i know this is easy but i don't have an idea how to do it. I have dates written on column A1:A7 like
29-Mar-09
30-Mar-09
31-Mar-09
1-Apr-09
2-Apr-09
3-Apr-09
4-Apr-09
what I would like to do is how can I combine 29-Mar-09 and 4-Apr-09 into one cell...I would like the output to be placed in cell A8 appear as "29-Mar-09 to 4-Apr-09".
i need to copy the values from more than one cell and need to paste all the values in the single cell (if possible values seperated by commas).
View 2 Replies View RelatedFor the following formula:
=”TEXT1”&”TEXT2”
The result is:
TEXT1TEXT2
Is there any kind of modifier that I can use to force the output to multiple lines, i.e.:
TEXT1
TEXT2
If this wasn’t a formula I could just use ALT+ENTER. Wrapping the text will not work because I need fixed break points not dependent on the text box width.
I have a column with numbers in each cell. I need to add the same three letters before each of the numbers. Example:
number in cell: 25067 I need it: ABC25067
I did a macro for it but had to do each one individually. I imagine there is a simple formula to do this automatically but I don't know enough to figure it out (despite reading up on it for the last hour!)
I am trying to append data in let's say column A:A with the variable text in J:J. The data in column A:A will look like this /dir/dir/dir/<from this point is where I need the data appended>.
View 4 Replies View RelatedI am trying to join text in two different cells using concatenate function / & operator In the combined cell I want the text from second cell to appear in Bold while the text from first cell should continue to remain in normal font. Is there any way i could achieve this?
View 4 Replies View RelatedI am trying to find a way to create a macro that will take the data selected from the combo box and concatenate it with the data found in cells.
For Example:
Combo Box Selection - "Test"
ID (Column A) - Before
12345
98765
99999
55555
empty cell
23232
ID (Column A) - After
12345 Test
98765 Test
99999 Test
55555 Test
empty cell
23232
I have four different cell.
Cell a1 contains 6 digits
Cell a2 contains 1 digit
Cell a3 contains 6 digits
Cell a4 contains 4 digits.
Cells a3 and a4 may contain a number less than number of digits specified above but are custom formatted 000000 and 0000 respectively to ensure they have the correct number of digits. My problem is when I try to combine the four cells they lose their formatting. I have tried =A1&A2&A3&A4 and = concatenate(A1,A2,A3,A4). But both formulas loose the formatting from the individual cells.
I am trying to change the value in a cell by referenceing it to another sheet. My cell is: Today it is 33F, have a nice day. Now, 33F should be called from another cell and should be inserted in this new cell. If I change the 33F in the other cell this change should be reflected in my text file.
View 3 Replies View RelatedI have two cells. In cell A1 there is a text "(fi) = " and in A2 a number, for example 30. (fi) means a symbol for diameter (letter "f", using Symbol font). Is it possible to joint those two cells in third cell using formula "=A1&A2", maintaining original fonts? What i get is "f = 30", not "(fi) = 30".
View 4 Replies View RelatedThis is not related to macro - it's an excel question regarding wrapped-around text within a cell (i.e.: text brought onto next line by <Alt>+<Enter>)...
SayI have the following in a cell :
Car<Alt>+<Enter>
Truck<Alt>+<Enter>
Van
and say I want to add a figure (in this example 1A) to the first part of the cell and then another to the second line of wrapped text and so on. How can I split the cell (or lookup the first 'wrapped' line) so that I can then perform changes (using formulas with '&' to combine etc or whatever) so that in the end cell have the following:
Car 1A<Alt>+<Enter>
Truck 2C<Alt>+<Enter>
Van 1B
Looking for formula with if then statement that involves a nested formula or concatenation. I need a formula that says: If cell A reads exactly ABCD then concatenate cell A with cell C. Very basic to most of you gurus but I'm fairly new with formulas.
