and if its under 5, i want it to give a 0. I've attached a file of what i'm after, row 13 is where the formula would go, i have just put in the values.
Is there a lookup formula that will give me multiple items? so in my example attachment i want to look up risk from section A to give me the item in section B, but for risk 7 for example it has multiple items (a,b,c), how would i get all them? even better would be if its possible to have in seperate cells
I'm trying to write a formula that searches for the name of the column on one sheet, finds that column on another, then results in the column letter. So, ideally, if the first three columns in the first tab were "Team," "Name," and "Total," respectively, I just want a formula to search for "Name" and give me back "B."
I want to do this in case anybody ever moves the "Name" column, for example, from column B to column C -- so then it would search for "Name" again and change the range in the formula to "C" because that's where that data lives now.
Currently, I'm using it for a COUNTIF() function that is a very simple: =countif(indirect("'"&$A2&"'!K:K"),$B2), where A2 is the sheet name. The latter half of $B2 is fine -- but I would love to have a more complicated formula take the place of the range "B:B" in case the "Name" column ever got moved.
i have =TIME(LEFT(F17,FIND("h",F17)-1),RIGHT(F17,2),0). which gives a time in the format 9:30PM, or 10:30AM etc. How would i change the formula to give me a time minus 15 mins. Eg, if the above formula gave me 8:45PM, i would want it to show 8:30PM
1. The example is cell B1 has a drop down list with the following options: MIN, MAX, AVERAGE, MEAN, SUM
The range F2:F20 hold the values upon which I want the formula to work
Cell B3 is to calculate the result of performing the the function defined in B1 over the data set in F2:F20
What formula do I need in B1. I have tried various of methods of forming the above into a text string and then preceding with INDIRECT but my problem seems to be with the range part.
2. Same as above but I want to the users to write as text (without equal sign) the formula they want to use
I have a spreadsheet, but I need the following formula to make our lives easier here.
I have the following columns:
Rate, I/T/P/S, FT/PT
I need a formula that when I enter "I" for Infant it will give me the FT (full time) or PT (part time) rate. All the columns have drop down menus, so if I choose "I" under the ITPS column and then choose FT, I want the formula to be able to give me the full time rate which is 157.94
