How To Setup Running Number In Single Cell
Oct 22, 2012
example, in sheet1, B12.
already have workbook already coded. which in sheet1 is just a table to record transaction into other sheets. after clicking "keep" button (this 'keep' button already customized/coded) it will updating the particular chosen sheet.
i would like to make a running number in sheet1, b12, and right after clicking the "keep" button it will generate a new number. example if i want the running number start as 6500, i will become 6501 after click the "keep" button
View 1 Replies
ADVERTISEMENT
Sep 13, 2006
I would like to sum the values entered into A1 each time i enter a new value into A1 and to place the grand total, of all values entered, into A3 ? This is as long as the sheet1 is activated ?
i tried with Event (Change/Selection change), but could not get a result......................
View 3 Replies
View Related
Mar 28, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number) Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
View 5 Replies
View Related
Aug 22, 2006
Is it possible to have numbers added to the same cell and have excel continue to calculate the addition for me in that same cell......ex: I have the number 8 in cell d2 and I want to add the number 8 to that cell and have excel add the 8 to the previous 8 for a total of 16 in the same cell.....the next time I would add 5, and the total would be 21? Can this be done in a single cell?
View 10 Replies
View Related
Feb 2, 2009
I have been trying to find a macro that would allow me to keep a running total in a cell by adding a number to that cell and the same cell would display the sum of the numbers entered. {i.e.} If cell a1 has 0 in it and i click on that cell and put 3 in it would display 3 if i added 2 to it it would display 5 and so on. I need it to do this for about 182 cells on one page.I found this macro that runs automatically every time and works great......But only for one cell so far..."D3"...Ugh!!! I need this macro to work for the following range of cells "colums d thru j from row 3 down to 28 in each colum. Each cell is an individual. There are 182 cells total that each need this macro to work ...all on one page
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Static dAccumulator As Double
With Target
If .Address(False, False) = "D3" Then
If Not IsEmpty(.Value) And IsNumeric(.Value) Then
dAccumulator = dAccumulator + .Value
Else
dAccumulator = 0
End If
Application.EnableEvents = False
.Value = dAccumulator
Application.EnableEvents = True
End If
End With
End Sub
As you see the macro includes cell D3 only, I have made several attempts to include more cells but have failed.... I tried like this
If .Address(False, False) = "D3,E3,F3,G3,H3,I3,J3,D4,E4...and so on" Then
I have tried ....If .Address(False, False) = "D3:J3" Then
and I have tried ....If .Address(False, False) = "23Rx7C" Then
I can make it work for cell d3 but not the others. Will I have to repeat this code for every cell?
View 9 Replies
View Related
Apr 10, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
View 14 Replies
View Related
Nov 4, 2011
I am trying to setup a number of cells with a validation list allowing "Yes" or "". I would like the cell value to equal 1 when "Yes" is selected. Is this possible without VBA?
The reason for this is because I want to set up conditional formatting with the tick, cross, exclamation mark icon set (With a tick appearing for "Yes"), but this conditional formatting only works with numerical values.
View 1 Replies
View Related
Oct 5, 2007
I have 3 seperate macros (macro1, macro2, macro3) that have to be run in order. Is it possible to create a macro to run them in order and what would the code look like? I will have it assigned to a button on the worksheet.
View 9 Replies
View Related
Jun 23, 2014
I am attempting to count up the sum of names that will be submitted, through a web form, in a single cell.
Example:
Cell B1 will have a bunch of names submitted to it. let's say 10: Marino, Elway, Namath, Montana, Manning, Brady, Romo, Bradshaw, Favre, Aikman. (these text strings will be all in one single cell)
I will have a list of names that are correct to compare to: Montana, Brady, Bradshaw, Manning. I can put those in its own cell to compare to. (C1)
How do i get the sum of 4 from B1 cell? If B1 only has 3 of the 10, how would it return the sum of 3?
Example:
A1 B1 (Submitted cell) C1 (List to compare to "right answers") D1 (sum from B1 compared to C1)
user 1 Marino, Elway, Namath, Montana, Manning, Brady, Romo, Bradshaw, Favre, Aikman Montana, Brady, Bradshaw, Manning 4
user 2 Marino, Elway, Namath, Montana, Manning, Brady, Favre, Aikman 3
This is I am sure a very newbie question, but I couldn't find anything on multiple text strings within one cell, and counting a sum of those.
View 14 Replies
View Related
Jan 17, 2014
I had some number combinations as this 5-23-34-233, 50-233-34-45, 34-5-23-45-67. The length can be variable in column A.
I want a formula which should return array of numbers of each cell in column A. So if A1 has 5-23-34-233 so the formula should return array like {5,23,34,233} and like wise.
View 8 Replies
View Related
Oct 21, 2007
I am trying to find a way to sort a string of numbers within a cell in numerical order as they are entered,regardless in what order they are entered. Example 123,45,478,12 entered cell, and want it to sort in numerical order as it gets entered in the cell...12,45,123,478,4564
View 2 Replies
View Related
Feb 13, 2008
I have a spreadsheet which has a column that contains route numbers (for collection of goods). Some addresses have 2 or 3 route numbers within the same cell i.e.
