Macro To Append Data
Jan 24, 2010
Hoping for some help in designing a macro to bring in additional data to my master sheet, which is the last step in this project.
I have attached a sample file which includes two sheets. Sheet1 is a sample of the master sheet and includes all the data. The 'real' file has over 100,000 rows. Column A are parcel numbers which idenfity specific properties. These numbers can be repeated if there is more than one improvement on the property.
Sheet 2 are simply the number of fireplaces located within the specific improvement. This 'real' file has about 75,000 rows as commercial and other property types are not included.
What I hope to do is re-write all the data from Sheet 1 onto Sheet 3 with the data on Sheet 2 integrated in, located in column 'AX' or column 50.
Where a parcel number (Sheet 1 Col A) may be repeated, it may or may not be the case in Sheet 2 Col A, I am not sure. However an example of repeated parcel numbers and their respective fireplace counts is as follows:
Sheet 1 rows 111 and 112 list parcel number 3701023511950000. Their cooresponding fireplace data, with the same parcel number (s), on Sheet 2 is located at rows 39 and 40. In this case both show a count of 1.
Sheet 2 rows 127 and 128 list parcel number 3701023541140000. Their corresponding fireplace data, with the same parcel number (s) on Sheet 2 is located at rows 54 and 55. In this case the first parcel shows a count of 2 and the second shows a count of 0 which I would like to reflect as a blank.
I would like to move the results to Sheet 3 in order to preserve the data on Sheet 1, if needed later.
View 14 Replies
ADVERTISEMENT
Aug 22, 2014
I am absolutely new to VBA and trying to create a macro for work. We get daily files with almost the same headers that needs to be consolidated at the end of every month. The headers on the files are usually the same, except at times an extra column may be added at the beginning.
I need a macro to do the following-
Prompt to select the desired files.
Read the headers and append only the desired header columns from these files to a master file(these are Account, User, Modified By, Version). The headers are present in row A. Also, the master file should select the header from the first file only and hence take only the data (row B) from the second file onwards so that the headers are not repeated in the middle in the master file.
In the master table, add a new column at the end which will be the name of the file.
In the master file generated, filter on the column "Version" and delete all the rows except Version="1.0"
Lastly, there are certain values in the excel files that need to be changed. So I need a replace function to change those values.
View 2 Replies
View Related
Jul 10, 2009
I am looking for a macro to convert a 6 digital serial number into an 8 digit serial number by adding "00" to the front. ie. The cell may say 123456, but I need to change it to display 00123456.
Is there a simple way to do this?
View 6 Replies
View Related
Apr 21, 2009
i am making a spreadsheet for recording employee telesales activity each day.
administrators will update a shared workbook each day with the information
employee names are across the top and the activities are down the side (calls, CVs sent, interviews, meetings) each day has it's own block of data. on a friday I would like to run a macro to select these blocks and paste them into the first free row on a separate worksheet.
i have something similar working elsewhere which copies one column and pastes that into the last free column of a new sheet but i have no idea how to do it for rows going down a page. I have attached a file example to clarify.
View 6 Replies
View Related
Feb 6, 2007
I would like to click on my chart, which then gets resized automatically depending on its current size.
Situation:
My main macro creates various charts, all of them I connect to the macro "chartMakro". After the main macro has finished successfully, I can click on such a chart and the macro "chartMakro" is launched, supposedly resizing the chart. unfortunately i do NOT know how to tell the macro which is the active sheet, therefore my macro fails to work.
Question:
When a click on a chart launches a macro, how can I tell the macro which chart called it?
'appending a macro to a chart
' MAIN MACRO
'[...]
activeChart.ChartArea.Select
ActiveWindow.Visible = False
Selection.OnAction = "chartMakro"............
View 4 Replies
View Related
Nov 14, 2009
I am hoping that you can give me a sample code to append data on Excel Worksheets, I have attached my project as a sample, as u can see the code I have here is only to view the Datas on Multiple worksheets but no code for appending the entries.
View 14 Replies
View Related
Jan 25, 2010
I need a macro to do the following
1.Get list of .xls files from specified folder.
2.Append the files in new workbook in same folder.
Ex:
D:/users/excel/Sample_sheet1.xls
D:/users/excel/Sample_sheet2.xls
D:/users/excel/Sample_sheet3.xls
I want to get the list of Sample_*.xls and
create Sample.xls master file which adds the above three .xls as sheets in it.
