I have a list of numbers like
A B C D E
1. 8 1 4 7 6
2. 7 4 6 7 8
and so on. In another sheet I also have numbers such
A B C D E
4 3 8 9 0
I want to be able to compare any numbers that occur in sheet 2 that are in the rows in sheet 1 and turn the cells a colour for example turn the cell green if the number occurs.
I have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.
In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
0
0
I have a list of names for my wedding and am making place cards out of scrabble pieces and need to know how many times each individual letter appears in the 150names to know how many of each letter to buy
View 5 Replies View RelatedI am attempting to create a formula that will count the number of times, lets say letter A, occurs in column E. However, the tricky part that I have been confused on is that I only want to count how many times A occurs between each hour of the day. I need to count number of times "A" occurs between each hour of the day for the entire month.
My Worksheet looks as such: Column A contains the dates for the month of November, Column B contains times that random instances occur, Column C is not important, Column E contains a Letter A-N that pertains to what occurred at a time in column B. SO, Column B and column E coordinate with each other.
Here is an example. Column A - Cell A1 - 11/01/2013 , A2 - 11/02/2013, A3 - 11/03/2013.
Column B - Cell B1 - 12:01 AM , Cell B2 - 14:03 , Cell B3 - 15:23
Column C - Cell E1 - A , Cell E2 - A, Cell E3 - B
So I would like Column F to display that between 12:00 - 12:59 Am there was X number of times the letter A occurred throughout the entire month.
I need a code that search through a column, counts the numer of times a string occurs and creates on another sheet the unique string and the number of times it occured.
e.g
I have this columns in a worksheet
s/n name company trainer
1 ball Dell Mk
2 doll Msed Kl
3 kol Dlink Mk
4 ball Msed Cl
5 Koll Dell Gl
I need the result to appear on another worksheet like this
Name NumberofTraining
Ball 2
doll 1
Koll 2
I have very old file which contains lot of sheets. And I am unable to insert rows in any of the sheets in the file. It throws an error "Cannot shift object off sheet".
View 2 Replies View RelatedIn the middle of one of my subroutines, my function sometimes hits an error (Subscript Out of Range: because it's looking for a string when it is not there).
If this error occurs, I want it to then look for a different string.
So I ONLY want this other string search to occur if I get an error at that point in the code. I've tried "On Error GoTo ....." but it's doing that GoTo everytime, even if no error occurs. I also can't put "Exit sub" before the On Error statement, because there is a lot of code after this point as well.
With Range("H2:H5000")
.FormulaR1C1 = "= SUMPRODUCT(('Data Sheet'!R2C11:R5000C11=RC1)*('Data Sheet'!R2C81:R5000C81=""G - Prior policy incident handling errors""))"
.Copy
.PasteSpecial Paste:=xlPasteValues
End With
Right now its simply counting, but what I need it to do is to sum col L if col A matches col K. Col L contains numbers, and I need a sum of those numbers if the match occurs in A & K.
I am trying to create a formula which would display a date (prior to the computer's system time) when a certain amount of text occurs.
I have attached my workbook with an example and further explanation.
I want to count the occurrence of certain letters in a range of cells. In my attachment I need the sum of how many times the letters "C,M,Y,K" occur in the range A2:D2.
View 2 Replies View RelatedI have a list of data that is the day of the month(1-31) that an event has occurred. (sample data in attachment) I want to find some way to find when the "hottest" time of the month is when the events are occuring.
how to get the end result. I think for myself a chart of some sort would be good to see visually, or some kind of statistical breakdown.
My only requirement is that the list is always being added to, so the end result needs to be updating with the complete list.
Im not an expert in excel, so the more details on how to do this the better. Even better would be creating it in the attachment, and uploading your version so I can see exactly how you did it.
I am going to be taking this idea and apply it in the same way for day of week (1-7) and time of day.
i want to link my stock portfolio to a spreadsheet to make various calculations on historic performance.
my problem is that it is the same cell thats get updated whenever a change occurs, so that there is no history.
let's say i put the DDE-link in cell A1, i would like B1 to be filled with that value
and then when the value changes i would like B2 to be filled with the new value
and the next time B3, and so on.
I have a list of data, integer values ranging from 0 to 36. Imagine a Roulette wheel. The list is long, with over one hundred data points. I would like to view the first 14 data points, and count how many times each value occurs. How many 0's? How many 1's? How many 2's?...How many 36's?
Obviously, many values will have 0 occurrences. Most will have 1 occurrence, some 2, and maybe one or two will have 3 occurrences. I doubt we will see a value with 4 or more occurrences, but it is possible. With this accomplished, I will then note the results. So, that accomplishes the first 14 data points, call them 1-14.
Then, I want to move down the list 1 data point, and repeat the process. So, here I am looking at data points 2-15. Basically, it's the same set of data, with the first point missing, and a new point added on. I will then note the results. I want to continue doing this until the last 14 are viewed.
The following formula is in cell A3: A3=IF(A2="X",A1+365,""). Rather than A3 displaying only 1 year, I would like for it to update after that day occurs to =A1+730, and then A1+1095, and so on.
