i've put this previously on here with no results. There is a formula already in there though does not work because what I want to achieve is to have Column A & Column C to Match Column E & Column F, to Return the Value YES or NO. I’ve Highlighted in ROW 947 one that should Say NO yet Says YES.
I am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L (1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.
I am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
I have values on master sheet and want to link those values to source documents in the same workbook. But the values on master sheets are made up of more than one value on another sheet.
For example on master sheet I have $137,000 that is made up of values in P7 + Q7 + P57 + Q57 on source sheet. If user wants to see where this number is coming from; the user will click the number to go to source document.
On a single valve I linked to the source sheet to a single cell. One thing I was thinking, using conditional format, so if one of the cells is selected in source document the other cells that combine the total of the master sheet cells should be highlighted, just my 2 cents.
I'm trying to take the sum of multiple cells and return it to one single cell using the Vlookup
For Example I want to match the ID numbers from one spreadsheet and use the list of codes to return the value of the sum of all matched numbers. So in this example I would want the number 65 in one cell...
Cells a3 and a4 may contain a number less than number of digits specified above but are custom formatted 000000 and 0000 respectively to ensure they have the correct number of digits. My problem is when I try to combine the four cells they lose their formatting. I have tried =A1&A2&A3&A4 and = concatenate(A1,A2,A3,A4). But both formulas loose the formatting from the individual cells.
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63 17 43 61 63
23,29,53,57,77,79 23 29 53 57 77 79
17,29,63,69,71,75,79 17 29 63 69 71 75 79
11,43 11 43
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
Now the problem, Each client has a sheet in a workbook. In each sheet, I input the number of days of service available to that particular client in a single cell. We'll say cell [G8] is the cell used for this input in all sheets. If the client has 30 days of service available then we type  in cell [G8]. Each sheet is a 100 day template. I want to shade in dark grey and lock from input the days NOT available to the client based on the days of service input in cell [G8]. If 30 days of service are available in cell [G8] then the remaining 70 days on the 100 day template would be shaded dark grey and locked from input. That is, day 31 through day 100 of the template would be locked and shaded. Each individual day has multiple cells in a column. I want to lock and shade each column of cells in each day not available.
I am trying to write some VBA to join the values in 2 cells into another cell for a list, however my knowledge at this level is a little lacking. For each row in a list I would like to join the value of the cell of Column A and the value in the cell of Column B and write the output to Column C for that row, as shown in the attached example. Column C in the example shows the expected output.
I'd like to apply multiple formula to a set of cells on a summary page. My summary page also contains 3 variable dropdowns, and I'd like to display data based on the text selected in those dropdowns (pulling data from 2nd tab "Variables")
The following formula works in the first instance:
=IF(AND(H4="Product Type A1", H6="External", H8="Existing"), Variables!C4, 0)
What I'm struggling to do is add additional formula to the same cell in order to deal with the remaining eventualities of the drop down variables:
Variable 1: Product Type A1 Product Type A2 Product Type B1 Product Type B2
I would like to know if you can point (lots of ) cells to use a formula specified once somewhere else. The problem I have is 6 large formulas duplicated down 6 columns for 7000 rows. This, it turns out has made my file size huge ! Instead of duplicated the formula, can I tell all the cells to use *this* formula, but remembering to increment the references within...
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?