Actually my macro as below
View 10 Replies
View Related
Jan 18, 2010
I need to create a rule that will append data to the end of a url to pull images for a ecommerce store.
I have a column that needs filled in with a image url.
For example:
Each image url starts with http://www.domain.com/images/150/
Then, it needs the style number, which is in column A, and then a _ and color, which is column B, and then .JPG added to the very end.
The final example url will look like this:
http://www.domain.com/images/150/4035_PINK.JPG
Each row has it own color, so each row will need a unique url to the image location. The data for each url is all in the same row.
So, how can i add a formula to each row so that it will pull the data and add the file extension for each row?
View 9 Replies
View Related
Oct 30, 2006
I could use some help in modifying it so that instead of creating new workbooks to copy to, it copies to EXISTING workbooks whose names match the YEAR ("yyyy") in the Dates fields in column "B" (and only creates new workbooks for non-existing Years, IF needed).
Each workbook name is a "Year" (ie. 2000, 2001, 2002, etc.), and all unique data in A:D are to be copied to each corresponding Year workbook, again as per the Year in the Date field.
I’d like both columns "A" AND "B" tested to make sure that only original (non-duplicate) data is added to the corresponding Year Workbooks (all residing in one folder).
Btw, the code also copies the header, which is ok for new workbooks, but not needed for already-existing wbs.
View 9 Replies
View Related
Feb 23, 2007
if cell in column E contains 'YTD', append value of cell in column D at the end with a space before it (example: " VALUE") to cell in column C. not sure how to go about this. i attached a one row example
View 8 Replies
View Related
Feb 5, 2008
I have two lists of data. The Master data in sheet one and the monthly download in sheet two. I want to create a macro that will identify the new entries in sheet two and add it to the bottom of the list in sheet one.
View 2 Replies
View Related
Apr 8, 2008
I want to append / replace data in cells depending on the initial data.
A cell has the value 3AB00456 XYZ
I want to append the value with My
I want to check to see if the 4th & 5th characters = 00
If YES, I want to append the value with My and replace the rest with just the the 1st 3 characters So the final value would be My3AB
If NO, (the cell has the value 3AB02456 XYZ) I want to replace with a hyphen after the 3rd character and then the rest of the cell value. So the final value would be My3AB-02456 XYZ
I have several worksheets each with a column of about 2000 cells. I want to replace the data in the cells and not create another row with the result.
View 9 Replies
View Related
Jul 20, 2013
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
[code here]
VB:
Sub testtest()
'
'
Dim ws As Worksheet
[Code].....
View 4 Replies
View Related
Jul 4, 2014
I have attached an example workbook where I have three worksheets i.e. Data1, Data2 and Master Data all of which have the same data format in each column
I have data in the Data1, Data2 tabs and was wondering if it is possible to copy the data from both these tabs (using formulas) onto the Master Data bearing in mind the rows of data in the Data1, Data2 can vary on week to week basis.
Excel version 2010
Attached File : Data.xlsx‎
View 2 Replies
View Related
Jul 29, 2008
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet
Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets
If wSheet.Name wAppend.Name Then
LastRow = wAppend.Cells.Find(What:="*", After:=wAppend.Range("A2"), _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
wSheet.UsedRange.Copy Destination:=wAppend.Cells(LastRow, 1)
End If
Next wSheet
End Sub
This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
View 9 Replies
View Related
Jun 7, 2006
I want to copy a bunch of data from a text file and paste in into an excel worksheet I have open. I want to paste it at the end but I don't know how large the data range will be each time so I can't select that size range. I have this code so far:
FileToOpen = Application. GetOpenFilename("Text Files (*.txt), *.txt")
If FileToOpen <> False
Then
Workbooks.Open FileToOpen
Else
Exit Sub
End If
Cells.Select
Selection.Cut
Windows("myfile.xls").Activate
Range("A1").Select 'THIS IS THE OLD CODE FOR THE FIRST IMPORT
ActiveSheet.Paste 'I NEED TO REPLACE THIS WITH THE CODE FOR APPENDING
'OR PASTING AT THE END OF MY RANGE
View 9 Replies
View Related
May 14, 2014
I'd like my macro (in an Excel 2010 workbook) to copy values from three worksheet cells and append them to an existing Access or SQL database file -- without having to leave my Excel spreadsheet or open any other programs. The database file simply needs to be appended. Keeping a running list. That file isn't being used for anything else, we can set it up however is necessary to do this.
