if cell in column E contains 'YTD', append value of cell in column D at the end with a space before it (example: " VALUE") to cell in column C. not sure how to go about this. i attached a one row example
I want to append / replace data in cells depending on the initial data.
A cell has the value 3AB00456 XYZ I want to append the value with My I want to check to see if the 4th & 5th characters = 00 If YES, I want to append the value with My and replace the rest with just the the 1st 3 characters So the final value would be My3AB If NO, (the cell has the value 3AB02456 XYZ) I want to replace with a hyphen after the 3rd character and then the rest of the cell value. So the final value would be My3AB-02456 XYZ
I have several worksheets each with a column of about 2000 cells. I want to replace the data in the cells and not create another row with the result.
So it's pretty basic. If we simply remember the first ColumnA and ColumnB data, go to the next row, if ColumnA is the same, then ColumnB should be the same. If it's not, then fill with red, go to the next row, repeat. if ColumnA changes, remember the new pair, go to the next row and compare again.
I've thought about this from a scripting perspective, and imagine that something like this would do the job:
Code: sub FindBadTermID () Dim row As Integer Dim dataA as string, dataB as string Set row = 2
I basically want column E to check the cells from left to right and display the value that is in the first populated cell. For example, cell A2 is blank, therefore, it should display the value from B2. A3 & B3 are blank, so E3 should display the value from C3 and so on...
How can I repeat identical data in the previous cell. For example I have in Cell A1 - Marketing then I have in cell A2 to A3 same Marketing but it is not shown. Then I have in Cell A4 - Operations then Cell A5 to A8 same Operations but not shown. I need to have them all shown as in Column B,
I have to keep a record of the running totals of school house points for each week. The problem is that teachers are very lazy and don't record data every week so I have many blank cells which my current formula can't cope with. I've tried using N/A but it doesn’t seem to work? (Have thought about threats of violence but would probably lose my job) I’m if there is no data (blank or 0) then I need it to keep the same total in the cell as the previous week and so on until new data is entered and updates the total. I have attached a simplified copy: Teachers enter points in the HP sheet, the Running Totals sheet (TAB) contains the formula.
I am hoping that you can give me a sample code to append data on Excel Worksheets, I have attached my project as a sample, as u can see the code I have here is only to view the Datas on Multiple worksheets but no code for appending the entries.
Hoping for some help in designing a macro to bring in additional data to my master sheet, which is the last step in this project.
I have attached a sample file which includes two sheets. Sheet1 is a sample of the master sheet and includes all the data. The 'real' file has over 100,000 rows. Column A are parcel numbers which idenfity specific properties. These numbers can be repeated if there is more than one improvement on the property.
Sheet 2 are simply the number of fireplaces located within the specific improvement. This 'real' file has about 75,000 rows as commercial and other property types are not included.
What I hope to do is re-write all the data from Sheet 1 onto Sheet 3 with the data on Sheet 2 integrated in, located in column 'AX' or column 50.
Where a parcel number (Sheet 1 Col A) may be repeated, it may or may not be the case in Sheet 2 Col A, I am not sure. However an example of repeated parcel numbers and their respective fireplace counts is as follows:
Sheet 1 rows 111 and 112 list parcel number 3701023511950000. Their cooresponding fireplace data, with the same parcel number (s), on Sheet 2 is located at rows 39 and 40. In this case both show a count of 1.
Sheet 2 rows 127 and 128 list parcel number 3701023541140000. Their corresponding fireplace data, with the same parcel number (s) on Sheet 2 is located at rows 54 and 55. In this case the first parcel shows a count of 2 and the second shows a count of 0 which I would like to reflect as a blank.
I would like to move the results to Sheet 3 in order to preserve the data on Sheet 1, if needed later.
I could use some help in modifying it so that instead of creating new workbooks to copy to, it copies to EXISTING workbooks whose names match the YEAR ("yyyy") in the Dates fields in column "B" (and only creates new workbooks for non-existing Years, IF needed).
Each workbook name is a "Year" (ie. 2000, 2001, 2002, etc.), and all unique data in A:D are to be copied to each corresponding Year workbook, again as per the Year in the Date field.
I’d like both columns "A" AND "B" tested to make sure that only original (non-duplicate) data is added to the corresponding Year Workbooks (all residing in one folder).
Btw, the code also copies the header, which is ok for new workbooks, but not needed for already-existing wbs.
I have two lists of data. The Master data in sheet one and the monthly download in sheet two. I want to create a macro that will identify the new entries in sheet two and add it to the bottom of the list in sheet one.
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
I have attached an example workbook where I have three worksheets i.e. Data1, Data2 and Master Data all of which have the same data format in each column
I have data in the Data1, Data2 tabs and was wondering if it is possible to copy the data from both these tabs (using formulas) onto the Master Data bearing in mind the rows of data in the Data1, Data2 can vary on week to week basis.
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Dim wAppend As Worksheet, wSheet As Worksheet Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets If wSheet.Name wAppend.Name Then
End Sub This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
I want to copy a bunch of data from a text file and paste in into an excel worksheet I have open. I want to paste it at the end but I don't know how large the data range will be each time so I can't select that size range. I have this code so far:
FileToOpen = Application. GetOpenFilename("Text Files (*.txt), *.txt") If FileToOpen <> False Then Workbooks.Open FileToOpen Else Exit Sub End If
Range("A1").Select 'THIS IS THE OLD CODE FOR THE FIRST IMPORT ActiveSheet.Paste 'I NEED TO REPLACE THIS WITH THE CODE FOR APPENDING 'OR PASTING AT THE END OF MY RANGE
I write a daily status report that adds my daily comment to a cell with previous text in it. I then paste it in three other cells. This process is slow and tedious since the text in the cell is now becoming extremely long due to organizational and managerial restraints of the existing format. I use cut and paste and manual enter, a alt + enter, to space new comment. I would like to be able to enter the text in a cell and have it update the comment cell with the text in it and to update the text box. I have reviewed the forum and have yet to find the answer and use of how else to pose the questions.
I would like to do a SaveAs that includes information from a cell, range("A1") on Sheet("#28 - All Eligible"). The contents of the cell will always be like "Dates of Service 07/01/07 to 09/05/07 - Measure #28 All Eligible". I want my SaveAs file name to concatenate part of that cell. My final result should be "PQRI Totals - DOS 07/01/07 to 09/05/07". The date range would come from my A1 cell. This is what I've written, but it's not working.
I have a filename written in cell A1- eg dog.jpg - and I want to insert a set character string just before the .jpg part. ie so it becomes dog_test.jpg in B1. How would you guys do it? I've been thinking of really long-winded methods that'd use several cells, but I reckon there might be a cleverer way!
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012 Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012 Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
I have data that covers multiple rows that I need to merge into one row.
Header:| InvoiceNumber | Type | Name Row1: | 1000 | Payor | Doe, John Row2: | 1000 | Payor | Smith, Mary Row3:| 1000 | Payee| Jones, Henry Row4:| 1000 | Payee | Jones, Bob
I need to get those four example rows down to one row such as:
Header | InvoiceNumber | Payor | Payee Row1: | 1000 | Doe, John & Smith, Mary | Jones, Henry & Jones, Bob
The number of payor/payee can vary between 1 and several. I need some way to loop through and keep appending the names in one cell separated by a "&". And then deleting all the duplicate rows (based on InvoiceNumber).