View 3 Replies View RelatedI have been trying to use the concatenate function to join some text strings to a cell on a different sheet - From an input sheet -Sheet 1 named Input, to a Notification Form (Sheet 2). Although the Function Argument display tells me that it will display the result I want it actually displays just the formula. It's a very simple thing
Address 1 10 Downing Street
Address 2 Westminster
Address 3 London
Postcode SW1A 1AA
I want displayed as: 10 Downing Street, Westminster, London, SW1A 1AA in a single merged cell. All I am getting on the Form is =concatenate(Input!c25," ",Input!c26," "Input!c27," "Input!c28). I feel sure that it is a very easy solution but I can't arrive at it!!
I have a document that has 3 colums.
Complete Name | Surname | First Name
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name
Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I am trying to write some VBA to join the values in 2 cells into another cell for a list, however my knowledge at this level is a little lacking. For each row in a list I would like to join the value of the cell of Column A and the value in the cell of Column B and write the output to Column C for that row, as shown in the attached example. Column C in the example shows the expected output.
View 4 Replies View RelatedI have three cells in A2:C2 which require user to input some data.
What I want to achieve is to combine the data from A2:C2 in D2.
C2 is a field which user will input the date. He might key in 21/08/06 or
21/08/06, 30/08/06
I have tried using below formulas in D2 but without success.
=A2&" " &B2&" "&(C2)
=A3&" " &B3&" "&DAY(C3)&"/"&MONTH(C3)&"/"&YEAR(C3) (doesn't work if there are 2 dates.
I have attached a file which shows 3 scenarios if user input 1 date and 2 dates.
For Exempel
A1=B
A2=1
A3="="&A1&A2
I have even tried with concernate and indirect in A3 but no difference there...
I want A3 to return =B1 but it only returns it in text but i want it in form of a formula. Is there a formula that returns text directly into a formula or an easy way to do this?
I have four cells that contain text. All have connected check boxes with TRUE FALSE.
I need to be able to select anyone one of these cells with a check box, and have it's text appear in one separate cell eg: A1.
I have no issue connecting check boxes etc. I have no issue reproducing the text from any of these cells into multiple cells with a check box. But they have to be selectable and reproducing in one cell only (eg"A1").
share a macro to copy cells from range C20:C300 and paste them in C2 on multiple lines. If possible two lines gap between each cell's value when they are pasted in C2.
View 9 Replies View RelatedI have two separate data files that I am trying to combine into one worksheet. One set of data looks something like this:
Column A Column B ColumnC
Date1 Name1
Date1 Name2
Date1 Name3
Date2 Name1
Date2 Name2
Date2 Name3
This is repeated for something like 200 dates, and there could be anything from 1 to 10 lines for each date, for a total of over 1000 rows.
The other data file has this information:
Column A Column B ColumnC
Date1 Place1
Date2 Place2
Date3 Place3
I.e. one line for each date.
I want to combine the data so that Column C contains the Place data. All I could think to do was combine them and then sort by Column A, so I ended up with this:
Column A Column B ColumnC
Date1 Name1
Date1 Name2
Date1 Name3
Date1 Place1
Date2 Name1
Date2 Name2
Date2 Name3
Date2 Place2
And then I would just copy and paste to end up with this:
Column A Column B ColumnC
Date1 Name1 Place1
Date1 Name2 Place1
Date1 Name3 Place1
Date1 Place1
Date2 Name1 Place2
Date2 Name2 Place2
Date2 Name3 Place2
Date2 Place2
Ultimately I want to sort the combined data by Column C, I just have to get the data in there first.
Is there a formula or macro or something I could use to copy the Place names automatically? Each worksheet with 1000 lines and several dozen worksheets means I'd have to copy and paste dozens of thousands of times, which is a bit tedious.
Column A2:A100 contains part description various len lengths max is 50 min is 22.
Column B2:B100 contains scrap qtys.