For example, Excel cells A1, A2, and A3. Representing Job Name, Job Number and Job Total.
how make VBA do this(in SIMPLE terms)? Or give me a link of where to look or what to search for? I understand VBA but not Access or SQL.
View 1 Replies
View Related
Oct 8, 2012
[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.
View 9 Replies
View Related
Feb 1, 2008
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
View 2 Replies
View Related
Feb 6, 2013
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
View 5 Replies
View Related
Oct 21, 2008
I've got data that should be on own row but its come into my excel file as two rows. This is going to be done daily, as a report so its not just once off, i need a macro or something.
so every second row should be appended to the right of each first row
e.g.
Row 1 First Name
Row 2 Last Name
Row 3 First Name
Row 4 Last Name
Row 5 First Name
Row 6 Last Name
I would like:
Row 1 First Name Last Name
Row 2 First Name Last Name
Row 3 First Name Last Name
View 4 Replies
View Related
Aug 21, 2009
I'm trying to append a bunch of excel files and I'm stuck at this line
View 2 Replies
View Related
Sep 25, 2009
I'm looking to append data from Column A in sheet 8 to the next open column in sheet 7. I know how to append rows, but not columns...
View 4 Replies
View Related
Jul 12, 2006
just wanted to know if there is a way i can append to a cell
for example:
cell f3 contains "what a beautiful"
i would like to know how to add more to it
so the final f3 would look like "what a beautiful day"
View 4 Replies
View Related
Dec 15, 2006
I currently have a workbook named "Staffing Ratio.xls" I want to create a macro that renames the workbook to "Staffing Ratio Value.xls. Essentially anytime I run this macro it will insert the word "Value" at the end of the file.
View 3 Replies
View Related
Jul 4, 2014
I have written the code successfully and it is working fine for me,,But i need to Apply this code into Userform.
View 7 Replies
View Related
Mar 16, 2008
sheet 2 will be the entry form
sheet 3 the database
I would like to copy the values in cells B1:B4 and D4:D5 in sheet2 and paste them transposed it sheet 3 in the next empty row starting in cell A#,
so basically is to copy from sheet 2 and append the data in sheet 3
every time that I press the entry data button, that will allow me to populate the database from a separate sheet
View 10 Replies
View Related
Nov 2, 2009
I'm trying to manipulate a URL in an already opened IE browser window. In a nutshell, I need to change "http://www.excelforum.com" to "http://www.excelforum.com/this-is-the-new-part"
The code prior to this does the following:
- Opens a new instance of IE
- Enters the username and password required to get into the site
- Scrapes the source code, imports it into Excel, and parses the data
- Finds a row based on the current date and some text
- Extracts from that row a unique identifier...
- Obtains the window handle ID for the instance of IE displaying the website
Now I need to add the unique identifier to the url. I cannot open it in a new tab or instance of the browser, as it revokes back to the login screen. I was assuming that the best way to do this would be to get the window handle, then just send a "tab" to get back to the URL, and enter the new URL. If there's any other way to do this, I'm all ears. Otherwise, how can I send the keys using the window handle?
View 2 Replies
View Related
Jul 9, 2008
Is there a way in excel to have it automatically copy a cell 4 times and append _01, _02, etc..
ABCD0001
ABCD0002
and automatically make it look like this:
ABCD0001_01
ABCD0001_02
ABCD0001_03
ABCD0001_04
ABCD0002_01
ABCD0002_02
ABCD0002_03
ABCD0002_04
View 9 Replies
View Related
Jan 14, 2009
I am having problems adding data to exisiting text in each row of column E. The following macro is replacing the current text in each row with "V-1954". I need it to add "V-1954" to the begining of the text in each row of column E not over write it.
Range("D2").Select
Do Until IsEmpty(ActiveCell.Value)
'Fill in Column E
ActiveCell.Offset(0, 1).Value = "V-1954"
'Move down one cell
ActiveCell.Offset(1, 0).Select
Loop
View 9 Replies
View Related