View 2 Replies View RelatedI'm using this code to run a macro whenever data is entered/removed from a cell within a range. (two macros and two cell ranges).
[Code] .....
Now I need to do the same thing for a different cell range (E3:E52) and a different macro (FormatChart2). Do I need to make a new Private sub or can I add it into the existing code?
Column A: multiple names of people, almost all names occur multiple times Columns B: counts how many times the name occurs in total
What I want in column C: if there are e.g. 18 times the name 'Peter'. I'd like to see in columns C that the first 'Peter' found has 1, the second Peter found has 2, etc; this offcourse for all names...
I have a whole spreadsheet of data which looks confusing so I need to make it look more attractive to the viewer.
I have column A which shows a number of the branch conducting the transaction and the column will contain numerous different branches which I have sorted into branch order.I think there are too many branches to use the conditional formatting condition (probably 5000 different numbers)
What I wish to do is change the colour of the cell when the branch name changes.
For example
Column A= Branch number
123
123
123
345
345
345
456
456
456
789
789
What I need is to highlight all branches 123 with a colour (any colour say red) but when the change in branch number occurs to 345 use a different colour to highlight all the branches (cells) with the number 345 (say grey).Then when the branch changes to 456 use the same colour that highlighted branch 123 (ie red) .Then again when the branch changes to 789 change the colour back to grey again so the spreadsheet shows rows highlighted when a different branch occurs
The above example would look like
Column A
all branches with 123 ( cell highlighted any colour but say red)
branches 345 cells highlighted grey
branches 456 cells highlighted red
branches 789 grey
I am looking for a formula which will find the oldest date for a specific set of search criteria:
A1 A2 A3 A4 A5 A6
05JUL2008 06JUL2008 07JUL2008 08JUL2008 09JUL2008 10JUL2008
B1 B2 B3 B4 B5 B6
Cat Dog Pig Cat Pig Dog
So if possible I would like a formula that searches through and returns
C1 (Search for Pig) = 07JUL2008
C2 (Searcg for Cat) = 05JUL2008
C3 (Search for Dog) = 06JUL2008
I want to isolate text on either side of dashes ( " - " ) that occur either 2 or 3 times in a single cell.
Example:
Apples - Pears - 99 - 100+ years
Bananas - 56 - 57+ years
In particular, I would like to capture the "99 - 100+ years" and "56 - 57+ years" text on its own.
I tried this " =SUBSTITUTE(A1, "*- ", "", 1) but it doesn't work
I am having problems with the function vlookup. I attached an excel file of my problem. It seems to pull the correct lookup, then it pulls the wrong data until a correct one occurs. My excel attachment should make more since of my problem. It will also pull data that is invalid. For example, the name "S5" is not a in my original data so it should not be able to find that?? Sorry, this is hard to explain - let me know if the file is not clear enough.
View 3 Replies View RelatedI am trying to categorize a list of words based on the first letter.
For example:
[Code] ......
I want to see if the letter 'D' in 'Data' occurs in a range from A-G, if so display "A-G" in cell B,
else if the first letter occurs from H-M, display H-N in cell B
else if the first letter occurs from N-R, display N-R in cell B
else display S-Z in cell B.
I am using a count if to look at a column C in a worksheet a and return how many time the word 'on test' occurs. This is then returned to a table in another worksheet. I have 5 worksheets in total with the same columns, how can I do multiple countif - so that it will count all the 'on test' in column C for all 5 sheets.
View 2 Replies View RelatedFirst off I have an excel sheet that I have split into two windows. excel sheet.jpg
I am looking for a formula that will change the bottom sheet number a color if it exists on the top sheet.
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
In a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
I have a time sheet in which i need user to enter a time sheet number in cell c14
I need a formula for that cell so the user can input the time sheet number but only be able to do this if the time sheet number they are imputing is the next number in sequence of the last one used.
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
I have a report generated from an application and am looking to format it into a specific format in order to import it into access to be used in a query. Does anyone know how to write a macro which will:-
1. look for a particular word and delete 1 row above it and 16 rows below it, for every time that word appears on the sheet.
2. Look for a specific number (which can be identified by the total number of digits in it and/or the starting series of numbers) from it’s location to another newly inserted column
4.Finally, count the number of rows between the number moved in step 2 and the next similar number and copy the first number in to number of rows = the number of rows between it and the next similar number.
To get the content of cells in other sheets of the workbook you refer to the 'Name' of the sheet and write e.g.:
[Code] ....
However, I need to refer to the '(Name)' of the sheet rather than the 'Name', i.e. 'Sheet1' rather than 'Fruit', and I would like to do it in a formula not using VBA.
I'm trying to Count duplicate text on sheet 2 and populate the number of times repeated on sheet 1.
On sheet 1 I have A3:A128 and would like the number of times these respective cost centers are repeated in Sheet 2 to populate Column B of Sheet 1.
File attached.
Not sure which formula to use. I tried CountIF but didn't work with 2 sheets.