3
3 20
3 20 15
I would like to know the formula for counting the number of cells that contain each route number i.e. from above 3 = 3, 20 = 2, 15 = 1
View 5 Replies
View Related
Jan 28, 2010
formula that will return the number of "x"s or "o"s within the same cell.
The cell has values that are formatted in multiple ways for example: PXX--XXP, --XO, OXX--.
I want the formula to return 4 if the cells has PXX--XXP or 3 if the cells has --OXX etc.
View 9 Replies
View Related
May 4, 2014
I am looking for a method to conditionally format a variable number of cells below a single cell into which data is entered.
For example ABC = 6, DEF = 12. Therefore, if I enter ABC into D1 then D1:D6 should be conditionally formatted.
View 3 Replies
View Related
May 22, 2014
I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies
View Related
Sep 19, 2009
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
View 10 Replies
View Related
Oct 20, 2013
I'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
View 2 Replies
View Related
Jan 26, 2012
I need to setup a formula so that a cell is highlighted if two conditions are met. No matter what I do I cannot seem to get it to work.
This is what I'm after. If cell D1
View 1 Replies
View Related
Oct 1, 2013
So here is my code
Code:
Sub Worksheet_SelectionChange(ByVal Target As Range) 'single click version
Range("J3:J32").Interior.Color = RGB(200, 160, 35)
Range("K3:K3").Interior.Color = RGB(200, 160, 35)
If Intersect(Target, Range("J3")) Or Intersect(Target, Range("J4")) Is Nothing Then Exit Sub
ActiveCell.Copy
End Sub
The If statement line gives me a 91 error. Simply right now i'm trying to allocate several squares in the sheet to be cells that when clicked will copy to your clipboard automatically. I can do 1 range easy but now i need to make it a little more advanced.
View 3 Replies
View Related
Apr 10, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
View 2 Replies
View Related
Oct 28, 2013
I have a PO Template, which I use it to issue Purchase Order and keep track on monthly purchases.
This PO template allow me generate a fresh PO with feature of auto "Name" which is the running number for the PO.
However, i have a problem to generate the reference number in the sequence which tirelessly seach a way to work this out.
Below is my current code, as i tried to set my statting code say "87500", the next incremental number just dont generate according to it sequence..
Code:
Sub AddSheet()
Dim strName As String
Dim intNum As Integer, intLastNum As Integer
Dim wsh As Worksheet
Dim lngRow
For Each wsh In Worksheets
[Code]....
View 4 Replies
View Related
Jul 10, 2007
with a code to generate new sheet name and running number.
For example the name can be INF001 then follow by INF002, INF003 .... each time I run the code.
View 9 Replies
View Related
Dec 22, 2007
how to convert date variable to month in running number. the starting date = 1996 Jan =1 and 1996 Feb =2 .... and so on.
as i plan to generate p table report for view more then 12 month data.....
View 9 Replies
View Related
Jan 7, 2009
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
View 9 Replies
View Related
Sep 19, 2007
Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
View 9 Replies
View Related
Mar 30, 2007
I would like to take a date and reduce it to single number. Eg.
Reduce the day to a number. Reduce the month to a number. Reduce the year to a number.
Add the 3 together. This gives you a number.
Reduce this number to a number.
e.g. today's number date 30 / 03 / 2007
Day is 30
Month is 3
Year = 9
Sum of these is 15 which reduces to 6.
3+0+0+3+2+0+0+7=15
1+5=6
Basically 9 is the highest number. The number 13 would be 1+3=4 and so on. The idea is to return a single number between 1-9.
View 14 Replies
View Related
Oct 26, 2012
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies
View Related
Mar 16, 2014
I am trying to count the number of commas in each line of my Excel file. So I first decided to count the total number of rows and then count the number of commas in each row. I wrote this code. But I keep getting an error saying Next without for.
Sub Give_The_Last_Row()
Selection.SpecialCells(xlCellTypeLastCell).Select
LastRow = ActiveCell.Row
[Code]....
View 1 Replies
View Related
Oct 17, 2011
I have in my cell a number, namely, 5260007005020024100055040300004110000000
What I would like to do is extract a set of digits from it,
Starting from the second 2, and shown here in the dots. I need all of the numbers in a separate cell, "52600070050200 .24100055.. 040300004110000000"
Hope this is clear. bearing in mind the number will remain as one so I would need to start at 14 then using LEN or something I'm not sure, extract the following 8 into another cell.
View 5 Replies
View Related
Oct 23, 2012
When I enter the function below as a User Defined Function it gives me a "#NAME?" error. I entered in J12 as:
Code:
"=condense(D12,E12,F12,G12,H12)"
I have values for each column is row 12.
Code:
Function condense(ByVal d1, ByVal d2, ByVal d3, ByVal d4, ByVal d5)
condense = d1 & d2 & d3 & d4 & d5
End Function
How do produce a 5 position number from 5 single numbers?
View 1 Replies
View Related