In column C2:C100 in need to join the text in A and B.
i want the scrap qty's all to be alligned i.e level, as column C is shown in a userformlist box.
meaning joining text/values would look like this (ignore full stops)
dispenser calsberg .........70
tap beer......................... 80
cowl................................100
instead of
dispenser calsberg 70
tap beer 80
cowl 100
I have a multipage control on a userform. On Page 8 of that multipage, I have label1, part of that label is modified by other parts of the program. This is done by the program writing to a sheet of Data and then the program pulls that info into this label. My question is,what is the correct format to populate the label?
see below: This is what I have in my Userform_Activate and Userform_Initialize subs:
CurrentVersion = Sheets("Data"). Range("N2").Value
Label1.Caption = "This will allow you to change the Caption of the UserForms through out the operational program. Some UserForms cannot be changed. The ending of" + Chr(32) + Chr(34) + "Automatic 2005 V" + Chr(32) + CurrentVersion + Chr(34) + Chr(32) + " will be added to what you enter below as default."
CurrentVersion is pulled off of the datasheet which is a number like 5.9.8.2. however it errors "Run time error 13 - type mismatch" I can only suspect the label1.Caption needs something like: Multipage8.label1.caption =
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
I have two columns one of which has filenames and the other having values. I need to creating a macro that takes each value from a cell outputs it into a text file and then saves it with the filename of the cell next to the value. I'll need it to go down the columns and create separate text files for each.
View 7 Replies View RelatedJoin an array with Text elements to create a string that can be Evaluated
So for instance if I have Array("A", "B", "C") and I want to evaluate("=({" & Join(array, ",") & "})="A)"). Is there any way to do this without having to loop or push to a Named array first? I'll even take this evaluate thing if I can do it with text and numbers
I am using the following formula to join several text strings together:
=CONCATENATE(B4,$A$1,C4,$A$1,D4,$A$1,E4,$A$1,F4)
(in the above $A$2 is just a few spaces in order to seperate the test)
I was wondering if there is a way of joing text strings that will align all info properly? Right now it just joiins them together but visually that is not really very appealing.
This is an example of what I am getting:
11 111 1111 11 111
22 2222 22 2222 222
333 33 3333 333 333
This is how I want it:
11 111 1111 11 111
22 2222 22 2222 222
333 33 3333 333 333
I am trying to reference text and another document. The text I want is " stock option expense negatively impacted 1Q:07 by:" and the number i want it to bring back is currently in the model as a percentage. However I would like to bring it back in basis points which would be the percentage times 10,000. So if its in the model as 0.4%, I'd like to bring it back as 40 bps. Here is the formula I am using that is insufficient.
="Stock option expense negatively impacted 1Q:07 by: " & TEXT([FOSL2.xls]QTR!$BK$34,"0") & " bps."
I had a hard time to put a suitable title to this query, not sure if above is good enough for my query. I am entering combination of text and number in a cell using a formula. I am wondering if it is possible to add formula which can format number such that it is displayed in accounting format. Example:
Expected output = Trial 1,000
Using this formula
="Trial "&Sheet1!A1
where A1 in Sheet1 = 1000
Output is Trial 1000
I am trying to write a bit of code to go into a macro and as I am very much a leaner, I thought I would create the formula I need and record it, then copy in the relevant bit. However, I cannot even get the formula to work - never mind the macro bit!! The formula I am trying to do is something like this...
In column S:S
IF the first digit in R2 (and eventually R2 to R lastrow) = 1 to 3, concatenate Q2 (and eventually Q2 to Q lastrow) + "/" + "Q1"
IF the first digit in R2 (and eventually R2 to R lastrow) = 4 to 6, concatenate Q2 + "/" + "Q2"
IF the first digit in R2 (and eventually R2 to R lastrow) = 7 to 9, concatenate Q2 + "/" + "Q3"
IF the first digit in R2 (and eventually R2 to R lastrow) = 10 to 12, concatenate Q2 + "/" + "Q4"
Column R:R has the year and the first digit of Q:Q hold the month so I want to end up with 2007/Q1 etc.
I'm trying to convert a set of numbers between 1 and 9999 into text strings, with the number at the end as a four digit string, so 1 becomes "COLUMN0001", 123 becomes "COLUMN0123", etc. In excel, it would be easy - I would just use the text function and convert the number to a string and append it to the word COLUMN, but as far as I know, there isn't an equivalent function in excel and running excel functions in VBA is notoriously slow (especially as I will need to do this about 360,000 times).
View 4 Replies View Related